NIEUW

TAMIYA 5mm Ball Connector: 43514 - 4pcs - 9804205

5MM BALL CONNECTOR: 43514

TAMIYA 5MM ALUMINUM BALL CONNECTOR - 53642

5MM BLUE ALUMINUM BALL CONNECTOR.

TAMIYA TC-01 ALUM STEERING ARMS - 54958

The steering arms found in the TC-01 chassis are made out of plastic. This upgraded version is made of machined aluminum which changes the steering feel of your car and provides smoother operation. Use the upgraded part for a sharper handling feel.

• Aluminum Steering Arms Left & Right x1 each
• These precision, lightweight aluminum parts can be used in place of the kit-standard plastic components T4 and T7. They give secure attachment, as well as direct steering feel and superior durability.
• Tamiya blue anodized finish.
• Recommended for use with the aluminum steering bridge in Item 54957.
• Compatible with TC-01 chassis cars.
• Ball bearings are not included. 850 (8x5mm recommended)

TAMIYA CARBON REINFORCED G PARTS - 54593

These gears for the TB-04 chassis are made of carbon fiber-reinforced resin material, making them more resistant to wear and therefore suited to use with higher-powered motors.

• 40T Carbon Fiber-Reinforced Ring Gear x1
• 16T Carbon Fiber-Reinforced Bevel Gear x1
• 20T Carbon Fiber-Reinforced Miter Gear x1
• Compatible with TB-04 chassis cars.
• For best performance, it"s best that gears be installed as a set, and not individually.

TAMIYA TC-01 DBL CARDAN PROP SHAFT - 54961

This Hop-Up Option is for use with the TC-01 chassis. It helps to contribute to more efficient drive-line efficiency compared to using the kit standard dog-bone set up.

• Crafted in durable and rigid steel, this component can be used in place of kit-standard dog bone and cup parts, which provide true rotation at a range of angles for free, efficient power.
• Compatible with TC-01 chassis cars.
• Please note that this set contains parts to assemble one shaft. Two sets are required to complete the upgrade from front to rear.

TAMIYA TC-01 ALUM ROCKER ARM POSTS - 54963

These rocker arm posts replace the stock Tamiya TC-01 chassis posts, which will reduce overall weight to your machine.

• Aluminum Rocker Arm Posts x4
• These are precision, lightweight aluminum parts, which lighten the chassis by nearly 2 grams.
• Components have a hard-anodized finish for durability.
• Compatible with TC-01 chassis cars.

TAMIYA TC-01 ALUMINUM ROCKER ARMS - 54955

This Hop-Up Option is for use with the TC-01 chassis, and helps to contribute to improved suspension feel. Compared to the standard plastic parts, these parts have less flex which contribute to more direct feel from the suspension.

• Aluminum Rocker Arms x2
• Lightweight and rigid aluminum arms can be used in place of kit-standard plastic components, boosting damper performance and improving suspension feel.
• Parts have Tamiya blue anodized finish.
• Compatible with TC-01 chassis cars.
• Requires TWO sets to compete one car with front and rear rocker arms.

ZooRacing Touring Car Rear Wing Set (3) - ZR-0010

ZooRacing 3-piece 190mm Touring Car Wing Set

 

ZooRacing have announced the release of their new 3-piece wing set that includes three different design wings to fine-tune the aerodynamics of most of today’s 1/10th scale 190mm touring car bodies. Included are the wing of the ultra-popular DBX/PreoPard/ZooZilla series, the highly-curved HellCat rear wing as well as the new BayBee rear wing, all moulded from high-quality polycarbonate.

 

Also included are a total of six polycarbonate endplates. Using the set comes in handy especially when running ZooRacing’s ultra lightweight 0.5mm bodies that greatly profit from the tougher and less flexible rear wings as they improve overall downforce without adding too much weight. In addition the different shapes of the wings allow to fine-tune the aerodynamic balance if conditions call for it.

 

The wing set is usable with all 190mm touring cars that use a 100mm wing post spacing – being it originals or rip-offs.

TAMIYA TC-01 Formula E Gen2 ChLivery Body met certificaat - 51660

This is a spare body parts set of the 1/10 scale FIA Formula E Gen2 race car. It is specifically designed to fit the Tamiya TC-01 chassis machine.

• Polycarbonate body. Rear wing and side parts, with halo and side mirrors molded as separate components in polycarbonate-ABS (white).
• Stickers included to decorate your car in the futuristic looking Championship Livery scheme.
• Compatible with TC-01 chassis cars only.

TAMIYA TC-01 ALUM STEERING BRIDGE - 54957

The steering bridge found in the TC-01 chassis is made out of plastic. This upgraded version is made of machined aluminum which changes the steering feel of your car and provides smoother operation. Use the upgraded part for a sharper handling feel.

• Aluminum Steering Bridge x1
• This precision, lightweight aluminum bridge can be used in place of the kit-standard T9 plastic part. It boosts overall chassis rigidity and smooths out handling.
• Tamiya blue anodized finish.
• Recommended for use with the aluminum steering arms in Item 54958.
• Compatible with TC-01 chassis cars.

TAMIYA TC-01 Stabilizer Set - 54956

This Hop-Up Option is for use with the TC-01 chassis, and helps to contribute to superior cornering stability.

• Soft (1.1mm), Medium (1.2mm) & Hard (1.3mm) Stabilizer Rods x1 each
• Aluminum hex head ball connectors allow easier adjustment.
• The stabilizer can be employed on the front or the rear, helping the car balance going through corners. It fits snugly between the upper cover and the chassis, and clearance can be adjusted via the 3x3mm grub screws.
• Black base color rods have color markings to differentiate their stiffness.
• Compatible with TC-01 chassis cars.
• Requires TWO sets to compete one car with front and rear sway bars.

TAMIYA TC-01/TB-05 39mm Cardan JointShaft (2) - 42372

These double cardan shafts promise super-efficient power and enhanced durability for your touring car chassis model. They are designed to fit the Tamiya TC-01 and TB-05 chassis machines. They may also be used with Tamiya cars outfitted with the TRF 419 (Tamiya Racing Factory) Suspension Upgrade Set or the TA05 & TA05IFS Short Reversible Suspension Set.

• Assembly type 39mm Double Cardan Joint Shafts x2
• Dual joints ensure that rotation is efficient, and the motor's drive is transmitted to the wheels with minimal power loss.
• Black finish.
• Needle pin length has been increased from 9.8mm to 10.8mm, for improved durability when using separately sold Item 54921 Reinforced Swing Shaft Caps.
• Compatible with TC-01 and TB-05 chassis cars, or those using Items 54886 or 54083.

TAMIYA TC-01 Titanium Screw Set (76) - 47449

This titanium screw set is for the TC-01 chassis. It contains 76 screws of different types, which are in total roughly 13g lighter than kit-standard steel equivalents. They employ Hex heads to enable even more secure tightening compared to Philip head screws in the original kit.

• 3x5mm Titanium Hex Head Screws x4
• 3x6mm Titanium Hex Head Screws x6
• 3x8mm Titanium Hex Head Screws x18
• 3x10mm Titanium Hex Head Screws x13
• 3x12mm Titanium Hex Head Screws x12
• 3x6mm Titanium Hex Head Countersunk Screws x5
• 3x8mm Titanium Hex Head Countersunk Screws x10
• 3x10mm Titanium Hex Head Countersunk Screws x8
• Compatible with TC-01 chassis cars.

Hudy Alu Nut M4 - Blue (10) - 296540-B

Hudy Alu Nut M4 - Blue (10)

SkyRC Setup System - Black - 600069-26

SkyRC set-up system fits all 1/10 touring cars. It is designed for precisely measure and set your cars’ camber, toe, steering and caster. A well-adjusted car will show a great performance on track and help you win races.

SkyRC Setup System - Black

YellowRC Xt60 Female To Tamiya Charge Cable 12awg 300mm - YEL6024

YellowRC Xt60 Female To Tamiya Charge Cable 12awg 300mm

YellowRC Xt60 Female To Ec5 Charge Cable 12awg 300mm - YEL6022

YellowRC Xt60 Female To Ec5 Charge Cable 12awg 300mm

YellowRC Xt60 Female To Xt90 Charge Cable 12awg 300mm - YEL6023

YellowRC Xt60 Female To Xt90 Charge Cable 12awg 300mm

YellowRC Xt60 Female To Deans Charge Cable 12awg 300mm - YEL6020

YellowRC Xt60 Female To Deans Charge Cable 12awg 300mm

YellowRC Xt60 Female To Ec3 Charge Cable 12awg 300mm - YEL6021

YellowRC Xt60 Female To Ec3 Charge Cable 12awg 300mm

TAMIYA 1/10 Ford Mustang GT4 (TT-02) Kit - 58664

1/10 Ford Mustang GT4 (TT-02) Kit

Geïnspireerd door de Ford Shelby GT350R-C, is de Ford Mustang GT4 ontworpen om te concurreren in GT4-racen over de hele wereld. Aangedreven door een 5.2-liter V8, en met een 6-traps sequentiële paddle shift transmissie, multimatische ophanging en aerodynamisch verfijnde body, snijdt de Mustang GT4 een opwindend figuur. Nu maakt het een triomfantelijke entree in het Tamiya-assortiment van R / C-modellen. Het TT-02-chassis is aanpasbaar en leuk om te rijden - een goede keuze om aan de slag te gaan met R / C-touringcars!

Over het model

• Dit is een assemblagekit voor het R / C-model met 1/10 schaal. Lengte: 459 mm.
• De gespierde vorm is vastgelegd in polycarbonaat en is ontworpen met toegang tot de CAD-gegevens van de eigenlijke auto voor buitengewone nauwkeurigheid. Voor en achter lichte gevallen zijn ook gegoten in polycarbonaat.
• Wielkasten zijn voorgesneden voor een eenvoudiger montage van de carrosserie.
• De beginnersvriendelijke, zeer flexibele TT-02 is een veelzijdig en eenvoudig te onderhouden 4-assig chassis met asaandrijving.
• Afzonderlijk gegoten plastic onderdelen geven de achtervleugel en zijspiegels weer.
• Racy 10-spaaks wielen zijn gegoten in gun metal en gecombineerd met slick-banden.
• Stickers zijn inbegrepen om een ​​originele kleurenprint te maken, net als maskerende stickers voor gebruik bij het schilderen.
• Een uitgebreid aanbod van TT-02 optie-onderdelen biedt een aantal mogelijkheden om uw auto te tunen.

Tamiya nummer: 58664

TAMIYA 1/10 RC TT-02R Chassis Kit - 47326

De getunede uitvoering!

Deze verbeterde versie van de TT-02 chassis bevat een schat aan tuning onderdelen en een aantal nieuwe onderdelen.
De race-onderdelen zijn de wielomhanging, motorsteun, de aandrijfassen, differentieel uitgangen, etc .. De ophanging bevat metalen onderdelen en dempers zijn CVA oliegegevuld. De veelzijdigheid enhet gebruiksgemak van de TT-02 blijven.

Inbegrepen tuning onderdelen:
Nieuw ontworpen aluminium achteras houder met 3 graad spoor
Aluminium motorsteun

53159 4mm Aluminium stopmoer (Blauw)
53.642 5mm Aluminum ball Connector (Blauw)
54247 3x18mm Aluminium Turnbuckle Shaft (Blauw) x2
54500 TT-02 High Speed Gear Set (68T)
54501 TT-02 Aluminium aandrijfas
54502 TT-02 Aluminium meenemer voor aandrijfas

Over het model
RC kit in 1:10 schaal
Nieuw ontwikkelde achterfusee met 3 ° hoek voor meer stabiliteit in de bocht.
Soepel lopende middenaandrijving door aluminium as met alu-cups.
CVA olie dempers in zilver met zwarte veren.
Modieuze 10-spaaks wielen .
Houdt u er rekening mee dat de body, accu, motor en RC apparatuur niet in de kit aanwezig zijn.

Xtreme 1/10 Twister Speciale Clear Body 0.7mm (190mm) - MTB0415-07

The very popular and successful Twister body from Xtreme Aerodynamics got an update to reach even more performance on the track! The new body is now called “Twister Speciale” and received only some small changes during its further development. But these changes are resulting in more corner speed, more rotation and more top speed! Give it a try and you will feel the difference!

 

The “Twister Speciale” ist now available in 3 different weight categories:

• MX-MTB0415-07 Xtreme 1/10 Twister Speciale Clear Body 0.7mm (190mm) perfect for ETS!
• MX-MTB0415-06 Xtreme 1/10 Twister Speciale Clear Body 0.6mm (190mm) light.
• MX-MTB0415-05 Xtreme 1/10 Twister Speciale Clear Body 0.5mm (190mm) extra light.

Xtreme 1/10 Twister Speciale Clear Body 0.4mm (190mm) - MTB0415-04

The very popular and successful Twister body from Xtreme Aerodynamics got an update to reach even more performance on the track! The new body is now called “Twister Speciale” and received only some small changes during its further development. But these changes are resulting in more corner speed, more rotation and more top speed! Give it a try and you will feel the difference!

 

The “Twister Speciale” ist now available in 3 different weight categories:

• MX-MTB0415-07 Xtreme 1/10 Twister Speciale Clear Body 0.7mm (190mm) perfect for ETS!
• MX-MTB0415-05 Xtreme 1/10 Twister Speciale Clear Body 0.6mm (190mm) light.
• MX-MTB0415-04 Xtreme 1/10 Twister Speciale Clear Body 0.5mm (190mm) extra light.

CORERC DOUBLE SIDED TAPE - 3 MTRS - CR750

Widely regarded as the best type of tape in the industry. Easily adheres electrics to chassis, this clear tape is now available from CORE RC.

Relatively large roll at 3 metres in length but still suitable to fit in your tool bag with ease.

Sticks extremely well and peels off in one piece with no residue.

3m roll.
25mm width.
55mm diameter when new.
Approx 1mm thick.

ABSIMA T-plug (Deans) female battery plug to Tamiya male plug - 3040021

ABSIMA T-plug (Deans) female battery plug to Tamiya male plug

YellowRC Lipo 5200mah 7,4v 2s45c Hardcase Deans Plug, Yel2652 - 2652

YellowRC Lipo 5200mah 7,4v 2s45c Hardcase Deans Plug, Yel2652

Proline Hoosier G60 Sc M4 Dirt Oval Sc Mod (2) Sc F/r - 10153-03

Proline Hoosier G60 Sc M4 Dirt Oval Sc Mod (2) Sc F/r

Proline Protoform Aluminum Wing Mounts For 1:10 Bodies Gun Metal, Pr6054-00 - 6054-00

Proline Protoform Aluminum Wing Mounts For 1:10 Bodies Gun Metal, Pr6054-00

Xray Team Carrying Bag - V2, X397231 - 397231

Xray Team Carrying Bag - V2, X397231

SkyRC Nc1500 Aa/aaa Battery Charger / Analyzer - 100154-01

SkyRC Nc1500 Aa/aaa Battery Charger / Analyzer

Orion Charging Cable BEC,22AWG 60cm - ORI40024

Orion Charging Cable BEC,22AWG 60cm

Orion Charging Cable XT60,16AWG 30cm - ORI40036

Orion Charging Cable XT60,16AWG 30cm

Orion Charging Cable Futaba/Universal,22AWG 60cm - ORI40025

Orion Charging Cable Futaba/Universal,22AWG 60cm - ORI40025

Orion Charging Cable TRX,16AWG 30cm - ORI40023

Orion Charging Cable TRX,16AWG 30cm

Orion Charging Cable Super Plug (Deans),16AWG 30cm - ORI40022

Orion Charging Cable Super Plug (Deans),16AWG 30cm

Orion Charging Cable Tamiya,16AWG 30cm - ORI40021

Orion Charging Cable Tamiya,16AWG 30cm

Orion 4mm 2S Pro Balance Charge Lead (45cm, 10AWG/20AWG) - ORI40059

2S Lipo charge lead with 4mm charger input plugs and 4mm battery plugs, including 2mm balance plug 450mm. Extremely versatile, suits a wide range of chargers!

Orion 5mm 2S Pro Balance Charge Lead (45cm, 10AWG/20AWG) - ORI40058

2S Lipo charge lead with 4mm charger input plugs and 5mm battery plugs, including 2mm balance plug 450mm. Extremely versatile, suits a wide range of chargers!

Proline Pre-Cut 1967 Ford F-100 Race Truck Heatwave Edition Tough-Color (Black) Body for Unlimited Desert Racer - 3547-18

Proline Pre-Cut 1967 Ford F-100 Race Truck Heatwave Edition Tough-Color (Black) Body for Unlimited Desert Racer

Matrix 1/10 EP 36R Rubber Tire Pre-glued 4pcs Asphalt - EPA036

TAMIYA TC-01 A Parts (Body Mounts) (2) - 51661

TC-01 A Parts (Body Mounts) (2)

TAMIYA TC-01 B Parts (Bumper) (1) - 51662

These are the C/D spare parts for the TC-01 chassis. They feature suspension arm, knuckle and rocker arm components among other useful spares.

TAMIYA TC-01 C/D Parts Suspension (2) - 51663

These are the C/D spare parts for the TC-01 chassis. They feature suspension arm, knuckle and rocker arm components among other useful spares.

TAMIYA TC-01 Universal Propeller Shaft (1Set) - 54975

TAMIYA TC-01 Universal Propeller Shaft (1Set)

ABSIMA Tamiya female battery plug to T-plug (Deans) male plug - 3040022

Tamiya female battery plug to T-plug (Deans) male plug

Ride Instant Glue Spot Nozzles - RI-RP-201

Ride Instant Glue Spot Nozzles

TAMIYA 1/10 RC Subarua BRZ R&D Sport 2014 TT-02 - 58578

1/10 RC Subarua BRZ R&D Sport 2014 (TT- 02)

Hoofdkenmerken:

• Wielblokken met de vorm van een remschijf geven het chassis een zeer realistisch uiterlijk.
• Onafhankelijke ophanging uitgevoerd met dubbele draagarmen, olie-dempers en L/R identieke draagarmen en uprights voor gemakkelijke montage en onderhoud.
• Zowel de motor als de accu zijn in de lengterichting geplaatst in het ABS-kunststof chassis voor een uitstekende balans.
• Montage van de uprights kan aangepast worden om 4 mm extra grondspeling te verkrijgen voor rally racing.

Specificaties & kenmerken:

• Schaal: 1/10
• Constructie type: bouwkit
• Gebruik: on- road
• Aandrijving: 4-WD
• Aandrijfsysteem: tandwieloverbrenging
• Aandrijflijn: as
• Differentieel type: tandwiel
• Ophanging: onafhankelijk opgehangen
• Stuurmechanisme: stuurhevel
• Schokdemper: olie gevulde demper
• Materiaal schokdemper: kunststof
• Type band: rubber
• Type profiel: slick
• Body materiaal: polycarbonaat (lexaan)
• Materiaal chassis: kunststof
• Elektronische snelheidsregelaar (ESC): inbegrepen
• ESC type: TBLE-02S
• Ledvoorbereid: nee
• Ledverlichting: nee
• Motor: 540 borsteltype Torque Tuned Motor
• Lagers: kunststof glijlagers
• Instelbaar camber: vast
• Instelbaar toe-in: alleen voor
• Instelbare grondspeling: ja
• Instelbare overbrengingsverhouding: ja
• Instelbare wielbasis: ja
• Instelbare breedte: ja
• Instelbare schokdemperpositie: ja
• Special feature 1: Stickerset en raammaskers inbegrepen.

Benodigd: 7,2 V rijaccu & lader
Benodigd: 2-kanaals zenderset

SkyRC LED Pit Light (Black) - 600089-01

The SkyRC LED Pit Light features convenient touch sensitive controls with three color temperature modes and six adjustable brightness / dimming levels.

Incorporating 32 high-powered LED’s using around 11 watts power, the LED Pit Light provides clean, stress-free lighting equivalent to a 100 watt incandescent bulb. The LED technology eliminates the harsh whites of florescent lighting and high-heat commonly associated with close proximity lighting.With an elegant, stylish, foldable and rotatable design, the adjustable joints can be placed in almost any position without tightening or loosening knobs or screws, simply move the light to where you need and the lamp will hold to form.

Specifications
DC Power Cable Input Voltage
6-15V
USB Cable Input Voltage
5V/2.1A
Max Power
11 Watts
Brightness
180-600 Lumens, 5 steps
Color Temperature
3000K, 3500K, 4000K
Dimension
281x60x314.5mm
Weight
460g

TAMIYA 1:10 Land Rover Defender 90 CC-01 - 58657

Een andere grote naam sluit zich aan bij de RC wereld van Tamiya namelijk de Land Rover Defender. De Defender is een afstammeling van de originele Land Rover-auto's die voor het eerst werden uitgebracht kort na WW0II. Het model recreëert een vroege versie van de Defender 90 (kortere wielbasisvariant).

De Defender 90 wordt geleverd inclusief een lichtunit (T53909)!!!!

Modelgegevens:
- Bouwkit schaal 1/10.
- Lengte: 457mm
- Breedte: 200 mm
- Hoogte: 214 mm
- Wielbasis: 242 mm.
- De klassieke Defender 90-vorm wordt nauwkeurig weergegeven door de polycarbonaat body, met oog voor veel details.
- Inclusief extra gegoten onderdelen zoals radiator, zijspiegels, schijnwerpers en spatborden
- Compatibel met 5 mm diameter LED's (wit) x2 voor koplampen en 5 mm diameter LED's x6 voor de achterzijde.
- Mat verchroomde wielen met banden met een authentiek loopvlakpatroon.
- Zeer betrouwbaar CC-01 chassis (4WD-systeem) en dubbel wishbones aan de voorzijde
- Achter 4-link vaste ophanging (pendelas met diff.)
- uitgerust met 4 CVA oliedempers.
- Een uitgebreid assortiment optionparts is beschikbaar om het CC-01-chassis aan te passen naar je persoonlijke wensen.
- ESC: TBLE-02S
- TLU-01: Ja
- Zender: Nee
- Ontvanger: Nee
- Servo: Nee
- Motor: ype 540
- Batterij en oplader: Nee
- LED: Ja