CORE RC Hi Response TC Spring Set - Soft

CORE RC Hi Response TC Spring Set - Soft

CORE RC Hi Response springs for 1/10th Touring and FWD cars.

Developed by Schumacher engineers and high level drivers, these new springs bring a new dimension to 1/10th Touring.

These springs have been designed to improve responsiveness of the cars compared to the competition.

Featuring less coils and having a thinner wire diameter they offer over a 40% weight saving over the competition, a significant 5.2g per set of 4.

CORE RC provide a wide linear range from 1.9 N/mm to 3.5 N/mm and also a progressive spring measuring 2.2-2.9

19mm in length.

Three easy to buy, pairs of 4 are available as sets;

CR852 Soft; including 1 pair of 1.9, 2.1, 2.3 and 2.2-2.9 progressive.
CR853 Medium; including 1 pair of 2.5, 2.6, 2.7 and 2.8
CR854 Hard; including 1 pair or 2.9, 3.1, 3.3 and 3.5

CORE RC MOLYBDENUM THRUST RACE GREASE - 10ML

CORE RC MOLYBDENUM THRUST RACE GREASE - 10ML

CORE RC MULTI PURPOSE LITHIUM GREASE - 10ML

Extensively tested by our engineering department and factory race team to have you covered for all applications. Supplied in larger than normal 10ml pots which provides great value too. Distinctive CORE RC branding keeping your pit area on point. A general purpose lower cost lithium grease, suitable

CORE RC PUNT TANG

- Needle nose/long nose pliers for fine action and with a small cutting area. - Spring loaded. - Comfortable grip.

CORE RC Ride Height Gauge 3-7.5mm in 0.1mm Steps

CORE RC Ride Height Gauge 3-7.5mm in 0.1mm Steps

From CORE RC is this awesome On Road Ride Height Gauge.

The new CORE RC ride height gauge is precision machined with black anodized aluminium with silver chamfered edges.

Ride height can be adjusted from 3.0mm to 7.5mm in 0.1mm steps.

The gauge is relatively wide allowing stable setting with bright white easy to read etching, especially good in darker rooms and pit tents! 

CORE RC Servo Saver Assembly 25T - Atom

CORE RC Servo Saver Assembly 25T - Atom

CORE RC SIDE CUTTER

- Side cutters or also known as wire cutters or diagonal cutters. - For cutting wire or trimming plastic. - Spring loaded. - Comfortable grip.

CRAGG KWF INSERT 2WD FRONT - PR SCHUMACHER

CRAGG KWF INSERT 2WD FRONT - PR

DE BINNEN BAND VOOR HET EK 2023
The World Championship Winning brand....Cragg Racing. A name well known in Off Road circles these products have been developed by Mick Cragg and used by Neil with great success.

The inserts are slightly softer than Schumacher mediums but slightly larger. Therefore they fill the tyre more, giving different support, enabling you to tune to different track conditions.

CRAGG KWF INSERTS 1/10TH 4WD FRONT PR SCHUMACHER

CRAGG KWF INSERTS 1/10TH 4WD FRONT PR

DE BINNEN BAND VOOR HET EK 2023
The World Championship Winning brand....Cragg Racing. A name well known in Off Road circles these products have been developed by Mick Cragg and used by Neil with great success.

The inserts are slightly softer than Schumacher mediums but slightly larger. Therefore they fill the tyre more, giving different support, enabling you to tune to different track conditions.

CRAGG KWF INSERTS 1/10TH REAR PR SCHUMACHER

CRAGG KWF INSERTS 1/10TH REAR PR

DE BINNEN BAND VOOR HET EK 2023
The World Championship Winning brand....Cragg Racing.
 

A name well known in Off Road circles these products have been developed by Mick Cragg and used by Neil with great success.

The inserts are slightly softer than Schumacher mediums but slightly larger. Therefore they fill the tyre more, giving different support, enabling you to tune to different track conditions.

Decals - FT8 SCHUMACHER

Decals - FT8 SCHUMACHER

DIFF CROSS PIN - LD/2,L1 EVO,ST,FT SCHUMACHER

DIFF CROSS PIN - LD/2,L1 EVO,ST,FT

DIFF MOUNTS - MISSION FT (SET)SCHUMACHER

DIFF MOUNTS - MISSION FT (SET)

Diff Output (pr) - Neon SCHUMACHER

Diff Output (pr) - Neon SCHUMACHER

Diff Rebuild Kit - E1-E5,A2/3,Icon/2 SCHUMACHER

Diff Rebuild Kit - E1-E5,A2/3,Icon/2

Diff Spacer Set - A2/3,E4/5,Icon/2 SCHUMACHER

Diff Spacer Set - A2/3,E4/5,Icon/2 SCHUMACHER
Diff spacers for pan cars.

Includes;

1 x 2.0mm
3 x 0.5mm

Double Joint Driveshaft V2 pr - Mi7,FT,Mi8,FT8 SCHUMACHER

Double-Joint-Driveshaft-V2-pr-Mi7,FT,Mi8,FT8-SCHUMACHER

Dowel Bush (For 1.6mm Top Decks) - Mi9 (pk3)

Dowel Bush (For 1.6mm Top Decks) - Mi9 (pk3)

Driveshaft Blade - Mi7,Mi8,FT8 (pk4)SCHUMACHER

Driveshaft Blade - Mi7,Mi8,FT8 (pk4)SCHUMACHER

DROOP SPACER (PK 10) - ECLIPSE 5

DROOP SPACER (PK 10) - ECLIPSE 5