Er zijn nog geen producten in uw winkelwagen geplaatst.
XRAY T4 2019 Opties
Bezig met laden...
XRAY Narrow Pinion Gear Alu Hard Coated 44T / 64 - 305994
XRAY Narrow Pinion Gear Alu Hard Coated 44T / 64 - 305994
XRAY Narrow Pinion Gear Alu Hard Coated 48T / 64 - 305998
XRAY Narrow Pinion Gear Alu Hard Coated 48T / 64 - 305998
XRAY T4 GRAPHITE BATTERY STRAP FOR LiPo - SET - 306165
XRAY T4 GRAPHITE BATTERY STRAP FOR LiPo - SET - 306165
XRAY T4 GRAPHITE ADJUSTABLE BATTERY HOLDER - 306188
XRAY T4 GRAPHITE ADJUSTABLE BATTERY HOLDER - 306188
XRAY GRAPHITE BATTERY ADJ. WIDTH PLATE (2) - 306190
XRAY GRAPHITE BATTERY ADJ. WIDTH PLATE (2) - 306190
T4 Graphite + Alu Fully Adjustable Battery Holder - 306191
T4 Graphite + Alu Fully Adjustable Battery Holder - 306191
XRAY ALU ADJUSTABLE BATTERY HOLDER (2) - 306192-O
XRAY ALU ADJUSTABLE BATTERY HOLDER (2) - 306192-O
XRAY ALU ADJUSTABLE BATTERY HOLDER NUT (2) - 306193-O
XRAY ALU ADJUSTABLE BATTERY HOLDER NUT (2) - 306193-O
XRAY T4 Graphite + Brass Fully Adjustable Battery Holder - 306194
XRAY T4 Graphite + Brass Fully Adjustable Battery Holder - 306194
XRAY ALU FULLY ADJ. BATTERY HOLDER + WEIGHT FOR SHORTY BATTERIES - 306195
Fully adjustable battery aluminum holder & brass weights for short pack batteries. Allows to move the batteries front and rear but also left to right for easy and comfortable weight transfer adjustment. The holder allows to move the battery which changes the Front/Rear weight balance by 4mm. Design of the battery holder eliminates any negative chassis flex.
Each of the weights (2) is 40g heavy and allows to mount the shorty battery into the center of the chassis for perfect distribution of the weight.
Using the shorty battery with the low profile weights allows to lower the weight of the car which helps to make the car easier to drive, more stable in the chicanes but in the same time improves the rotation of the car.
Recommended to use especially for modified class on carpet or small asphalt tracks.
The weights are CNC-machined from brass material and additionally black coated for astonishing look.
XRAY T4'19 GRAPHITE + ALU FULLY ADJUSTABLE BATTERY HOLDER - 306196
Fully adjustable aluminum battery holder allows to move the batteries in all directions - front/rear and also left/right. The adjustable battery holder allows for easy and comfortable weight transfer adjustment. The front/rear weight balance can be adjusted in 4mm range.
The battery holders allow to mount the battery tape over the top of the battery only without the instalment of the tape under the chassis which allows increased flex of the chassis and as such helps to generate more traction. Thanks to the chassis-free instalment of the tape the ride height of the car can be slightly decreased as there is no more tape under the chassis.
The adjustable holder and the battery backstops are CNC-machined from lightweight aluminum and the battery holders are machined from premium lightweight graphite material.
XRAY T4'19 GRAPHITE + BRASS FULLY ADJUSTABLE BATTERY HOLDER - 306198
Fully adjustable brass battery holder allows to move the batteries in all directions - front/rear and also left/right. The adjustable battery holder allows for easy and comfortable weight transfer adjustment. The front/rear weight balance can be adjusted in 4mm range. The brass material adds extra 7.5g weight for additional weight balance adjustment of the battery side of the car.
The battery holders allow to mount the battery tape over the top of the battery only without the instalment of the tape under the chassis which allows increased flex of the chassis and as such helps to generate more traction. Thanks to the chassis-free instalment of the tape the ride height of the car can be slightly decreased as there is no more tape under the chassis.
The adjustable holder and the battery backstops are CNC-machined from brass material and the battery holders are machined from premium lightweight graphite material.
Xray GRAPHITE HOLDER FOR ADJ. BATTERY HOLDER FOR SLIM BATTERIES (2) - 306199
CNC-machined battery backstop for the adjustable battery holder for positioning batteries fore-aft/left-right. Designed for the slim battery pack. Quick & easy weight transfer adjustment. Made from 3.0mm premium-grade graphite material.
XRAY T4 ALU TOP DECK MOUNT - ORANGE - 306516-O
XRAY T4 ALU TOP DECK MOUNT - ORANGE - 306516-O
XRAY ULP Alu Progressive Shock System - Set (2) - 308029
XRAY ULP Alu Progressive Shock System - Set (2) - 308029
XRAY ALU XRAY SHOCK SPRING RETAINING COLLAR (4) - 308031
XRAY ALU XRAY SHOCK SPRING RETAINING COLLAR (4) - 308031
XRAY ALU XRAY SHOCK SPRING RETAINING COLLAR - BLACK (4) - 308031-K
XRAY ALU XRAY SHOCK SPRING RETAINING COLLAR - BLACK (4) - 308031-K
XRAY ALU XRAY SHOCK SPRING RETAINING COLLAR - ORANGE (4) - 308031-O
XRAY ALU XRAY SHOCK SPRING RETAINING COLLAR - ORANGE (4) - 308031-O
XRAY COMPOSITE PROGRESSIVE PISTONS (4) - 308038
XRAY COMPOSITE PROGRESSIVE PISTONS (4) - 308038
XRAY ALU PROGRESSIVE SHOCK INSERT -- SET (2) - 308039
XRAY ALU PROGRESSIVE SHOCK INSERT -- SET (2) - 308039
XRAY 4S SPRING-SET PROGRESSIVE C = 2.3-2.6 (2) - 308263
XRAY 4S SPRING-SET PROGRESSIVE C = 2.3-2.6 (2) - 308263
XRAY 4S SPRING-SET PROGRESSIVE C = 2.5-2.8 (2) - 308264
XRAY 4S SPRING-SET PROGRESSIVE C = 2.5-2.8 (2) - 308264
XRAY T4 ALU SHOCK ABSORBER-SET - BLACK (2) - 308307-K
XRAY T4 ALU SHOCK ABSORBER-SET - BLACK (2) - 308307-K
XRAY T4 ALU SHOCK ABSORBER-SET - ORANGE (2) - 308307-O
XRAY T4 ALU SHOCK ABSORBER-SET - ORANGE (2) - 308307-O
XRAY ULP ALU SHOCK ABSORBER-SET - BLACK (2) - 308308-K
XRAY ULP ALU SHOCK ABSORBER-SET - BLACK (2) - 308308-K
Xray ALU CAP FOR XRAY SHOCK BODY #308322 - BLACK (2) - 308327-K
Xray ALU CAP FOR XRAY SHOCK BODY #308322 - BLACK (2)
Xray ALU SHOCK CAP-NUT WITH VENT HOLE - BLACK (2) - 308352-K
Xray ALU SHOCK CAP-NUT WITH VENT HOLE - BLACK (2)
XRAY PURE TUNGSTEN CENTER CHASSIS WEIGHT 30g - 309856
Machined 30g pure tungsten chassis weight. The weights are smaller than the brass weights and are easier to install with a cleaner layout. The super small weights result in lower CG comparing to standard weights.
Produced from very rare and heavy pure tungsten material, not a typical tungsten mixture. The pure tungsten has the highest density structure and is the heaviest metal material which allows to design smallest size weights comparing to any other materials.
Quick & easy attachment to chassis. Marked with weight value for easy identification.
Xray STAINLESS STEEL WEIGHT FOR SLIM BATTERY PACK 35G - 309862
Specially-designed 35g stainless steel weight for placement under slim battery pack to add weight as low as possible. Helps to improve the balance of the car and makes the car easier to drive. Dimensions: 135x33x1mm. Fits standard 1/10 on-road cars. A “must have” option part.
XRAY Composite Rear Body Back Stop (2) - 331340
Composite body back stop set for 1/10 touring cars (electric or nitro), made from lightweight composite material, provides support for the rear of body shell to prevent tucking under the rear wheels due to a collision from the rear, thus reducing lost racing time and increasing body lifespan. Posts are quickly & easily mounted, and are trimmmable for perfect fitment. Set of two, includes mounting hardware.
Tamiya TRF Wiel nut 4mm Serrated (8) Black - 42282
Tamiya TRF Wiel nut 4mm Serrated (8) Black
TAMIYA RC 5mm Shim Set - 3 Types - 53587
RC 5mm Shim Set - 3 Types
These shim sets may be used to reduce suspension or wheel axle slop in any of Tamiya's on or off-road vehicles. Perfect for super fine tuning your race vehicle build.
Afmetingen:
- 5mm inner
- 7mm outer
- 10 pcs 0,1 mm
- 10 pcs 0,2 mm
- 10 pcs 0.3mm
Hiro Seiko M3x5 Titanium Hex Socket Button Head Screw (5) - 69678
Hiro Seiko M3x5 Titanium Hex Socket Button Head Screw (5) - 69678