OPBERG BOX 56 VAKKEN

Ideal for keeping those small items tidy, screws, washers and shims etc.

Strong snapping lid tops with an overall diameter of 77mm.

Each compartment has a maximum size of 25mm x 23mm.

PERFTEC Bullet PLUG 4.0mm Gold-Plated (2)

RacingLine-RC Tire Cutter Pro - RL-0001

Racingline-RC Tyre-Cutter Haal het maximale uit je nieuwe set banden.

Small two-channel charger Raytronic C50 2×250W was designed with an effort to offer a smart charger with high power and simple and intuitive operation. Raytronic C50 allows to charge and discharge common types of batteries (NiCD, NiMH, LiPo, LiFe, LiHV, Li-Ion, Pb), and is also equipped with 6-channel balancers, which provide safe charging of lithium batteries. The charger has a coloured LCD display and programming button and vial, which will provide you with the possibility of comfortable and very clear parameter settings, control, and watching charging/discharging progress.

Besides compact "handful" dimensions and intuitive controls, the following is worth mentioning:

• Program for new types of "High voltage" lithium (LiHV) batteries with an output charging voltage up to 4,25V
• Powerful balancer with current up to 800 mA
• Optional synchronised operation of both channeůs for charging a single battery with power up to 500 W
• Optional recuperative discharging with high power when charging from a car battery (energy consumed by your charger is used to charge the car battery powering the charger again
• Adjustable output voltage for charging and discharging lithium batteries (allows more gentle charging, as liked by pilots, or, conversely, brutal discharging loved by RC car enthusiasts).
• Programs for charging intelligent batteries for popular DJI drones.

Features:

• Input: 7.28V DC (XT60 connector)
• For charging/discharging 1–16cell NiCd/NiMH, 1–6cell Li-Ion/LiPo/LiFe/LiHV or 2–20V Pb batteries
• Adjustable charging current (0.1–15.0 A) for each channel
• Adjustable discharging current (0.1–3.0 A), or recuperative discharging (0.1–15.0 A) for each channel
• Charging power output up to 2x250W/1x500W for synchronous charging
• Discharging power output up to 2x12W, up to 2x250W for recuperative discharging
• Charging finishing via automatic "Delta-Peak" for NiCd and NiMH batteries
• Lithium and Pb batteries are charged via the "constant current/constant voltage" method
• Adjustable sensitivity of "Delta-Peak" detection for NiCd/NiMH batteries
• Adjustable output voltage for charging and discharging the lithium batteries
• Repeated cyclic charging/discharging or discharging/charging operation for NiCd and NiMH batteries, up to 12 cycles
• 3 lithium battery modes - charging, discharging and charging/discharging for storing. All of this with a balancer or without it.
• Finishing of charging after reaching a set time, temperature or supplied charge
• Memory for any amount of charging/discharging programs
• Internal resistance measuring of individual cells
• Stabilised DC current source (0.1–15.0 A) with an adjustable voltage limit
• Charging programs for intelligent DJI Mavic/Phantom/Inspire batteries
• Ports for temperature sensor (sold separately)
• USB input (5V/2.1A) for smartphone/tablets/etc. charging
• Simple firmware update via USB port
• Backlit coloured LCD display with simple and well-arranged menu, parameter overview during charging/discharging
• Programming button and vial for simple and intuitive setting and controlling the charger
• Warning messages for higher safety - incorrect input voltage, incorrect connection, unsuitable battery or its condition, incorrect polarity etc...
• Incorrect polarity and on-input short-circuit protection
• Forced-cooling fan
• Compact plastic body, very small dimensions

Charger's both channels are equipped with an output XT60 ports and universal ports for service connectors JST-XH, allowing direct connection of battery power cables and service connectors JST-XH for 2–6S packs. If you are using a pack with XT60 and JST-XH connects, you don't need any additional adaptors and cables. To connect service connectors of other systems you can use standard Sky RC or RC System adaptors.

Note: charger uses output voltage of 2.4V/cell for Pb battery charging - for this reason, it is suitable for charging typical lead-acid batteries (car batteries) and gel batteries with reversible valve. NOT SUITABLE for charging gas-tight gel batteries charged with a maximum of 2.3V/cell.

Specifications:

RC-Parts RC14006-BLK Tool Stand Aluminium zwart voor 20 gereedschappen

ROBR14002Transport Bag 1/10
Kunstof bakken.

Dimensions :

Whole bag : 550x500x260mm

Main Tray : 510x135x240mm

Additional Trays : 250x130x340mm

When heading to the skate park, into the woods or your favourite bash pit, you don't want to burden yourself with bulky and unnecessary equipment. On the other hand, you don't want to go home early because of any minor issues, and that's where Ruddog's new 19-in-1 tool set comes in handy. The compact tool bag houses a selection of screwdriver, hex and socket head driver bits, a rubberized ergonomic grip and a double-ended open mouth wrench in popular sizes, which allows you to make quick repairs and adjustments far away from your workbench. Small price, small size, big benefits!

Includes:

• Hex Drivers: 1.5mm | 2.0mm | 2.5mm | 3.0mm | 3.5mm | 4.0mm 
• Nut Drivers: 4.0mm | 5.0mm | 5.5mm | 7.0mm | 8.0mm 
• Cross Head: 00 | 0 | 1 size 
• Flat Head: 2.0 | 3.0 | 4.0 size 
• Spanner: 5mm | 8mm 
• Ratcheting Rubber Handle

Ruddog 3mm Washer Set 0.5mm/1.0mm/2.0mm (12pcs· Blue)

Ruddog 3mm Washer Set 0.5mm/1.0mm/2.0mm (12pcs·Orange)

SCHILDERPENCEEL-MIDDEL --FIJN-MMC

• Inhoud 20ml
• Viscositeit middel
• Hart zeer snel uit
• Geschikt voor hout, rubber, kunststof en metaal
• Universeel bruikbaar

SHIMS 5 X 8 X 0.1 - 10 STUKS

SHIMS 8 X 11 X 0.2 - 10 STUKS

Short type Nut Driver 7.0mm for Professional Electric Power Drive

soldeerbout 80watt met led display Keramische Heater en mogelijkheid om kop te wisselen.

T-PLUGGEN - 2 PAAR

TAFEL LED LAMP 3 STANDEN VAN LICHT STERKTE INCL USB VOEDINGSKABEL.

Telescopische Magneet Pen met LED lamp

Sterke telescopische magneet pen

Verstelbaar van 17 cm tot 63 cm.

Hoort thuis in iedere gereedschapskist, hobby kamer, auto etc. etc.
Haalt schroefjes, sleutels en gereedschappen met de magneet uit plekken waar je met je handen niet bij kan.

de magneet tilt tot maar liefst 2.5KG!

Er zit een LED lamp bovenop inclusief batterijen in de magneetstok.

A practical tool holder in elegant black for up to 15 different screwdrivers and with two slots and a larger circular hole for a wide variety of tools. The resistant, but at the same time light material make this holder the ideal helper in your own workshop.

Technical Specifications