NIEUW

Alu chassis brace is used to adjust the chassis flex. It is recommended for both alu and graphite chassis to fine tune the car flex for particular track conditions. There are 4 flex adjustment possibilities – Soft, Medium, Stiff and Extra stiff.

Recommended for low, medium and high traction conditions.

Brass chassis brace is used to adjust the chassis flex. The brass brace has the same features as the alu chassis brace but at the same time it works also as an additional weight as it is 15g heavier and is positioned in absolute center of the chassis.

Recommended for higher traction conditions as the weight is positioned more in the rear of the car.

There are 4 flex adjustment possibilities – Soft, Medium, Stiff and Extra stiff.

Alu chassis brace is used to adjust the chassis flex. It is recommended for both alu and graphite chassis to fine tune the car flex for particular track conditions. There are 4 flex adjustment possibilities – Soft, Medium, Stiff and Extra stiff.

Recommended for low, medium and high traction conditions.

Brass chassis brace is used to adjust the chassis flex. The brass brace has the same features as the alu chassis brace but at the same time it works also as an additional weight as it is 15g heavier and is positioned in absolute center of the chassis.

Recommended for higher traction conditions as the weight is positioned more in the rear of the car.

There are 4 flex adjustment possibilities – Soft, Medium, Stiff and Extra stiff.

"Twister"  car body for Touring 190mm by Xtreme Aerodynamics.

It is molded with high quality polycarbonate, with heated aluminum molds made with high precision 5-axis milling cutters. Made in a light version to respect the weight, including the wing, of the ETS rule. Particularly important are the rear supports which do not allow the wing to flex when subjected to a high load.

ETS legal weight!

Bittydesign Magnetic Body Post Marker Kit - Color : Black - BDBPMK10-B

Designed for the T4'20, this holder for the receiver and the transponder, allows to add 33 grams of weight where they are necessary. It also prevent the battery from interfering with the belt.

- Fixing through 1 screw;
- Built-in 0.5 Shim to mount the holder up and allow flexibility to the chassis ;

CARSON Carson Lexan Scissors - Curved - 500013305

XRAY ULP ALU SHOCK ABSORBER-SET - BLACK (2) - 308308-K

Tamiya’s Racing Factory designers have a very specific and focused goal. Provide Tamiya’s hardened and lifelong fan base state-of-the-art radio control racing products. The TRF420 is Tamiya’s successor to the popular TRF419 series which included the TRF419, TRF419X, and the TRF419XR. Our design team have come up with a host of brand-new parts designs that ensure this racing chassis takes the TRF Series of products to a different level.

• 1/10 scale 4WD R/C touring car chassis model assembly kit.
• 2 belt-driven 4WD drivetrain utilizes rear gear differential and front/center direct pulley.
• New gear diff pulley and case parts provide a weight savings of 1.5g,
• Less oil leakage from newly designed diff parts.
• Front direct pulley and direct holder are made from an integrated plastic part for a weight savings of 2g compared to previous designs using separate parts. Direct cups are screw-attached, allowing their replacement without the need to remove the direct pulley component.
• New double cardan universal shaft design.
• Employs a carbon fiber double-deck frame (2mm thickness upper and lower decks) for just the right balance of flex characteristics.
• New suspension arm design, which use bushing inserts to allow different lever ratios.
• Rear arms are 3mm offset to the rear, allowing a shorter lower deck and increased traction.
• New adjustable suspension mounts and plastic bushing design. Changing the bushings allows a huge range of toe, roll center and caster angle settings.
• An updated steering linkage is now paired with a new steering pivot component, for easy tweaks to the steering setup.
• New Bearing holders (on gear diff and front direct pulley) provide more precise location and a super-smooth drivetrain.
• The bumper design has been altered so as not to impact chassis' roll characteristics.
• New body mounts are 2mm offset; change their attachment position for different body mount location and fine tuning of your car's center of balance.
• New Lightweight wheel axles weigh approximately 1.5g less than predecessors and allow a choice between clip or grub screw fastening.
• New suspension shafts are made of durable stainless steel. At 3mm in diameter, they are thicker than previous 2.6mm parts for a sturdier suspension setup. They have a continuous groove for easier grub screw attachment.
• New 2-part front upright designs utilize separate arm and bearing housing components.
• New rear uprights are redesigned for use with 3mm diameter shafts.
• New front hub carriers have been revised specifically for this chassis, with greater resistance to shocks and crashes. They are also compatible with 3mm diameter shafts. Upper and lower flanged tubes are now identical.
• Required to complete: 190mm GT body set, 24mm wheels and tires, 2-channel radio, servo, ESC, 7.4 racing battery and compatible charger, and 540-size racing motor.

XRAY XT4 FRONT DRIVE SHAFT 99MM WITH 2.5MM PIN - HUDY SPRING STEEL - 325317

Hiro Seiko T4'20 Bruno Edition Screw Set [Black] - 48578

XRAY T4'20 GRAPHITE UPPER DECK 1.6MM - 301061

New T4'20 ALU LOWER 2-PIECE SUSPENSION 0.25 ECCENTRIC HOLDER

• 0.25° Eccentric suspension mount holes
• More precise toe-in setting
• SWISS 7075 T6 Aluminum
• Black coated
• Laser engraved

Authentic XRAY alu rear lower suspension holder for the REAR of the front bulkhead, with 0.25° eccentric suspension mount holes. The eccentric holder stands allow more precise toe-in setting with 0.25° increments.

Suspension holders are CNC-machined from premium Swiss 7075 T6 aluminum, and provide the lightest & strongest possible support framework for the car.

Fits: T4’20

T4’20 Fixed Pulley for Layshaft with Bearings 20T - Graphite (2)

* Specially-formulated
* Graphite composite Material
* Increases Performance
* 20T
* Reduces friction
* For layshaft with bearing

Precision-molded 20T layshaft pulley made of specially-formulated graphite composite material that is a perfect balance of reliability and performance. The special graphite composite mixture reduces friction and increases performance. Orange color. Set of 2.

Fits T4’20

Rush PreGlued Carpet Tyres 30CPM

RUSH Tyres especially selected for carpet racing. Pre-Mounted and expertly glued with a lightweight foam insert and a stiff RUSH wheel. Great life and excellent traction.

Hiro Seiko Power Cable 60cm Copper - 13AWG - 48081

XRAY BALL JOINT 4.9MM - EXTRA SHORT OPEN (4) - 303457

XRAY T4'20 ALU REAR LOWER 1-PIECE SUSPENSION HOLDER - REAR - RR - 303723

XRAY T4'20 ALU REAR LOWER 2-PIECE SUSPENSION HOLDER - FRONT (1) - 303730

XRAY T4'20 ALU MOTOR MOUNT - 303760

XRAY HIGH-PERFORMANCE DRIVE BELT 3 x 351 MM - 305435

XRAY HIGH-PERFORMANCE LOW FRICTION KEVLAR DRIVE BELT 3 x 351 MM - 305436

XRAY ALU SOLID LAYSHAFT WITH BEARINGS - 305523

XRAY FIXED PULLEY FOR LAYSHAFT WITH BEARINGS 20T (2) - 305578

XRAY ALU SERVO MOUNT - BLACK - 306204

XRAY ALU SERVO MOUNT - BOTH SIDES THREADED - 306208

XRAY GRAPHITE FLOATING SERVO HOLDER NARROW 3.0MM - 306234

XRAY ALU UNIVERSAL MOUNT - 306410

XRAY T4'20 ALU TOP DECK MOUNT - 306517

XRAY FRONT SUSPENSION ARM LONG LEFT - GRAPHITE - 302174-G

XRAY T4'20 ALU STEERING POST FOR DUAL SERVO SAVER (2) - 302537

XRAY ALU SHIM FOR RADIAL PLAY ADJUSTMENT OF STEERING ARM (2) - 302544

XRAY T4'20 ALU FRONT LOWER 1-PIECE SUSPENSION HOLDER - FRONT - FF - 302713

XRAY T4'20 ALU FRONT LOWER 1-PIECE SUSPENSION HOLDER - REAR - FR - 302723

XRAY T4'20 ALU LOWER ADJUSTMENT BULKHEAD - FRONT R / REAR L - 302766

XRAY T4'20 ALU LOWER ADJUSTMENT BULKHEAD - FRONT L / REAR R - 302767

XRAY T4'20 ANTI-ROLL BAR FOR BALL-BEARINGS - FRONT 1.2 MM - 302812

XRAY T4'20 ANTI-ROLL BAR FOR BALL-BEARINGS - FRONT 1.3 MM - 302813

XRAY T4'20 ANTI-ROLL BAR FOR BALL-BEARINGS - FRONT 1.4 MM - 302814

XRAY T4'20 ANTI-ROLL BAR FOR BALL-BEARINGS - FRONT 1.5 MM - 302815

XRAY T4'20 ULP GRAPHITE SHOCK TOWER REAR 3.0MM - 302960

XRAY REAR SUSPENSION ARM LONG RIGHT - GRAPHITE - 303173-G

XRAY REAR SUSPENSION ARM LONG LEFT - GRAPHITE - 303174-G

XRAY ALU ANTI-ROLL BAR BUSHING - 6MM (2) - 303433

XRAY T4'20 GRAPHITE CHASSIS 2.2MM - 301000

T4’20 chassis is designed and developed for the centrally positioned layshaft. The chassis is completely redesigned to work with the narrower mounting bulkheads and allows to mount both longer suspension arms as well as optional short arms.

The alu solid chassis gives better control, stability and makes the car easier to drive in high traction carpet conditions.

Extensively tested and recommended for high- and very-high traction tracks, this narrow chassis is CNC-machined from 2mm premium Swiss 7075 T6 and additionally black coated.

XRAY T4'20 ALU FLEX CHASSIS 2.0MM - SWISS 7075 T6 - 301002

XRAY T4'20 GRAPHITE UPPER DECK 2.0MM - 301060

XRAY ALU UPPER DECK COLLAR FOR FLEX ELIMINATION - 301172

XRAY T4'20 ALU UPPER CLAMP WITH 2 ADJ. ROLL-CENTERS (L+R) - 301550

XRAY T4'20 ULP GRAPHITE SHOCK TOWER FRONT 3.0MM - 301960