XRAY T4 2020 Opties

XRAY ULP ALU SHOCK ABSORBER-SET - BLACK (2) - 308308-K

Xray ALU CAP FOR XRAY SHOCK BODY #308322 - BLACK (2)

Xray ALU SHOCK CAP-NUT WITH VENT HOLE - BLACK (2)

Xray Spring-Set C = 2.2 (2)

Machined 30g pure tungsten chassis weight. The weights are smaller than the brass weights and are easier to install with a cleaner layout. The super small weights result in lower CG comparing to standard weights. 

Produced from very rare and heavy pure tungsten material, not a typical tungsten mixture. The pure tungsten has the highest density structure and is the heaviest metal material which allows to design smallest size weights comparing to any other materials.

Quick & easy attachment to chassis. Marked with weight value for easy identification.
 

Composite body back stop set for 1/10 touring cars (electric or nitro), made from lightweight composite material, provides support for the rear of body shell to prevent tucking under the rear wheels due to a collision from the rear, thus reducing lost racing time and increasing body lifespan. Posts are quickly & easily mounted, and are trimmmable for perfect fitment. Set of two, includes mounting hardware.

XRAY ALU 7075 HEX SCREW M3x10 (6) - 375392

Tamiya TRF Wiel nut 4mm Serrated (8) Black

Hiro Seiko Pinion - 64DP - 25t Alu - MoS2 coated - 48269

Hiro Seiko Pinion - 64DP - 26t Alu - MoS2 coated - 48270

Hiro Seiko Pinion - 64DP - 27t Alu - MoS2 coated - 48271

Hiro Seiko Pinion - 64DP - 28t Alu - MoS2 coated - 48272

Hiro Seiko Pinion - 64DP - 29t Alu - MoS2 coated - 48273

Hiro Seiko Pinion - 64DP - 30t Alu - MoS2 coated - 48274

Hiro Seiko Pinion - 64DP - 31t Alu - MoS2 coated - 48275

Hiro Seiko Pinion - 64DP - 32t Alu - MoS2 coated - 48276

Hiro Seiko Pinion - 64DP - 33t Alu - MoS2 coated - 48277

Hiro Seiko Pinion - 64DP - 34t Alu - MoS2 coated - 48278

Hiro Seiko Pinion - 64DP - 35t Alu - MoS2 coated - 48279

Hiro Seiko Pinion - 64DP - 36t Alu - MoS2 coated - 48280

Hiro Seiko Pinion - 64DP - 37t Alu - MoS2 coated - 48281

Hiro Seiko Pinion - 64DP - 38t Alu - MoS2 coated - 48282

Hiro Seiko Pinion - 64DP - 39t Alu - MoS2 coated - 48283

Hiro Seiko Pinion - 64DP - 40t Alu - MoS2 coated - 48284

Hiro Seiko Pinion - 64DP - 51t Alu - MoS2 coated - 48295

Hiro Seiko Pinion - 64DP - 52t Alu - MoS2 coated - 48296

Hiro Seiko Pinion - 64DP - 53t Alu - MoS2 coated - 48297

Hiro Seiko Pinion - 64DP - 54t Alu - MoS2 coated - 48298

Hiro Seiko Pinion - 64DP - 55t Alu - MoS2 coated - 48299

Hiro Seiko Pinion - 64DP - 56t Alu - MoS2 coated - 48300

Hiro Seiko Pinion - 64DP - 57t Alu - MoS2 coated - 48301

Hiro Seiko Pinion - 64DP - 58t Alu - MoS2 coated - 48302

Hiro Seiko T4'20 Bruno Edition Screw Set [Black] - 48578

RC 5mm Shim Set - 3 Types

These shim sets may be used to reduce suspension or wheel axle slop in any of Tamiya's on or off-road vehicles. Perfect for super fine tuning your race vehicle build.

Afmetingen:
- 5mm inner
- 7mm outer
- 10 pcs  0,1 mm
- 10 pcs 0,2 mm
- 10 pcs 0.3mm

Hiro Seiko M3x5 Titanium Hex Socket Button Head Screw (5) - 69678

Hiro Seiko M3x6 Titanium Hex Socket Button Head Screw (5) - 69679

Hiro Seiko M3x8 Titanium Hex Socket Button Head Screw (5) - 69680

Hiro Seiko M3x10 Titanium Hex Socket Button Head Screw (5)

Hiro Seiko M3x12 Titanium Hex Socket Button Head Screw (4)

Hiro Seiko M3x16 Titanium Hex Socket Button Head Screw - 69684

Hiro Seiko M3x5 Titanium Hex Socket Flat Head Screw (5) - 69686

Hiro Seiko M3x6 Titanium Hex Socket Flat Head Screw - 69687

Hiro Seiko M3x8 Titanium Hex Socket Flat Head Screw (5)

Hiro Seiko M3x10 Titanium Hex Socket Flat Head Screw (5)

Hiro Seiko M3x20 Titanium Hex Socket Flat Head Screw (3)

Bittydesign 1/10 Body Clips Kit 8pcs Orange - BDBC-8O(4x Left + 4x Right)

Axon Spur Gear TCS 64P 114T - GS-T6-114

De MR33 Low Friction Belts (Bando riemen) maken de aandrijving van uw middenmotor touringcar nog soepeler en efficiënter. Dankzij het hoogwaardige materiaal van Bando hebben de riemen bovendien een zeer lange levensduur. Speciaal aanbevolen voor alle stock klassen (kan natuurlijk ook gebruikt worden in modified als de riemspanning juist is).

Inhoud: 2 x MR33 Low Friction Bando riemen (lengte: 351mm, vertanding: 117)

These nice titanium wheel nuts from MR33 are looking a little different than others and they have a bigger diameter. That means that they will secure the wheels better and there will be also less vibrations when you use these MR33 wheel nuts on your racecar!

Contents: 4 MR33 titanium wheel nuts.

A new line of 3 Battery plates is added to the already existing OfficinaRC 32g (OFC-004).

These battery plates are designed to give all the possible balancing possibilities for your models.

Usable for all categories On road and Off road thanks to the diversity of weight they allow an optimal balance for all needs.

The OfficinaRC 23gr (OFC-005) 131mmx34.5mmx0.6mm is designed to be used with a standard measurement battery. This plate can be applied using double-sided tape on the battery or directly on the chassis.