C/F Rear Shock Mount - Neon SCHUMACHER

Alloy Hub Carrier (Black) - Mi7,Mi8,FT8 (pr)SCHUMACHER
Optional alloy hub carrier for the Mi7 and Mi8, improved strength and precision.

Now hard black anodised as shipped from 01/02/2021.

Perviously green hard anodised.

Diff Spacer Set - A2/3,E4/5,Icon/2 SCHUMACHER
Diff spacers for pan cars.

Includes;

1 x 2.0mm
3 x 0.5mm

M3 Black Alloy Washers 0.5mm (pk12) Item No. U4862 SCHUMACHER

King Pin Spacer - Icon/2 (pr)SCHUMACHER

SPEED PACK - M3x8 Cap Hd (pk10) SCHUMACHER

Alloy Radius Arm - FT8 SCHUMACHER

Longitudinal Stiffening Post - FT8 SCHUMACHER

Titanium Rear Axle (pr) - FT8 SCHUMACHER

SCHUMACHER C/F Upper Link Mount 1 Dot - Mi8,FT8 (pr)

Optional link mount for Mi8 and FT8 used in higher traction for more response and steering.

This differential/spool eccentric allows you to adjust the height of the diff/spool to a new 'High' position compared to the standard kit 'Low' position. 

The smart looking piece as normal is used to adjust the belt tension, as well as being able to fine tune the feeling of the car.

Normally a higher front spool smooths the steering response compared to the standard low kit setting.

A higher rear diff can give the car more drive out of the turns keeping it flatter.  A low standard position normally gives a little more side bite.

A worthwhile item to have available to tune your Mi7 to different track conditions. 

SCHUMACHER-C/F-Bumper-Crash-Stop-Mi8,FT8

Alloy-M3-Turnbuckle-25mm-Black-(pr)SCHUMACHER

Threaded Steel 10g Weight 17.60mm (pk4)

SCHUMACHER Complete Diff - Mi8,FT8

SCHUMACHER Hub Carriers - Mi7,Mi8,FT8 (pr)

C/F Rear Link Mount LH - Mi9

SCHUMACHER-C/F-LiPo-Swivel-pr-Mi7-Mi9,FT,FT8,LD3,ST2

C/F-Gear-Diff-Axle-A1-3,Icon/2-SCHUMACHER
Carbon Fibre axle for the Icon and Atom gear diff.

Lightweight for the ultimate performance.

8g lighter than kit steel version.

Xray Xlp2 Silicone Hyper Resistant Shock Absorber Membrane (4)

Xray Hex Screw 110° Sfh M3x8 - Cnc Machined - Hudy Spring Steel (4)

Xray Hex Screw 110° Sfh M3x5 - Cnc Machined - Hudy Spring Steel (4)

MR33 Brass Battery Weight Plate 30g (1)

MR33 Brass Battery Weight Plate Short 20g (1)

Met deze plaat kun je gemakkelijk en snel 20g gewicht onder je batterij plaatsen.

Inhoud: 1 messing batterijgewicht 20g

MR33 Flat Sensor Wire 125MM

Platte en flexibele MR33-sensorkabel voor het aansluiten van snelheidsregelaar en borstelloze motor.

 Selecteer gewoon de gewenste kabel in het vervolgkeuzemenu!

Verkrijgbaar in de volgende versies:

50 mm (MR33-FSW50)

75 mm (MR33-FSW75)

100mm (MR33-FSW100)

125mm (MR33-FSW125)

150mm (MR33-FSW150)
175mm (MR33-FSW175) 180mm (MR33-FSW180)

200mm (MR33-FSW200) 225mm (MR33-FSW225) 275mm (MR33-FSW275)

MR33 Super Flexible Sensor Cable 125MM

Superflexibele en ronde MR33-sensorkabel voor het aansluiten van snelheidsregelaar en borstelloze motor.

 Selecteer gewoon de gewenste kabel in het vervolgkeuzemenu!

Verkrijgbaar in de volgende versies:

75 mm (MR33-SFS75)

100 mm (MR33-SFS100)

125 mm (MR33-SFS125)

150mm (MR33-SFS150)

175 mm (MR33-SFS175) 180 mm (MR33-SFS180)

200mm (MR33-SFS200) 225mm (MR33-SFS225) 275mm (MR33-SFS275)

Xray Composite Steering Block For Carbon Extension Plate - Graphite

Xray Composite Steering Block For Carbon Extension Plate - Medium

Xray Alu Lower Susp. Holder For Hs Bulkhead - Wide - Front-front

Xray Alu Lower Susp. Holder For Hs Bulkhead - Wide - Front-rear

Xray Carbon Shock Tower For Hs Bulkhead - 2-dots - Front

Xray Anti-roll Bar - Short - 2.0mm

Xray Adjustable Turnbuckle 50mm M3.5 L/r - Hudy Spring Steel™ (2)

Xray Carbon Shock Tower For Hs Bulkhead - 3-dots - Rear

Xray Xb4 Alu Chassis 2.0mm For Low Profile Bumper - Swiss 7075 T6

Xray Composite Front Bumper Aligned With Chassis

22050 XV-02 Versnelling Diff 06 Spoor (70T)

54343, M-Chassis Lightweight Freewheel Axle(2) Serviceartikel

54239, M-05/05RA Stabilisator Set voor/achter (2+2)

54969 33mm LW Alu. Swing Shaft

33mm LW Alu. Swing Shaft

Deze duralumin schommelassen zijn ontworpen voor universele assen M-07 en M-08 chassis, wat bijdraagt aan een efficiëntere en duurzamere aandrijflijn!

Item Inhoud / informatie
• 33 mm lichtgewicht aluminium zwenkassen x2
• Aandrijfpen en dwarsaspositie zijn 90 graden van elkaar verwijderd voor soepeler draaien onder vermogen.
• Componenten krijgen de iconische Tamiya blauw geanodiseerde afwerking.
• Compatibel met M-08 Concept- en M-07 * -chassis.
• * Voor M-07R-chassisauto's zijn de items 51444 en 51445 vereist.

Tamiya nummer: 54969

51564, TRF419 Uitgang stijve diameter (2) Dienstverlenende artikelen

From Penguin Custom Bodyshells is the Optus MTC Body.

Specifically designed for the MTC class for cars such as the Schumacher NEON.

Specifically designed with CAD for optimum performance and symmetrical design, the Optus provides great stability and fast lap times! 

The body is made from 0.75mm high quality polycarbonate. 

The kit includes the rear wing, which is made separately to ensure consistent thickness, window masks, headlight decals and sun visors as seen on the body.

Supplied clear with overspray film.

Hot Race 1:12 Foam Tire Front T-Foam Edition - Soft Rims

Hot Race 1:12 Foam Tire Rear T-Foam Edition - Soft Rims

Hot Race 1:12 Foam Tire Rear, T-Foam Edition

Hot Race 1:12 Foam Tire Front, T-Foam Edition

Robitronic Assortment Case 8 compartments variable 186x125x43mm

The ideal way to bring order to your workshop. This handy sorting and storage box made of environmentally friendly PP plastic offers enough space for spare parts and accessories. The quick-release fastener on the side perfectly protects the contents from falling out and with the freely usable partitions you determine the space distribution.

Technical Specifications:

Robitronic Assortment Case 10 compartments variable 134x100x29mm

The ideal way to bring order to your workshop. This handy sorting and storage box made of environmentally friendly PP plastic offers enough space for spare parts and accessories. The quick-release fastener on the side perfectly protects the contents from falling out and with the freely usable partitions you determine the space distribution.

Technical Specifications:

LRP 2s-charging Wire - 60cm - Xt60 & Xh | 4/5mm & 2mm

LRP 2x 2s-charging Wire - 60cm - 4mm & Xh | 4/5mm & 2mm