53825, TA07 Pro BC12/BC13 TB EVO IV As TT02 S

53906 Alu Ball Connector (5) blue anodized

XV-01/T Halfcardan assen achter 39 mm (2)

De set bestaat uit een tuning aandrijfassen en wielassen.
De cardan minimaliseerd de wrijving van de aandrijfassen. (Onder andere meer snelheid)

Geschikt voor de volgende Tamiya chassis:
- XV-01 (58528)
- XV-01 Pro (58526)
- XV-01T (58552)
-TT-02R
-TT-02RR

Leveromvang:

• 2 stuks wielassen (9804648)
• 2 stuks 42mm aandrijfassen (53505)
• Kleine onderdelen voor de aandrijfassen (51444)
• Instructieblad

Houd er rekening mee dat deze set niet compatibel is met het XV-01 TC chassis

54550 TT-02/B Schaftschraube 3/18mm (2) Low Fr.

This wheel axle and axle ring set offers smoother rotation for less power loss. It removes potential problems caused by loose parts that were used in the previous generation of axle shafts that used a set screw to hold the pin in place. These parts can be fitted to the swing shaft in your existing universal shaft set.

• Wheel Axle for use with axle ring x2
• Axle Ring x2
• Can be used on M-Chassis, TT-02, DT-03 and DF-03 chassis cars fitted with universal shafts - use in place of wheel axle in Items 53597, 53791 or 53792.
• Can be used as a direct replacement for Item 53497 or 53681.

54776, RC aluminium demperhouder - 1 mm omhoog type

C Reinforced Racing Tires Soft 24mm 2Pcs

Hier zijn de opties voor 24 mm brede zachte compoundbanden voor bestuurders van toerwagenmodellen. Het ontwerp is voorzien van een interne stoffen riem om vormverlies bij hoge snelheden tegen te gaan, en het product wordt geleverd in een hersluitbare zak.

• Versterkte racebanden (zacht / 24 mm) x2
• Zachte compoundbanden voelen zich thuis op koelere wegen.
• Bij banden is nummer 1 in hun zijwand gegoten.

Tamiya nummer: 54994

5MM BLUE ALUMINUM BALL CONNECTOR.

Ball-End Adjusters are used in partnership with threaded shafts to allow swift and convenient adjustment of a range of components on R/C models. Tamiya’s classic design ball-end adjusters have been updated with this new design consisting of an open-face, which are open on both sides of the connector to allow easier access when working on your model. Their design and reinforced material give improved durability. 2 sizes are available!

• Open Face 5mm Reinforced Adjusters (Medium) x8
• Length: 11.5mm
• May require filing down when used on some models.

Ball-End Adjusters are used in partnership with threaded shafts to allow swift and convenient adjustment of a range of components on R/C models. Tamiya’s classic design ball-end adjusters have been updated with this new design consisting of an open-face, which are open on both sides of the connector to allow easier access when working on your model. Their design and reinforced material give improved durability. 2 sizes are available!

• Open Face 5mm Reinforced Adjusters (Long) x8
• Length: 15mm
• May require filing down when used on some models.

Tamiya Set van 4 Slick A

Artikelnummer: 53433-SET
EAN: 0086544915789

Omschrijving:
Set van 4 banden Slick A geschikt voor o.a. Tamiya Cup Euro TW.

Set bestaande uit:
- 2 x 53433 Slick A
- 2 x 53435 Insert hard
- 1 x 54852 1:10 Velgen (4) 18-Sp. Geel 24mm

Leveringsomvang:
- 1 Set Tamiya Set van 4 Slick A

These spacers are designed to gain even greater precision in your touring car model tread setup (the width between the wheels), with these 0.5mm/1.0mm spacers.

Contains Aluminum Wheel Spacers 0.5mm (4) 1.0mm (4) 
Altering the tread of the car allows you to modify the stability of the model.
Aluminum parts offer excellent durability and rigidity.
Compatible with touring car R/C models.

Aluminium stopmoeren blauw 5st. m4

TA07 Pro BE9

Aluminum Adjustable Servo Horn
Met deze Tamiya verstelbare aluminium claxon kunt u de stuurgeometrie van uw racewagens chasseren. U kunt het stuurbereik afstellen door de hoogte van de arm op de servo saver te verhogen of te verlagen.

- Servo Horn A, B & C componenten x1 elk
- Hi-Torque Servo Saver Spring (Large) x1
- Hi-Torque Servo Saver Springs (kort) x2
- Hi-Torque Servo Saver gegoten onderdelen x1
- Hiermee past u de afstand aan tussen het midden van de servohoorn en de kogelverbinding in stappen van 1 mm tussen 15 mm en 22 mm.
- Werkt ook als servo saver en helpt de servo te beschermen in geval van botsingen en stoten.
- Kleine onderdelen voor bevestiging inbegrepen.
- Compatibel met chassis-auto's TA07, TB-05, TT-02, TT-02B, M-07 Concept, M-06, M-05, CC-01, GF-01 en G6-01 *.

TAMIYA band op velg gelijmd 2st.

This is a lightweight version of the standard body parts set of the popular electric powered Raikiri GT model (Item 58626). Made from 0.8mm polycarbonate as opposed to the standard 1.0mm, it will give your R/C racing car model a lower center of gravity, thereby improving its performance.

• 0.8mm thickness polycarbonate.
• 0.8mm thickness Racing Wing α parts (Item 54457) are included, with stay mounts allowing different setups.
• Marking stickers, plus masking stickers for use when painting are included.
• Compatible with 257mm wheelbase R/C touring car chassis.

Omvang van de levering:
- 1/10 Schaalmodel carrosserie Ford Focus RS 2003 RS257

TAMIYA Clamp Type Alu Wheem Hub (9mm Thick/2Pcs)

These are 4mm wheel hubs used in many of Tamiya’s RC on-road cars. They replace the standard plastic hub found in stock kits. A slit is provided in the wheel hub, and the gap is tightened with a cap screw. This method of attachment more securely fixes the wheel axle to the hub thereby dropping the 2 x 10 mm stainless steel shaft when removing the wheel is impossible. Furthermore, because it is made of aluminum, you get more accuracy, rigidity, and precision when mounting wheels to your car.

Tamiya wheel hubs are available in 4mm, 5mm and 6mm widths to give you different offset wheel options and tuning possibilities.

TAMIYA Clips verschillende grote