SCHUMACHER-C/F-Camber-Strap-6mm-Width-1.5deg-Icon

Corvette GT2 Finished Body Yellow (Printed)

Alfa Romeo TZ3 Corsa Body Shell Red (Printed)

Product information "Rockamp Body Reamer 0-14mm"

Solidly processed Lexan drill for work in the 0-14mm range.

Technical Specifications

Schumacher’s world championship winning engineering team have applied their knowledge and experience to create the NEON MTC Mini Touring Car. The NEON is already a proven winner at British BRCA National races. It features class leading suspension geometry, and transmission efficiency, to make a well balanced car that is easy to drive fast. The NEON will bring out the best in your driving skills, to move you up the rankings in this fun and competitive racing class.

Dealer Pre-Orders Being Taken - Due Mid October



 

• New – Double wishbone suspension design. Refined over countless hours by our team drivers and in-house development engineers to provide maximum performance across all track conditions.
• New – Upper and Lower wishbones. Lightweight and stiff.
• New – Fixed length upper wishbones. Pre-defined camber and castor for less maintenance and performance straight from the box.
• New – Lightweight front spool assembly with replaceable lightweight outputs.
• New – Proven gear differential with steel outputs. Reliability assured.
• New – Moulded transmission housing. Lightweight and robust.
• New – Double Joint Front Driveshaft. Utilising our proven joint design for great durability.
• New – Rear Driveshaft. Ultra hard wearing Steel.
• New – Short shocks. Featuring Alloy bodies, machined pistons, low friction shafts, and lightweight moulded upper socket.
• New – Steering Arms for optimal Ackermann setting.
• New – Layshaft assembly. Lightweight and durable.
• New – Lightweight motor mount design with optional top deck stiffener screw.
• New – Lightweight moulded wheel hexes.
• New – Floating Servo Mount. Low centre of gravity design that does not impact on chassis flex.
• New – Lower shock mount. Simple and lightweight.
• New – Twist free front and rear shock mount designs.
• New – Diff/Spool eccentrics for easy belt tension adjustment, with the ability to change the diff/spool height.
• New – Vertical or rear facing body posts to suit user preference for bodyshell mounting.
• New – Adjustable battery mounting in front-rear and left-right directions. Balance the car to suit any condition.
• New – High quality Bando 105T belts. Flexible, efficient and durable drivetrain.

• Hub carrier design provides precise wheel control and performance.
• Optional Anti-roll bars.
• Rear track rods for infinite adjustment of rear toe-in. This can be tuned for the use of passive rear steering / toe-in change.
• Arrowmax 48dp 81T Spur Gear included in the kit.
• Fully ball-raced transmission.

• Body pictured is Bittydesign Hyper-M

NEON MTC - S2 - Kit SCHUMACHER
Schumacher’s world championship winning engineering team have applied their knowledge and experience to create the NEON MTC Mini Touring Car. The NEON is already a proven winner at British BRCA National races. It features class leading suspension geometry, and transmission efficiency, to make a well balanced car that is easy to drive fast. The NEON will bring out the best in your driving skills, to move you up the rankings in this fun and competitive racing class.

Dealer Pre-Orders Being Taken - Due Mid October

• New – Double wishbone suspension design. Refined over countless hours by our team drivers and in-house development engineers to provide maximum performance across all track conditions.
• New – Upper and Lower wishbones. Lightweight and stiff.
• New – Fixed length upper wishbones. Pre-defined camber and castor for less maintenance and performance straight from the box.
• New – Lightweight front spool assembly with replaceable lightweight outputs.
• New – Proven gear differential with steel outputs. Reliability assured.
• New – Moulded transmission housing. Lightweight and robust.
• New – Double Joint Front Driveshaft. Utilising our proven joint design for great durability.
• New – Rear Driveshaft. Ultra hard wearing Steel.
• New – Short shocks. Featuring Alloy bodies, machined pistons, low friction shafts, and lightweight moulded upper socket.
• New – Steering Arms for optimal Ackermann setting.
• New – Layshaft assembly. Lightweight and durable.
• New – Lightweight motor mount design with optional top deck stiffener screw.
• New – Lightweight moulded wheel hexes.
• New – Floating Servo Mount. Low centre of gravity design that does not impact on chassis flex.
• New – Lower shock mount. Simple and lightweight.
• New – Twist free front and rear shock mount designs.
• New – Diff/Spool eccentrics for easy belt tension adjustment, with the ability to change the diff/spool height.
• New – Vertical or rear facing body posts to suit user preference for bodyshell mounting.
• New – Adjustable battery mounting in front-rear and left-right directions. Balance the car to suit any condition.
• New – High quality Bando 105T belts. Flexible, efficient and durable drivetrain.

• Hub carrier design provides precise wheel control and performance.
• Optional Anti-roll bars.
• Rear track rods for infinite adjustment of rear toe-in. This can be tuned for the use of passive rear steering / toe-in change.
• Arrowmax 48dp 81T Spur Gear included in the kit.
• Fully ball-raced transmission.

• Body pictured is Bittydesign Hyper-M

1/10 Alloy shock absorber 62mm (4 carson

HUDY ALU ADJUSTABLE SERVO SAVER 1/12 - SET

TAMIYA-Opel-Kadett-GT/E-(Gelakte-Carrosserie)-(MB-01)47499

Deze Kadett wordt geleverd met een geverfde body

Hier is nog een RC-kit met het MB-01-chassis - dit keer met een lange wielbasis en midden-achter/achterwielaandrijving (MR).
Aandrijving (MR). De Opel Kadett GT/E, die in 1975 op de markt kwam, was een high-spec versie van
de Opel Kadett, een auto die in de jaren 1970 grote populariteit genoot in Europa. De GT/E had een tweedeurs coupécarrosserie, een krachtige 1,9-liter motor
en een versterkte ophanging; Het fabrieksteam van de Opel Eurodealer, satellietteams en privérijders namen deel aan rallyraces met
aangepaste versies van dit voertuig en behaalden in 1976 de tweede plaats in het constructeurskampioenschap
in de wereldwijde rallyraces.

Over het model
- Dit is een 1/10 schaal R / C modelbouw. Lengte: 417 mm, Breedte: 174 mm, Hoogte: 138 mm. Wielbasis: 239 mm (lange wielbasis).
- De vorm van de Opel Kadett GT/E is authentiek nagemaakt in lichtgewicht polycarbonaat en er is gebruik gemaakt van het kleurenschema van het fabrieksteam van Opel Eurodealer.
- Met 60 mm voor- en achterbanden. Gebruik 60D-banden bij het verwisselen van banden.
- Carrosserie is voorgespoten.

Over het MB-01 chassis
Het compacte 2WD chassis van de MB-01 biedt de keuze uit drie wielbasistypes en voor- of achterwielaandrijving.
Systeem. Zonder de accu, motor en RC-uitrusting uit het midframe te verwijderen, kunt u eenvoudig de
stuurstang gebruiken om te schakelen tussen voor- en achterwielaandrijving; Voor achterwielaandrijving kan voor voertuigen met achterwielaandrijving worden gekozen voor een lage of
hoge motorstand. De 4-wielige ophanging met dubbele draagarmen heeft een
symmetrische constructie en wrijvingsdempers. Uniforme onderdelen zoals de motorsteun, de eindversnellingsbak en de ophanging
vergemakkelijken de montage en het effectieve onderhoud.

Technische gegevens:
- Kitmodel in
schaal 1/10- MB-01 chassis met 2WD-aandrijving-
Lengte: 417 mm, Breedte: 174 mm, Hoogte: 138 mm, Wielbasis: 239 mm (L)
- Prototypische, gelakte carrosserie van polycarbonaat
- M-chassis velgen 60 mm banden voor en achter
- Krachtige 540-motor inbegrepen
- Onafhankelijke wielophanging voor en achter
- Elektronische snelheidsregeling
- Optionele onderdelen optioneel verkrijgbaar

Killerbody Subaru Impreza WRC 2007 finished body

Killerbody Lancia Delta HF Integrale Karosserie Rally-Racing 195mm RTU

Killerbody LED Licht Set mit 18 LED inkl Kontroller Box

Killerbody LED Licht Set mit 10 LED inkl Kontroller Box

Easy and quick installation of the Killerbody LED Light Set for RC Car Bodies. It can be used for nearly any 1/10 Chassis or Body. Perfectly it fits of course in the Killerbody Body shells as some of them already has a LED fixing system included. All wires are ready to connect so that it is not necessary to solder.
Especially in the night your car will look way more realistic but also will show a great performance during the day time.

Thanks to the controller box you can control the LED related to your transmitter like by braking, turning, etc. but you also can have a signal light or headlight function (all is related to the settings and used LED's - related to the configuration)

Scope of Supply:

• 1x LED Controller Box
• 1x Connection wire
• 1x LED Set with 10 LED's (2x white / 2x blue / 2x red / 4x orange)

Killerbody LED Licht Set mit 4 LED inkl Kontroller Box

Easy and quick installation of the Killerbody LED Light Set for RC Car Bodies. It can be used for nearly any 1/10 Chassis or Body. Perfectly it fits of course in the Killerbody Body shells as some of them already has a LED fixing system included. All wires are ready to connect so that it is not necessary to solder.
Especially in the night your car will look way more realistic but also will show a great performance during the day time.

Thanks to the controller box you can control the LED related to your transmitter like by braking, turning, etc. but you also can have a signal light or headlight function (all is related to the settings and used LED's - related to the configuration)

Scope of Supply:

• 1x LED Controller Box
• 1x Connection wire
• 1x LED Set with 4 white LED's

Killerbody LED Licht Set mit 6 LED inkl Kontroller Box

Easy and quick installation of the Killerbody 6mm-LED Light Set for RC Car Bodies. It can be used for nearly any 1/10 Chassis or Body. Perfectly it fits of course in the Killerbody Body shells as some of them already has a LED fixing system included. All wires are ready to connect so that it is not necessary to solder.
Especially in the night your car will look way more realistic but also will show a great performance during the day time.

Thanks to the controller box you can control the LED related to your transmitter like by braking, turning, etc. but you also can have a signal light or headlight function (all is related to the settings and used LED's - related to the configuration)

Scope of Supply:

• 1x LED Controller Box
• 1x Connection wire
• 1x LED Set with 6 white LED's

SkyRC Charging Cable XT60 for Battery with EC5 Connector

SkyRC Charging Cable XT60 for Battery with EC3

Mooie pit mat van marco's model cars / racingline-rc 
lengte 60cm breedte 40cm
een must voor elke hobbyist  

Mooie pit mat van marco's model cars / racingline-rc 
lengte 80cm breedte 40cm
een must voor elke hobbyist  

Hobbywing Xerun XR10 Pro G3 Brushless ESC 160A, 2s LiPo

The Hobbywing XeRun XR10 Pro G3 sets new standards for competition ESCs and raises the performance level with many innovative features. Compared to its predecessor, the XR10 Pro G2S, the ESC is now equipped with a frameless and improved fan. Additionally, the optimized LCG design has reduced the height by 2 mm, leading to a lower center of gravity and improved vehicle balance. Moreover, the XR10 Pro G3 features an integrated data logging module that can store up to 19 data sets of 20 minutes each, eliminating the need for a constant connection to the OTA Bluetooth module.

In addition to the integrated data logging, the G3 comes with many interesting new features! The freewheeling function ensures more efficient cooling by noticeably lowering the operating temperature compared to its predecessor. The new Disc Brake Mode allows extremely precise and linear brake force control, making braking consistent and controllable across all speeds. With over 44 programmable parameters and two adjustment levels, the settings can now be better tailored to any situation.

Features:

• Integrated data logging (OTA/LCD required for analysis)
• Optimized temperature control
• Disc Brake Mode for precise brake control
• 44+ parameters
• Softening 2.0
• LCG design and optimized wiring
• Built-in reverse polarity protection
• Optimized for modified competitions

Technical Data:

Accessories (optional):

HW30502001 LCD programming box
HW30850400 OTA programming module

•  Do you have any questions concerning this product?
•  Further products by Hobbywing

Hobbywing Xerun XR10 Pro G3X Brushless ESC 160A, 2s LiPo

The Hobbywing XeRun XR10 Pro G3X sets new standards for competition ESCs and raises the performance level with many innovative features. Compared to its predecessor, the XR10 Pro G2S, the ESC is now equipped with a frameless and improved fan. Additionally, the optimized LCG design has reduced the height by 2 mm, leading to a lower center of gravity and improved vehicle balance. Moreover, the XR10 Pro G3X features an integrated data logging module that can store up to 19 data sets of 20 minutes each, eliminating the need for a constant connection to the OTA Bluetooth module.

In addition to the integrated data logging, the G3X comes with many interesting new features! The freewheeling function ensures more efficient cooling by noticeably lowering the operating temperature compared to its predecessor. The new Disc Brake Mode allows extremely precise and linear brake force control, making braking consistent and controllable across all speeds. With over 44 programmable parameters and two adjustment levels, the settings can now be better tailored to any situation.

Compared to the G3 standard version in black, the G3X delivers a more aggressive power output and comes standard with 12AWG wires and no reverse polarity protection.

Features:

• Integrated data logging (OTA/LCD required for analysis)
• Optimized temperature control
• Disc Brake Mode for precise brake control
• 44+ parameters
• Softening 2.0
• LCG design and optimized wiring
• Optimized for stock competitions

Technical Data:

Accessories (optional):

HW30502001 LCD programming box
HW30850400 OTA programming module

Intellect MC3 10000mAh 120C 7.6V Long Runtime Graphene Stick Pack LiHV

As the leading manufacturer of lithium batteries for RC car modeling, Intellect presents its new MC3 LiHV battery series.
The MC3 series is the further development of the PT2 Platinum series. It sets a new standard in the RC car scene.
Intellect has a suitable battery in its range for most RC car applications.

Specifications:

• Capacity: 10000mAh
• Nominal Voltage: 7.6V / 2S
• Discharge-Rate: 120C
• Cell Type: Silicon-Graphene Lithium-Polymer
• Length: 139mm
• Width: 47mm
• Height: 25.1mm
• Weight: 335g
• Plug: 5mm

Charging and storage instructions:

Never store your batteries fully charged and or fully discharged. We recommend to store the batteries at the nominal voltage of the battery. We also recommend to use the batteries regulary, if you don't go to the track, then cycle them once every two weeks. The batteries must not be stored in direct sunlight, this also includes your car during a hot summer day. For a long lifetime of your batteries we recommend a charging rate of 1C. A higher charging rate will decrease the lifetime of your battery significantly.

We recommend to use a lipo bag during charging your battery: RUDDOG HD LiPo Ladetasche (180x80x80mm)

Installation:

When installing you battery, we recommend not to place them directly next to your motor. Should it not be possible to place your battery at a different place we strongly recommend the use of a motor fan to keep your motor cool and so also your battery. If you are looking for a motor fan, check out the RUDDOG aluminium fans, which are available in a 30mm and 40mm variant: RUDDOG 30mm Aluminium HV High Speed Cooling Fan and RUDDOG 40mm Aluminium HV High Speed Cooling Fan

Intellect batteries come including battery plugs. If you need additional plugs, you can find a wide range of plugs here: Stecker - RUDDOG Distribution GmbH

Limited Warranty:

We offer the German legal warranty time on all of our batteries. Inproper usage or storage can void this warranty.

Please note:
We do not currently ship LiPo or LiHV batteries outside mainland Europe.

ORCA Mini Level Board (for Hudy Setup Board and others)

Iris ONE.1 Split One-Piece Topdeck 3.0mm

Iris ONE.1 Split One-Piece Topdeck 2.5mm

Iris ONE.1 FWD One-Piece Topdeck 2.0mm

Bittydesign HYPER-GT8 1/8 GT clear body 325mm (LW | 1.0mm)

TAMIYA TA07 Carbon Stiffener (Center)
TA07 Carbon Stiffener (Center)
Increase your setup options for the TA07 PRO chassis with this 2mm thick carbon fiber center stiffener. This lightweight and rigid part fits neatly onto the center brace and rear stiffeners for more rigidity and stiffer pitch damping.
Item Contents
•Carbon Fiber Stiffener (Center) x1
•Screws for attachment included.
•This item pairs perfectly with carbon fiber front (Item 54788) and rear (Item 54789) stiffeners.
•Compatible with TA07 PRO chassis cars.
 

SCHUMACHER Ultra Short Shock Piston 4H pr - Mi6-9,FT8

SCHUMACHER C/F Front Wishbone - Mi9

SCHUMACHER Ball Bearing 1.5x4x2 Shield - pr
Schumacher Bearing Guidlines

Yellow = ABEC5, oil filled, shielded, steel balls recommended for relatively clean conditions. Schumacher On Road cars kit specification.
Red = ABEC5, grease filled, double rubber seals, steel balls recommended for wet or dirty conditions. Schumacher Off Road cars kit specification.
Orange or Grey = ABEC 5, oil filled, shielded, extra hard ceramic balls for higher efficiency. Recommended for On Road.
Black = Pro High Precision German or Japanese manufactured, rubber seal. Recommended for Off Road.
Metal = Pro High Precision German or Japanese manufactured, shielded. Recommended for On Road.

SCHUMACHER Diff Output - Mi9 (pr)

SCHUMACHER Nano Shock Shaft - Mi9 (pr)

SCHUMACHER Alloy ARB Drop Link - Mi8,FT8,Mi9 (pr)

SCHUMACHER Nano Lower Shock Socket - Mi9 (pk4)

SCHUMACHER Alloy LiPo Swivel - Mi8,L1R,FT8,ST2,LD3,Mi9 (pr)
Bling up your car with this cool looking black alloy LiPo swivel.

Increased strength over kit item.

When combined with U8438 Alloy Lipo Mounts - LD2 (pr) we suggest using a plastic LiPo swivel or a plastic height adjustment washer when using these as an insulator from short circuit.

Contact 1/12 Universal Truer Arbor

SCHUMACHER M3 Brass Black Thread Inserts - pk10

SCHUMACHER Wheel Front Med 2WD - Flexlite White - pr
Wheel Front Med 2WD - Flexlite White - pr
 

Bearing size - 3/16 x 3/8 

SCHUMACHER Rear Belt; Black 60T - Mi1 ,Mi2EC

SCHUMACHER Front Belt - Mi1 - Requires U7708 Belt Adj
This is a new version Mi1v2 belt, supplied from 2020.

The older grey belt is not available anymore.

It requires U7708 if you have an older car and this is not fitted to you car already.

SCHUMACHER Hexagon 3D Flex Bumper Mi7,Mi8,Mi9
For the Mi9 is this Hexagon 3D Flex Bumper.

Weighing in at 10g the new TPU bumper is primarily for the new Mi9, but will also fit the Mi7 and Mi8.  It is designed to give a great fit for the popular Xtreme Twister/Speciale body's, and also looks great too!

The bumper has a 10mm longer protrusion so gives a better fit for the modern method of forward mounted bodies.  No more need for extra bumper foam!

The flexible design provides great impact resistance too. 

SCHUMACHER Driveshaft E-Clip V2 - Mi9 (pk10)
Special E clip for Mi9 driveshafts.

Easier fitting than kit item.

SCHUMACHER M2 x 4 Button Hd -1.5 Hex (pk 10)
M2 x 4 button head screw. Used as a bleed screw in shock caps.

SCHUMACHER Decal - Mi9

SCHUMACHER Rear Axle - Mi9

SCHUMACHER Front Axle - Mi9

SCHUMACHER Rear Driveshaft Bone - Mi9