Er zijn nog geen producten in uw winkelwagen geplaatst.
Absima
5 / 11
Bezig met laden...
ABSIMA Hex locknut 17mm silver (4)
€ 7,95
Hex locknut 17mm silver (4)
√ 1/8 scale – 17mm
√ Thread pitch: 1.0
√ Material: Aluminum
√ 4 pcs./set
ABSIMA High speed Twin Fan + holder plate, 15,000rpm, 30mm size
€ 16,95
Functies:
- 2 ventilatoren voor koellichaam
- 15.000 tpm
- BEC-connector
- Afmeting (LxBxH) ca. 30 x 30 x 10mm
- Boorgat afstand 25 mm
- Met aluminium montageplaat: 60 x 30 x 3mm
Absima LiPo 7.4V-25C 5000 Hardcase (TAM-Plug)
€ 34,95
This Absima LiPo battery is the perfect choice for "brushed" RC cars. The perfect C-rate and the low weight ensure maximum driving pleasure!
Features:
- Plug system: Tamiya
- Minimum capacity: 5000 mAh
- Voltage: 7.4 Volt
- C-rate: 25 C
- Watt hours: 37Wh
- Balancer plug system: XH
- Battery box design: Hardcase
- Measures (LxWxH) 138 x 46 x 25 mm
- Weight: 255 g
ABSIMA LiPo 7.4V-30C 4200 Hardcase (TAM) - 4140004
€ 34,95
Battery type: LiPo
Hard Case
Capacity: 4200mAh
C-rate: 30C
Plug system: Tamiya
Balancer plug system: XH
Voltage: 7.4V
Dimension: 137x46x24mm
Weight: 219g
ABSIMA Lower Suspension Arm (2) Buggy/Truggy 1:10
€ 15,95
Lower Suspension Arm (2) Buggy/Truggy 1:10
ABSIMA Metal Top Heatsink with fan for 1:8 up to ø40mm , black
€ 18,95
Features:
- Heat sink for 1:8 elektric motors
- 12 cooling fins ? Material: Aluminum
- Clamp mounting Ø: 38 mm
- Measure (LxWxH): 47 x 40 x 28mm
- Fan with 8.000RPM
- Measure fan: 40 x 40 x 15mm
- BEC plug
ABSIMA Metalen Top Heatsink voor 1:8 maat 41-43mm
€ 12,95
Metalen Top Heatsink voor 1:8 maat 41-43mm
ABSIMA Metalen zijkoellichaam voor 1:10, zwart
€ 6,95
Metalen zijkoellichaam voor 1:10, zwart
Functies:
- Koellichaam voor 1:10 elektrische motoren
- Geschikt voor motoren van 540 en 550
- Materiaal: Aluminium
- Klemmontage Ø: 36 mm
- Zijmontagebeugel voor extra ventilator van 30 mm (boorgatafstand: 25 mm)
- 24 koelribben
- Afmetingen (LxBxH): 45 x 29 x 30mm
ABSIMA Power Tank Lipo 11.1V-60C 6200mAh HC (XT90-Plug)
€ 67,50
PERFECT FOR BASHER CARS WITH 60C AND A TOP INNER RESISTANCE !
POWER TANK - Absima LiPo-Series
Description: If you are a hobby driver or a basher, these are the batteries you should have no second thoughts about buying.
This batteries fill the gap between entry level and competition line and are perfect for all 1/10 & especially 1/8 brushless cars. If you need extra power for club racing or bashing, this batteries are perfect! You will get a LiPo with 60C and a fantastic inner resistance for an amazing price.
Features:
- Plug system: XT90 plug (Amass)
- Minimum capacity: 6200 mAh
- Voltage: 11.1 Volt
- C-rate: 60 C
- Watt hours: 68.82Wh
- Balancer plug system: XH
- Battery box design: Hardcase
- Measures (LxWxH) 138 x 46 x 35 mm
- Weight: 480 g
What means C-rate?
The C-rate indicates the maximum discharge/load of a LiPo battery. To do this, the C-rate is multiplied by the nominal capacity. The result is the maximum current in amperes.
Example: 4.0Ah (4000mAh) * 60C = 240 A
It should be noted, however, that different resistances (connectors, cables and especially the internal resistance) influence the current output, so that these values can never be reached. Our goal is to keep the internal resistances as low as possible in order to achieve maximum performance.
Example: 4.0Ah (4000mAh) * 60C = 240 A
It should be noted, however, that different resistances (connectors, cables and especially the internal resistance) influence the current output, so that these values can never be reached. Our goal is to keep the internal resistances as low as possible in order to achieve maximum performance.
Absima presents new „lightweight" 12mm aluminum 7075 T6 wheel hubs.5-0.75 4.25MM
€ 11,00
Absima presents new „lightweight" 12mm aluminum 7075 T6 wheel hubs.
5-0.75 4.25MM
Available in different width, to change the track.
The gun-metal anodized offset wheel hubs are available from -0.75mm up to +3.00mm.
Scope of delivery:
● 2pcs. wheel adapter
● Absima sticker sheet
5-0.75 4.25MM
Available in different width, to change the track.
The gun-metal anodized offset wheel hubs are available from -0.75mm up to +3.00mm.
Scope of delivery:
● 2pcs. wheel adapter
Absima presents new „lightweight" 12mm aluminum 7075 T6 wheel hubs.5+1.75 6.75
€ 11,00
Absima presents new „lightweight" 12mm aluminum 7075 T6 wheel hubs.
5+1.75 6.75MM
Available in different width, to change the track.
The gun-metal anodized offset wheel hubs are available from -0.75mm up to +3.00mm.
Scope of delivery:
● 2pcs. wheel adapter
● Absima sticker sheet5+1.75 6.75MM
Available in different width, to change the track.
The gun-metal anodized offset wheel hubs are available from -0.75mm up to +3.00mm.
Scope of delivery:
● 2pcs. wheel adapter
Absima presents new „lightweight" 12mm aluminum 7075 T6 wheel hubs.5+2.25 7.25MM
€ 11,00
Absima presents new „lightweight" 12mm aluminum 7075 T6 wheel hubs.
5+2.25 7.25MM
Available in different width, to change the track.
The gun-metal anodized offset wheel hubs are available from -0.75mm up to +3.00mm.
Scope of delivery:
● 2pcs. wheel adapter
● Absima sticker sheet5+2.25 7.25MM
Available in different width, to change the track.
The gun-metal anodized offset wheel hubs are available from -0.75mm up to +3.00mm.
Scope of delivery:
● 2pcs. wheel adapter
Absima presents new „lightweight" 12mm aluminum 7075 T6 wheel hubs.5+3MM 8MM
€ 11,00
Absima presents new „lightweight" 12mm aluminum 7075 T6 wheel hubs.
Available in different width, to change the track.
The gun-metal anodized offset wheel hubs are available from -0.75mm up to +3.00mm.
Scope of delivery:
● 2pcs. wheel adapter
● Absima sticker sheet
Available in different width, to change the track.
The gun-metal anodized offset wheel hubs are available from -0.75mm up to +3.00mm.
Scope of delivery:
● 2pcs. wheel adapter
Absima presents new „lightweight" 12mm aluminum 7075 T6 wheel hubs.
Available in different width, to change the track.
The gun-metal anodized offset wheel hubs are available from -0.75mm up to +3.00mm.
Scope of delivery:
● 2pcs. wheel adapter
● Absima sticker sheetAvailable in different width, to change the track.
The gun-metal anodized offset wheel hubs are available from -0.75mm up to +3.00mm.
Scope of delivery:
● 2pcs. wheel adapter
Absima presents new „lightweight" 12mm aluminum 7075 T6 wheel hubs.5MM
€ 11,00
Absima presents new „lightweight" 12mm aluminum 7075 T6 wheel hubs.
Available in different width, to change the track.
The gun-metal anodized offset wheel hubs are available from -0.75mm up to +3.00mm.
Scope of delivery:
● 2pcs. wheel adapter
● Absima sticker sheetAvailable in different width, to change the track.
The gun-metal anodized offset wheel hubs are available from -0.75mm up to +3.00mm.
Scope of delivery:
● 2pcs. wheel adapter
ABSIMA Roundhead Screw set
€ 15,95
Features: All common roundhead screws you need for a 1/8 & 1/10 scale car.
Contains:
- 10 x Roundhead screw M3*5
- 10 x Roundhead screw M3*6
- 10 x Roundhead screw M3*8
- 10 x Roundhead screw M3*10
- 10 x Roundhead screw M3*12
- 10 x Roundhead screw M3*16
- 10 x Roundhead screw M3*20
- 10 x Roundhead screw M4*10
- 10 x Roundhead screw M4*14
- 10 x Roundhead screw M4*16