Muchmore Super Flexible Sensor Cable 135mm for Brushless ESC

Muchmore Racing Super Flexible Sensor Cable can be bent naturally. In general use in ESC and brushless motors are available. Especially when used in 1/12th, 1/10 F1 you can get less interfernece betweeen motor mount and chassis.

Neoprene, zip up bags to protect your set up board during transportation. With cool branded look! Also make great laptop bags.

40x30cm

MR33 Droop Blocks

The "Droop Blocks" are needed to adjust the suspension travel of 1/10th scale onroad vehicles together with the MR33 Circle Droop Gauge (MR33-CDG). The vehicle is placed on the 10x10mm thick blocks and then the suspension travel can be perfectly read and adjusted on the gauge. The blocks can also be used with other gauges that require 10mm droop blocks!

1:10 RC au TOM'S GR Supra (TT-02)

De Toyota GR Supra GT500 werd in de GT 500 serie opgenomen en als opvolger van de Lexus LC500 ontwikkeld. Het moderne aerodynamische design en de Neon-Lackierung maken dit model tot een hoogtepunt in de serie. Als basis dient dem 58703 TAMIYA model in een schaal van 1:10 het TT-02 Chassis. Hiermee zijn de radiostand, de botsvrijheid, de sporing en het stuur volledig instelbaar en met de vele optionele Tuning-elementen kan het chassis eenvoudig tot een racer worden getuned. De 4WD-aandrijving met centrale uitlaat, dubbele Querlenker en Federbeine op alle vier de wielen zorgen voor een optimaal rijgedrag en een optimaal rijgedrag. De Chassisunterseite is extra strak vormgegeven en de batterijlader sluit alle gangbare accu's aan. Optisch hoogtepunt zijn de Radmitnehmer, die angesetzte Bremsscheibenattrappen haben. Benötigtes Zubehör: Fernsteuerung mit Empfänger, Lenkservo, 7.2V NiMH Akkupack, Ladegerät, Farbe für Polycarbonatkarosserie (TAMIYA PS-)
Tamiya kondigt met trots de release aan van de Toyota GR Supra GT500 als een 1/10 R/C modelbouwpakket gebaseerd op het TT-02 chassis. De GR Supra GT500 werd ontwikkeld in overeenstemming met de GT500 klasse reglementen als vervanger van de LEXUS LC500 die floreerde in drie seizoenen van 2017 tot 2019. Met het gestroomlijnde autodesign van de roadgoing GR Supra, beschikt deze raceauto over een carbon monocoque frame, speciale aerodynamische componenten en transmissie, plus een 2.000cc inline 4-cilinder turbomotor met directe injectie "RI4AG."

Over het model
- Dit is een 1/10 schaal R/C modelbouwpakket. Lengte: 466mm, breedte: 188mm, hoogte: 125mm. Wielbasis: 257mm.
- De krachtige vorm van de GR Supra GT500 is in stijl gevangen door een lichtgewicht, stijve polycarbonaat body (helder) met aparte polycarbonaat koplampbehuizingen (LED's zijn niet te bevestigen) en canards.
- Afzonderlijke zwarte ABS-hars onderdelen geven op realistische wijze de kenmerkende zijspiegels en een grote achtervleugel weer.
- Het model maakt gebruik van het as-aangedreven 4WD TT-02 chassis dat een superieur aanpassingsvermogen en stabiliteit biedt.
- 12-spaaks gun metal wielen zijn gecombineerd met race slick banden.
- Inclusief item 51007 (Urethaan Bumper M (TT-01/TGS)) om de carrosserie in topconditie te houden.
- Wordt geleverd met stickers en maskeer stickers voor gebruik in de paint job

Tamiya nummer: 58703

TC030 1/10 BMW E30

BMW M3 E30

WB 258mm

Width 190mm

Clear Lexan Body

W/3D Print Rear Wing/Front Bumper

Incl: 

E30 Decal Sheet

Window Mask

TC403 1/10 F1 Body, 0.6mm

TC401 1/10 F1 Body

F1 Body

Clear Lexan Body

TS003 1/10 TC-01 Body Set

TC-01 Body Set

For Tamiya TC-01

Clear Lexan Body

TC040 1/10 Ferrari F40, 190mm

Ferrari F40

Width 190mm

WB 258mm

Clear Lexan Body w/Rear Wing

W/3D Print Mirrors, Light Buckle, Light Pod

Incl:

F40 Monte Shell Decal Sheet

Window Mask

TC064 1/10 Toyota Celica GT-4 Rally, 190mm

TC046 1/10 BMW E36

BMW E36

WB 258mm

Width 190mm

Clear Lexan Body 

Incl:

E36 Park N Shop Decal Sheet

Window Mask

TC046 1/10 BMW E36, 190mm

BMW E36

WB 258mm

Width 190mm

Clear Lexan Body 

Incl:

BMW Watson's Decal Sheet

Window Mask

CB400 1/10 Crawler Body, 324mm

Crawler Body

WB 324mm

Width 240mm

Clear Lexan Body

Incl:

Light Decal

Window Mask

T-Work`s ECS Drive Shaft for Xray X4

Cardan drive shafts for the front axle of the Xray X4 touring car.

Content: 2 pieces

Tamiya 46702-S 1/10 RTR Racing Fighter (DT-03)

De TAMIYA X-SA modellen zijn kant en klare auto´s van TAMIYA. Het model werd in de fabriek geassembleerd, inclusief de afgewerkte carrosserie. Het model is uitgerust met de elektronische snelheidsregelaar TEU-105BK en een elektromotor.
Wij bieden de Fighter RTR aan met een Carson X-1 zender. Het model is al volledig ingesteld, zodat u direct met het model kunt rijden.

Over het model:
- Dit is een afgewerkt R/C model in schaal 1/10 Lengte: 400mm, Breedte: 244mm, Hoogte: 134mm.
- Polycarbonaat body en vleugels zijn gespoten en bestickert
- Geribde voorbanden en banden met vierkante spikes achter zorgen voor betrouwbare off-roadprestaties.
- De DT-03 maakt gebruik van een robuust monocoque frame. De lange wielbasis (287 mm) en het grote loopvlak (voor: 221 mm, achter: 208 mm) zorgen voor geweldige prestaties op en naast de weg!
- De voorste draagarmen hebben een sliphoek van 25 graden voor een geweldige terreinvaardigheid.
- Voorzien van een afgedichte achterste versnellingsbak met intern differentieel en stofbestendig. 
- ESC: TEU-105BK
- Motor: Type 540
- Afstandsbediening Carson X-1
- Servo C5

Benodigde accessoires: 7,2V NiMH-accu, lader voor rijaccu

Leveromvang:
- Volledig gemonteerd, klaar om te rijden Racing Fighter met een Carson X-1 zender.

MR33 Bumper & Body Space Setup Sponge 18x13x5mm (3) 18x13x2mm (3)

The self-adhesive MR33 foam strips are extremely important and useful when fitting a body. They are glued into the front of the body to perfectly close the gap that usually exists between the body and the frame. This prevents the body from fluttering or being pushed in at high speeds or in strong winds.

Contents: 3 thick (18x13x5mm) and 3 thin (18x13x2mm) strips.

Ride Body Protect Sponge Pad incl. Adhesive Tape - White

3-channel receiver suitable for CR2S(V2), CR3P and CR4T radio - Waterresistant.
 
Specification:

• 2.4Ghz A.F.H.D.S. system
• 3-channel
• Water-resistant 
• Failsafe function
• Measurement: 35 x 21 x 12mm
• Weight: 10g
• Voltage: 4,8V - 6,6V

FEATURES
    
Description of the channels (the transmitter has 4 channels which are assigned as follows):
CH1: Steering wheel
CH2: Throttle lever (Trigger)
CH3: 3-position toggle switch
CH4: Push button
 
Reverse function (REV): This function can be used to set the direction of rotation of the steering servo/motor.
 
Trimming (TRIM): Adjustment of the straight run and throttle neutral position.
 
Dual Rate function (D/R): The steering angle and also the motor rotation power can be increased or reduced by operating this rotary knobs.
 
Failsafe function: This function determines what the receiver should pass on if the signal to the transmitter is lost (e.g. emergency braking).
 
Beginner modus: This function is intended for newcomers. In this mode the motor power is automatically reduced to 50%.
 
      
 
SPECIFIKATION 
 
Radio CR4S:
Channels: 4
2.4GHz Protocol: ANT
Distance: >150m
Battery (not included): 4*AAA 1.5 - 6V DC
Low V Warning: <4.2V (only NiMH)
Using LiPo TX battery possible: Yes (only LiPos with built-in low V protection)
Charging interface: No
Antenna type: Single antenne
Temperatur range: -10°C - +60°C
Size: 118*73*145 mm
Weight: ca. 130 g
 
Receiver R4WP Micro (2020016):
Channels: 4
Antenna type: external single antenna
Waterproof: Yes
Power: 3.5-8.4V
Failsafe: Yes (in connection with radio)
Temperatur range: -10°C - +60°C
Weight: 5 g
Size: 30.2*18.0*13.0 mm
 
 
SET INCLUDES
 
1* 4-Channel radio "CR4S"
1* 4-Channel receiver
1* Antenna tube
1* Manual (DE/ENG/FR)

4-channel receiver "R4WP" with internal antenna suitable for "CR4S" 2.4Ghz remote controller.
 
This waterproof receiver uses the new AFHDS 2.4GHz ANT frequency technology and has a very compact design with a size of 22.6*20.6*25.5mm. 
 
Specification: 
 
Channels: 4 
2.4GHz Protocol: ANT
Suitable for: CR4S and other remote controllers with ANT technology
Distance: >150m
Antenna type: buildt-in
Waterproof: Yes
Power: 3.5-8.4V
Failsafe: Yes (in combination with remote control)
Temperature range: -10°C - +60°C
Weight: 6g
Dimensions: 22.6*20.6*25.5mm

The Raytronic C30 + 300W was designed to offer an intelligent pocket charger with high performance and very simple operation. RAYTRONIC C30 + allows charging and discharging common types of cells (NiCd, NiMH, LiPo, LiHV Li-ion, LiFe, Pb), in addition it is equipped with a built-in six-channel balancer, which ensures safe and comfortable charging of lithium batteries. Measurement of voltage and internal resistance of individual cells (for lithium batteries) is a matter of course.

Features:

• Input supply voltage 10 - 26 V DC (socket XT60)
• For charging and discharging 1 - 16 NiCd / NiMH cells, 1 - 6 Li-ion / LiPo / LiHV / LiFe cells or 2- 20 V lead-acid batteries
• Adjustable charging current (0.1 A - 12.0 A)
• Adjustable discharge current (0.1 A - 3.0 A)
• Max. power for charging 300 W, for discharging 5 W
• Termination of charging using delta-peak automation for NiCd and NiMH batteries
• Lithium and Pb batteries are charged using the "constant current / constant voltage" method
• Adjustable delta-peak detection sensitivity for NiCd and NiMH batteries
• Adjustable end voltage for charging and discharging for lithium batteries
• Repeated cyclic operation of charging / discharging or discharging / charging for NiCd and NiMH batteries, up to 5 cycles
• Four charging modes for lithium batteries - normal charging, fast charging, balancing charging and storage charging / discharging
• Stop charging when the set time or the supplied charge is exceeded.
• Memory for 5 charging / discharging programs.
• Measurement of the total voltage of the set and individual cells (for lithium batteries)
• Measurement of the total internal resistance of the set and individual cells (for lithium batteries)
• The XT60 power output socket and the JST-XH 2-6S universal balancer socket allow you to connect the rechargeable battery directly without the need for a charging cable and balancer adapter (if the kit is equipped with an XT60 power connector and a JST-XH service connector)
• Two-line backlit LCD display with simple and clear menu and display of parameters during charging / discharging
• A number of warning text messages contribute to safe operation - incorrect input voltage, incorrect connection, unsuitable battery or its condition, incorrect polarity at the output
• Reverse polarity and short circuit protection at the output / li>
• Compact plastic case, small dimensions
• Built-in fan for forced cooling

Specifications:

Ruddog 3200mAh 3.7V MT-44 MT-5 LiPo TX Battery

LRP universal charging lead - Sanwa / Graupner / JR - rx / t

LRP universal charging lead - Futaba rx / tx plug

TRF420 Suspension Arm Bushing A-C (2pcs.)

The brand-new suspension arm design in the TRF420 chassis use aluminum bushing inserts to allow quick, minute adjustment of damper attachment position and leverage ratio (i.e. the angle of the shock damper). This part is the B bushings, which can be used as a Hop-Up Option. Attachment only requires removal of the ball connector and grub screw, saving valuable time during set up changes.

- TRF420 Suspension Arm Bushings B x2
- Blue anodized finish.

Ook passend als toebehoor voor Tamiya TRF420 (42345).
Ook passend als toebehoor voor Tamiya Suspension Upgrade-Set TRF419 (54886).

Tamiya nummer: 54942

EAN: 4950344549429

T-Work's Compact Hard Case Parts Bag

T-Work's Compact Hard Case Parts Bag (M)

T-Work's Compact Hard Case Parts Bag (S)

T-Work's Hard Case Parts Bag (Hard Separator)

Power max servo RGC01L
aluminimum behuizing
water proof
dual ball berings
coreless motor

speed 6v 0.09 sec
speed 7.2v 0.07 sec
torque 6v 15.4kg
torque 7.2v 18kg

The black silicone ring was developed exclusively for oil dampers. The material is Axon's original black silicone rubber to maximize the stability of the suspension. And, in order to achieve both smooth damper movement and overwhelming stability of the machine, we finished it with a unique shape that can not be found anywhere else. By applying Axon core shock grease at the same time, ideal damper performance can be obtained.

(Compatible models: Yokomo cars, Tamiya cars, Kyosho cars, etc.)

The black silicone ring was developed exclusively for oil dampers. The material is Axon's original black silicone rubber to maximize the stability of the suspension. And, in order to achieve both smooth damper movement and overwhelming stability of the machine, we finished it with a unique shape that can not be found anywhere else. By applying Axon core shock grease at the same time, ideal damper performance can be obtained.

(Compatible models: Yokomo cars, Tamiya cars, Kyosho cars, etc.)

The black silicone ring was developed exclusively for oil dampers. The material is Axon's original black silicone rubber to maximize the stability of the suspension. And, in order to achieve both smooth damper movement and overwhelming stability of the machine, we finished it with a unique shape that can not be found anywhere else. By applying Axon core shock grease at the same time, ideal damper performance can be obtained.

(Compatible models: Yokomo cars, Tamiya cars, Kyosho cars, etc.)

Ruddog Products' latest addition to their ever-increasing range of universal tools are the soft-grip straight scissors. With an overall length of 17 cm, the straight scissors fit inside every toolbox. Its 7.5 cm blades with black titanium nitride coating cut tough plastics just as easily as soft foam inserts or thin decals. The soft grip handles ensure safe and comfortable use.

mars Dual Battery Charger supports 2 channel charging and discharging: DC port power supply supports maximum single port 300W charging, and AC power supply supports intelligent distribution of total power.

The power rate is 200W (2 channels), the maximum charging current is 15A, the charging current is adjustable, and the use and operation are simple; 7 operating modes of the products include charge, discharge, balance, storage, ExtDischarge, SyncCharging, digital power supply;

During the charging process of the product, the current task total voltage, charging/discharging current, working time and other information can be displayed in real time through the display window;

It can also query real-time single-cell voltage information, internal resistance, and temperature, which is convenient for users to understand battery performance and charging status;

The heat dissipation design can effectively ensure the continuous stable and reliable operation of the product.

Features:

• Dual Channel AC/DC Smart Balance Charger - Europe Version.
• Small & Lightweight Portable Design with wide-view IPS Display.
• High power charging, capable of Max15 amp charge rates for one channel, worldwide 100V-240V voltage versatility, AC 200 Watts, DC 600 Watts.
• External discharge function.
• Synchronous output, 2-in-1 Fast-charging.
• Built-in DC power source for different devices.
• Controlled heat dissipation system.
• Temperature compensation function.
• Advanced safety features, UL94-V0 Flame Retardant Grade.
• Protection of Short circuit / Overcurrent / Overcharge / Overvoltage

Specifications:

Xray Blue Sweater (Xxl)

LRP LiPo Safe Charging Bag, 23 x 30 cm

LRP universal charging lead - BEC plug

42143, TRF 4mm/M4 Alu Serrated Whell Nut blue (4)

TRF420 D Parts Suspension Arms

These are spare suspension arm parts for the TRF420 racing chassis kit.

- TRF420 D Parts x2
- Components are molded in carbon fiber-reinforced plastic for superior rigidity.
- The tweaked design uses aluminum inserts for damper attachment. Using different inserts (sold separately) allows adjustment of lever ratio, with three different setups possible.
- Rear arms are 3mm offset to the rear, allowing the shorter TRF420 lower deck (while keeping the same wheelbase) and giving increased rear traction.
- For use with 3mm diameter shafts (sold in Item 51637).
- Compatible with TRF420, TRF419*, TA07* and TB-05 PRO* chassis cars.
- Note: *Rear arms have different offset to kit standard parts, and require adjustment of wheelbase using spacers, etc.

Tamiya number: 51639
 

RC TRF420 E Parts

These are spare rear upright parts for the TRF420 racing car chassis.

- TRF420 E Parts x1
- Components are molded in carbon fiber-reinforced plastic for superior rigidity.
- Bearing positions are precisely aligned for maximum efficiency.
- For use with 3mm diameter shafts (sold in Item 51637).
- Compatible with cars using Item 51639 TRF420 D Parts (Suspension Arms).

Passend voor volgende Tamiya modellen:
- TRF419 (42285)
- TRF419X (42301)
- TRF419XR (42316)
- TRF420 (42345)
- TA-07 Pro (58636)
- TB-05 Pro (58658)
Ook passend als reserveonderdeel voor de Tamiya Suspension Upgrade-Set TRF419 (T54886).


Tamiya nummer: 51640
EAN: 4950344516407

omposition Kit

• Glow plug wrench (8/9/10/12/17mm)
• Filling bottle
• Glow starter with NiMh 2000 mAh battery
• Two screw drivers
• Hex wrench with 4 sizes (4mm, 4.5mm, 5mm, 5.5mm)

Mon-Tech - Foam Bumper strips

Italeri 50826 Masking tape roll 3mm x18m (2)

Professionele accessoires - ITALERI gereedschap en een uitgebreid gamma penselen maken het bouwen en ontwerpen van modelbouwpakketten van allerlei aard gemakkelijker dankzij hun hoge kwaliteit. Of het nu gaat om ronde penselen, platte penselen, extra dunne puntige penselen of precieze hulpjes zoals zijkniptangen, vijlen en pincetten, ITALERI accessoires maken modelbouw leuk.

Afmetingen (verpakking): 0,7 x 9 x 15,5 cm
Gewicht incl. verpakking: 15,4 g

Italeri Nummer: 50826
EAN: 8001283508261

1/10 R/C Alpine A110 Jägermeister

Artikel-Nr.: 58708
EAN: 4950344066360

Tamiya is proud to add a new version of the Alpine A110 with an orange Jägermeister livery to our M-06 chassis
series. The Alpine A110 was a French compact coupe featuring a lightweight FRP body based upon a steel
backbone, rear-wheel drive chassis with the rear-mounted inline-4 engine positioned longitudinally. Production
continued from its debut year 1963 until 1977, and the A110 attained fame after victory in the 1971 rally in
Monte Carlo. In 1973, this car become the first World Rally champion and its Jägermeister orange livery version
achieved a class victory in German circuit races.

About the Model:
- This is a 1/10 scale R/C model assembly kit. Length: 395mm, width: 168mm, height: 121mm. Wheelbase: 210mm.
- The lightweight, durable 1.0mm thick polycarbonate body realistically captures the distinctive 2-door coupe form in style.
- Separate parts authentically depict headlights, front/rear bumpers and side mirrors.
- The model is based upon the rear-wheel drive M-06 chassis (210mm wheelbase setup) featuring a rearmounted motor.
- Dish wheels molded in silver are paired with 60D radial tires (Item 50683) at front and 60D super radial tires (Item 54999) at rear.
- Stickers are included to recreate sponsor logos, race numbers and more. Masking stickers will aid in the paint job.
- A wealth of Hop-Up Option parts is available to tune the M-06 chassis to your needs.
- Please note that body is pre-painted only for domestic models.

Motor Type 540

MR33 Bearing Cleaner

MR33 bearing cleaner for easy cleaning and maintenance for the ball bearings of your RC car.

Diameter: 35mm

Height: 70mm

Xtreme MACH1 1:10 Touring Car Clear Body - 0.5mm

Mach1 - fasten your seatbelts for the next stage of body shell development from Xtreme Aerodynamics.

The team around Cristian Boni once again created a great new body shell, which will impress you with a great performance and fast laptimes. 
The main features of the Mach1 are the new front hood with a significant look arount the grill and the headlights. 
New designed are also the wheel cases of the Mach1.
They will now ensure a better air flow, all the way from the front hood over the roof and along the sides of the body to the rear wing.
The whole aerodynamic efficiency of the Mach1 is an improvement over the previous bodies.
As a result the Mach1 provides more cornerspeed, a better air flow, more efficiency, and more overall downforce!

NOTE:
This body shell (0,5mm Version) is listed on the official ETS Body Shell List for Season #15 2022/23. It is allowed in the following racing classes:
ETS Pro Stock & ETS Modified

Available Versions:

MX-MTB0421-ETS  Xtreme MACH1 1:10 Touring Car Clear Body - 0,7mm

MX-MTB0421-L  Xtreme MACH1 1:10 Touring Car Clear Body - 0,5mm Lightweight

Xtreme MACH1 1:10 Touring Car Clear Body - 0,7mm

Mach1 - fasten your seatbelts for the next stage of body shell development from Xtreme Aerodynamics.

The team around Cristian Boni once again created a great new body shell, which will impress you with a great performance and fast laptimes. 
The main features of the Mach1 are the new front hood with a significant look arount the grill and the headlights. 
New designed are also the wheel cases of the Mach1.
They will now ensure a better air flow, all the way from the front hood over the roof and along the sides of the body to the rear wing.
The whole aerodynamic efficiency of the Mach1 is an improvement over the previous bodies.
As a result the Mach1 provides more cornerspeed, a better air flow, more efficiency, and more overall downforce!

NOTE:
This body shell (0,7mm Version) is listed on the official ETS Body Shell List for Season #15 2022/23. It is allowed in the following racing classes:
ETS Pro Stock & ETS Modified

Available Versions:

MX-MTB0421-ETS  Xtreme MACH1 1:10 Touring Car Clear Body - 0,7mm

MX-MTB0421-L  Xtreme MACH1 1:10 Touring Car Clear Body - 0,5mm Lightweight

Dit is een lichtgewicht versie van de carrosserie- en Spoileronderdelen van item 58353. Gemaakt van 0,8 mm polycarbonaat in tegenstelling tot de standaard 1,0 mm, geeft het een lager zwaartepunt en verbetert het de prestaties van het model. Het product bevat geen stickers, maskerende stickers of instructies, waardoor het ideaal is voor racers die hun eigen kleurstelling toepassen.

Over het artikel

• De pittige vorm van de NSX 2005 is nagebouwd in Polycarbonaat met een dikte van 0,8 mm.
• Markeringsstickers, dekoreerstickers en instructies zijn niet inbegrepen.
• Compatibel met 257 mm wielbasis R / C touringcar chassis.

Tamiya nummer: 47353