TAMIYA 50673 RC 5Spoke Two piece Wide Wheels

1/10 RC 5Spoke Two piece Wide Wheels

Velgen chroom-wit 30mm breed

Tamiya nummer: 50673

Hobbywing Capacitors Module Stock Non-Polarity 30840004

Hobbywing Capacitors Module Stock Non-Polarity

MMC-SERVOHORN-25T-BL

MMC-SERVOHORN-25T-BLAUW OFFSET

SRT Servo DL3020 Metal gear Waterproof 20.0kg/0.11sec @6.0V

Servo DL3020 Metal gear Waterproof 20.0kg/0.11sec @6.0V

Specifications

Speed	0.13s (4.8V) 0.11s (6.0V)
Torque	18kg-cm (4.8V) 20kg-cm (6.0V)
Gear Train	Copper & Aluminium
Motor	DC
Case	Plastic
Dimensions	40.7 x 20.5 x 39.5 mm
Weight	56g

Datasheet

• Manufacturer : SRT

SRT Servo CH6012 Low Profile Coreless HV 11.0kg/0.06sec @7.4V

Specifications

• Type: Digital
• Bearing: Dual
• Motor Type: Coreless
• Gear Type: Metal
• Gear Material: Titanium & Alu
• control system: pulse width control  
• working frequence: 1520μs / 330hz 
• operating voltage: dc6.0-7.4v 
• operating temperature range: -10 to + 60 degree
• operating speed (6.0v): 0.07 sec/60 degrees at no load
• operating speed (7.4v): 0.06 sec/60 degrees at no load
• stall torque (6.0v): 9.0kg.cm (125.0 oz/in)
• stall torque (7.4v): 12.0kg.cm (166.6 oz/in)
• potentiometer drive: direct drive 
• dimensions: 41.0x20.0x26.4 mm /1.61x0.79x1.04 in 
• weight: 41.0g (1.45 oz)
• connector wire length: jr 180 mm

Datasheet

• Manufacturer : SRT

Robitronic Razer ten Brushless Combo 50A 3652 3000kV

Razer ten 50A ESC
 

• Fully waterproof and dustproof
• ON / OFF switch with setup button
• S-BEC with 6V and 3A peak current
• Plug and Play, battery and motor plug already soldered
• Multiple protections: undervoltage shutdown, thermal protection and protection against signal loss.
• Simple programming via set button
• Separate programming port, easy connection of the LED program card (optional)

Razer ten 3652 3000kV Motor
 

• 4-pole rotor design for high torque and fast response
• CNC machined, high-strength aluminum housing for optimum heat dissipation
• Motor winding made of pure, double insulated copper wire
• Precision ball bearing for best running smoothness and service life
• Highly flexible silicone connection cable with soldered 4mm plugs
• High strength and polished 3.17 mm rotor shaft made of steel

Specifications

ESC :

Constant/Peak current:	50A / 300A
Type :	Sensorless
Motor limit:	2s Onroad: 3650 Motor, >=8T 2s Offroad: 3650 Motor, >=11T 3s Onroad: 3650 Motor, >=11T 3s Offroad: 3650 Motor, >=14T
Internal resistance:	0.001 Ohm
LiPo / NiMH cells:	2-3s LiPo / 6-9 cells NiMH
S-BEC:	6V/3A
Programmation port :	Yes
Dimensions :	48.5x38x32mm
Weight :	90g
Usage :	1/10 OnRoad and Offroad

 

• Battery connector : T-Plug
• Motor connectors : 4mm bullet

 

Motor :

• Kv :3000
• LiPo cells : 2S-3S
• Poles : 4
• Shaft : 3.17x15mm
• Ext. diameter : 35 mm
• Length : 52 mm
• Weight : 198 g
• Usage : 1/10 On Road, Buggy, Light SC, Truck, MT

 

Datasheet

• Manufacturer : Robitronic

TAMIYA 57879 1/10 RC XB Lowride Pumkin M-06 Incl. Zender Carson X1

57879 1/10 RC XB Lowride Pumkin M-06 Incl. Zender Carson X1

Tamiya 57879 RC RTR LOWRIDE PUMPKIN M06

Artikelnummer: 57879
EAN: 4950344578795

The Lowride Pumpkin M06 produced by Tamiya in 1/10 scale XB series RWD drivetrain RTR (Ready-to-Run), is classified in R/C Models - On-Road - M-Chassis Cars

This is a fully factory assembled and ready-to-run R/C model of the Lowride Pumpkin. The painted and finished super detailed ABS molded body is mated to the easy to maintain rear wheel drive M-06 chassis platform.
The M06 chassis features a 2WD rear-drive drive-train with fully independent double wishbone suspension. The layout features a longitudinally-mounted battery with the R/C components positioned on either side. The 4-wheel double wishbone suspension is paired with rear 60D Super Grip radial tires for improved rear traction. The pre-installed 2-channel radio gear system operates on 2.4GHz technology which allows you to run your vehicle anywhere without the need to worry about other R/C enthusiasts nearby.

Specifications:
- Scale 1/10
- Construction type: RTR (Ready-to-Run)
- Terrain use: On-Road
- Drive-train: 2WD RWD
- Drive type: Gearbox
- Drive line: Dog bone
- Differential type: Gear
- Suspension: Fully independent double wishbone
- Steering mechanism: Bell-crank
- Shock damper Friction damper
- Shock damper material: Plastic
- Tire type: Rubber
- Tire tread: Radial
- Body material: ABS Plastic
- Chassis material: Plastic
- Electronic Speed Control (ESC): Included
- ESC model: TEU-105BK
- LED Light buckets: No
- LED lights: No
- Motor: 540-brushed type
- Bearings: Plastic bushing
- Adjustable camber: Fixed
- djustable toe angles: Front only
- Adjustable ground clearance: Yes
- Adjustable gear ratio: Yes
- Adjustable wheelbase: Yes
- Adjustable track width: Fixed
- Adjustable shock angle: Yes
- Special feature 1: Factory finished R/C model.
- Special feature 2: Body is pre-painted with markings already applied.
- Special feature 3: The M-06 chassis features a rear-motor, rear-wheel drive setup.
- Special feature 4: Metal-plated disc wheels.
- Special feature 5: Includes: Carson X1 2.4GHz R/C system pre-installed.
- Special feature 6: Includes: TEU-105BK ESC (equipped with BEC) pre-installed.
- Requires A: 7.2 battery & charger
- Requires B: AA batteries
 

montech1/10 Mini Car (M-chassis) 160MM Body - RS Sport-M

1/10 Mini Car (M-chassis) 160MM Body - RS Sport-M

Glow Starter 2000 mAh & Charger (Blister Pack)

Glow Starter 2000 mAh & Charger (Blister Pack)

Hoogwaardige rugzak hardcase carbonlook

Hoogwaardige rugzak hardcase carbonlook

TAMIYA Karosserie Ebbro 350R / Mach GoGoGo Sh.

TAMIYA EMBRO BODY ZONDER STICKERS EN SPOOILER.
DE BODY VOOR DE TAMIYA RACE FAN!!!!
Passend für Tamiya Modelle im Maßstab 1/10 mit 257mm Radstand.
Radstand: 257mm (standard)
Länge: 442mm
Breite: 191mm

Ruddog 5mm Gold Cooling Head Bullet Plugs 2PCS

Ruddog 5mm Gold Cooling Head Bullet Plugs

2 STUKS

T-Work's Silver Solder Wire 3% Ag. 15g

T-Work's Silver Solder Wire 3% Ag. 15g

WTF 40mm Ultra High Speed Motor Cooling Fan Soft Core 2022 Version

All new 40mm fan, the little vortex generator balde. The soft start circuit will help surge power that may kill the motor in extreme case. The new item is called the softcore 40, most powerful yet from WTF.

Specifications:

Voltage	7.2-8.4V
Ampere	0.64A @8.4V
RPM	14000 - 15000 @8.4V
Weight	15.4g

Core RC Alloy Servo Arm Offset Short - 25T Futaba

CORE RC short alloy offset servo arm, with clamp fixing. 16mm and 21mm arm mount options.

Intellect 3000mAh 3.7V 1S TX LiPo for Sanwa MT44

Specifications:

Voltage	3.7V
Capacity	3000mAh
Cells	1S
Connector	RX
Dimensions	60 x 45 x 10 mm
Weight	53g

Arrowmax Tyre Warmer (1/10th) & Batt Warmer with Bag Black Golden

Arrowmax compact tyre and battery warmer. The device utilises a compact control unit for easy storage and less pit space needed with the warmer cups being of Arrowmax’s signature black and golden design. They connect to the front side of the case, ensuring easy organisation of the wires. The control unit is equipped with an XT60 connector, allowing to power the tyre warmer using a 13.8V power supply or a 3S LiPo battery. Built-in sensors ensure precise temperature control, independently for the front and rear tyres, and the warmer not only is usable as a tyre warmer but also as a battery warmer using an optional warming bag. Pre-set values ensure performance enhancing and very high user safety.

These tire warmer cups will keep warm in longer time and the outer silicone material will not burn your hands easily.

T-Work's Tire Gluing Band 1/8 Buggy (8pcs)

T-Work's Tire Gluing Band 1/8 Buggy (8pcs)

Sanwa Black Servo Pin Housing

Sanwa Black Servo Pin Housing

Ruddog Aluminium Offset Servo Horn 25T (Black)

Ruddog Aluminium Offset Servo Horn 25T (Black)

TAMIYA 47390 1/10 R/C Avante (2011) Zwart Special

Tamiya 47390 1/10 R/C Avante (2011) Zwart Special
Dit is een Limited-Edition Black Special-release van de Avante 2011-editie, die oorspronkelijk werd uitgebracht om de 35e verjaardag van Tamiya R / C-autoproducten te herdenken. Het heeft een kleurenschema geïnspireerd op zijn Mini 4WD-neef de Avante Black Special.

Over de Avante:
De machine is voorzien van een uniek asaangedreven 4WD-systeem dat is overgenomen van Tamiya's eerste 4WD R / C buggy, de Hotshot. Het beschikt over een zeer geavanceerd ontwerp, waaronder een FRP dubbeldeks chassis lay-out, longitudinale motor- en batterijposities, en een formule-type carrosserie met chassiskuip. Het is uitgerust met innovatieve componenten zoals een compacte versnellingsbak met 3 kleine planetaire versnellingen, een centrale diff om de stabiliteit te vergroten, een volledig instelbare ophanging en nokkensluit wieldoppen.

De moderne specificatie van de auto heeft een paar updates, zoals universele aandrijfassen en bewerkte aluminium staanders, waardoor deze versie meer duurzaamheid en prestaties krijgt dan het origineel.

1/10 schaal R / C as aangedreven 4WD buggy montage kit. Lengte: 420mm, breedte: 240mm, hoogte: 140mm. Wielbasis: 260mm.
Koolstofvezel onderdelen zoals 2 mm dikte boven- en benedendekken, plus achterste demper blijven bieden uitstekende sterkte.
Inclusief Avante (2011) Racing Steering Set, met een koolstofvezel stuurplaat van 2 mm dikte en 850 kogellagers die zijdezachte bewegingen geven.
Inclusief Avante (2011) Torque Splitter Set, met koppelsplitser en kogeldifferentiëlen voor trefzekere tractie.
4-wiel dubbele wishbone ophanging heeft metalen assen voor grote aanpasbaarheid.
Aluminium voorste staanders.
Spike banden zijn gemonteerd op fluorescerende roze wielen.
Wordt geleverd met een 25-draaimotor met een speciaal label.
Vereist: 2-kanaals radio, servo, ESC (elektronische snelheidsregeling) 7.2volt batterij en oplader, en Tamiya PS-verf.

Tamiya nummer: 47390
EAN: 4950344473908
 

LRP VTEC LiPo 2500 RX-Pack 2/3 Straight - RX-only - 7.4V

LRP VTEC LiPo 2500 RX-Pack 2/3 Straight - RX-only - 7.4V

Racing Performer 70mm Brushless Sensor Cable ver.2

Racing Performer 70mm Brushless Sensor Cable ver.2

Muchmore Super Flexible Sensor Cable 180mm for Brushless ESC

Muchmore Super Flexible Sensor Cable 180mm for Brushless ESC

Muchmore Super Flexible Sensor Cable 135mm for Brushless ESC

Muchmore Super Flexible Sensor Cable 135mm for Brushless ESC

Muchmore Super Flexible Sensor Cable 150mm for Brushless ESC

Muchmore Racing Super Flexible Sensor Cable can be bent naturally. In general use in ESC and brushless motors are available. Especially when used in 1/12th, 1/10 F1 you can get less interfernece betweeen motor mount and chassis.

Core RC - SETUPBOORD TAS

Neoprene, zip up bags to protect your set up board during transportation. With cool branded look! Also make great laptop bags.

40x30cm

MR33 Droop Blocks

MR33 Droop Blocks

The "Droop Blocks" are needed to adjust the suspension travel of 1/10th scale onroad vehicles together with the MR33 Circle Droop Gauge (MR33-CDG). The vehicle is placed on the 10x10mm thick blocks and then the suspension travel can be perfectly read and adjusted on the gauge. The blocks can also be used with other gauges that require 10mm droop blocks!

Technical specification

Setup Tools:

Droop Gauges

TAMIYA 58703 1:10 RC au TOM'S GR Supra (TT-02)

1:10 RC au TOM'S GR Supra (TT-02)

De Toyota GR Supra GT500 werd in de GT 500 serie opgenomen en als opvolger van de Lexus LC500 ontwikkeld. Het moderne aerodynamische design en de Neon-Lackierung maken dit model tot een hoogtepunt in de serie. Als basis dient dem 58703 TAMIYA model in een schaal van 1:10 het TT-02 Chassis. Hiermee zijn de radiostand, de botsvrijheid, de sporing en het stuur volledig instelbaar en met de vele optionele Tuning-elementen kan het chassis eenvoudig tot een racer worden getuned. De 4WD-aandrijving met centrale uitlaat, dubbele Querlenker en Federbeine op alle vier de wielen zorgen voor een optimaal rijgedrag en een optimaal rijgedrag. De Chassisunterseite is extra strak vormgegeven en de batterijlader sluit alle gangbare accu's aan. Optisch hoogtepunt zijn de Radmitnehmer, die angesetzte Bremsscheibenattrappen haben. Benötigtes Zubehör: Fernsteuerung mit Empfänger, Lenkservo, 7.2V NiMH Akkupack, Ladegerät, Farbe für Polycarbonatkarosserie (TAMIYA PS-)
Tamiya kondigt met trots de release aan van de Toyota GR Supra GT500 als een 1/10 R/C modelbouwpakket gebaseerd op het TT-02 chassis. De GR Supra GT500 werd ontwikkeld in overeenstemming met de GT500 klasse reglementen als vervanger van de LEXUS LC500 die floreerde in drie seizoenen van 2017 tot 2019. Met het gestroomlijnde autodesign van de roadgoing GR Supra, beschikt deze raceauto over een carbon monocoque frame, speciale aerodynamische componenten en transmissie, plus een 2.000cc inline 4-cilinder turbomotor met directe injectie "RI4AG."

Over het model
- Dit is een 1/10 schaal R/C modelbouwpakket. Lengte: 466mm, breedte: 188mm, hoogte: 125mm. Wielbasis: 257mm.
- De krachtige vorm van de GR Supra GT500 is in stijl gevangen door een lichtgewicht, stijve polycarbonaat body (helder) met aparte polycarbonaat koplampbehuizingen (LED's zijn niet te bevestigen) en canards.
- Afzonderlijke zwarte ABS-hars onderdelen geven op realistische wijze de kenmerkende zijspiegels en een grote achtervleugel weer.
- Het model maakt gebruik van het as-aangedreven 4WD TT-02 chassis dat een superieur aanpassingsvermogen en stabiliteit biedt.
- 12-spaaks gun metal wielen zijn gecombineerd met race slick banden.
- Inclusief item 51007 (Urethaan Bumper M (TT-01/TGS)) om de carrosserie in topconditie te houden.
- Wordt geleverd met stickers en maskeer stickers voor gebruik in de paint job

Tamiya nummer: 58703

TC030 1/10 BMW E30 BA

TC030 1/10 BMW E30

BMW M3 E30

WB 258mm

Width 190mm

Clear Lexan Body

W/3D Print Rear Wing/Front Bumper

Incl: 

E30 Decal Sheet

Window Mask

TC403 1/10 F1 Body, 0.6mm

TC403 1/10 F1 Body, 0.6mm

TC401 1/10 F1 Body

TC401 1/10 F1 Body

F1 Body

Clear Lexan Body

TS003 1/10 TC-01 Body Set

TS003 1/10 TC-01 Body Set

TC-01 Body Set

For Tamiya TC-01

Clear Lexan Body

TC040 1/10 Ferrari F40, 190mm SH

TC040 1/10 Ferrari F40, 190mm

Ferrari F40

Width 190mm

WB 258mm

Clear Lexan Body w/Rear Wing

W/3D Print Mirrors, Light Buckle, Light Pod

Incl:

F40 Monte Shell Decal Sheet

Window Mask

TC064 1/10 Toyota Celica GT-4 Rally, 190mm

TC064 1/10 Toyota Celica GT-4 Rally, 190mm

Toyota Celica GT-4 Rally
WB 258mm
Width 190mm
Clear Lexan Body W/Rear Wing
With Light Buckles and Mirrors
Incl:
Celica GT-4 Decal Sheet
Window Mask

TC046 1/10 BMW E36

TC046 1/10 BMW E36

BMW E36

WB 258mm

Width 190mm

Clear Lexan Body 

Incl:

E36 Park N Shop Decal Sheet

Window Mask

TC046 1/10 BMW E36, 190mm WATSON'S

TC046 1/10 BMW E36, 190mm

BMW E36

WB 258mm

Width 190mm

Clear Lexan Body 

Incl:

BMW Watson's Decal Sheet

Window Mask

TEAM C CB400 1/10 Crawler Body, 324mm

CB400 1/10 Crawler Body, 324mm

Crawler Body

WB 324mm

Width 240mm

Clear Lexan Body

Incl:

Light Decal

Window Mask

T-Work`s ECS Drive Shaft for Xray X4

T-Work`s ECS Drive Shaft for Xray X4

Cardan drive shafts for the front axle of the Xray X4 touring car.

Content: 2 pieces

TAMIYA 46702-S 1/10 RC X-SA Racing Fighter RTR (DT-03) RC ingebouwd

Tamiya 46702-S 1/10 RTR Racing Fighter (DT-03)

De TAMIYA X-SA modellen zijn kant en klare auto´s van TAMIYA. Het model werd in de fabriek geassembleerd, inclusief de afgewerkte carrosserie. Het model is uitgerust met de elektronische snelheidsregelaar TEU-105BK en een elektromotor.
Wij bieden de Fighter RTR aan met een Carson X-1 zender. Het model is al volledig ingesteld, zodat u direct met het model kunt rijden.

Over het model:
- Dit is een afgewerkt R/C model in schaal 1/10 Lengte: 400mm, Breedte: 244mm, Hoogte: 134mm.
- Polycarbonaat body en vleugels zijn gespoten en bestickert
- Geribde voorbanden en banden met vierkante spikes achter zorgen voor betrouwbare off-roadprestaties.
- De DT-03 maakt gebruik van een robuust monocoque frame. De lange wielbasis (287 mm) en het grote loopvlak (voor: 221 mm, achter: 208 mm) zorgen voor geweldige prestaties op en naast de weg!
- De voorste draagarmen hebben een sliphoek van 25 graden voor een geweldige terreinvaardigheid.
- Voorzien van een afgedichte achterste versnellingsbak met intern differentieel en stofbestendig. 
- ESC: TEU-105BK
- Motor: Type 540
- Afstandsbediening Carson X-1
- Servo C5

Benodigde accessoires: 7,2V NiMH-accu, lader voor rijaccu

Leveromvang:
- Volledig gemonteerd, klaar om te rijden Racing Fighter met een Carson X-1 zender.

MR33 Bumper & Body Space Setup Sponge 18x13x5mm (3) 18x13x2mm (3)

MR33 Bumper & Body Space Setup Sponge 18x13x5mm (3) 18x13x2mm (3)

The self-adhesive MR33 foam strips are extremely important and useful when fitting a body. They are glued into the front of the body to perfectly close the gap that usually exists between the body and the frame. This prevents the body from fluttering or being pushed in at high speeds or in strong winds.

Contents: 3 thick (18x13x5mm) and 3 thin (18x13x2mm) strips.

Ride Body Protect Sponge Pad incl. Adhesive Tape - White

Ride Body Protect Sponge Pad incl. Adhesive Tape - White

ABSIMA 3-channel receiver suitable for CR2S(V2), CR3P and CR4T radio - Waterresistan

3-channel receiver suitable for CR2S(V2), CR3P and CR4T radio - Waterresistant.
 
Specification:

• 2.4Ghz A.F.H.D.S. system
• 3-channel
• Water-resistant 
• Failsafe function
• Measurement: 35 x 21 x 12mm
• Weight: 10g
• Voltage: 4,8V - 6,6V

The "CR4S" is a 4-channel remote control including receiver, which uses the latest AFHDS 2.4GHz "ANT" frequency hopping technology from ABSIMA

FEATURES
    
Description of the channels (the transmitter has 4 channels which are assigned as follows):
CH1: Steering wheel
CH2: Throttle lever (Trigger)
CH3: 3-position toggle switch
CH4: Push button
 
Reverse function (REV): This function can be used to set the direction of rotation of the steering servo/motor.
 
Trimming (TRIM): Adjustment of the straight run and throttle neutral position.
 
Dual Rate function (D/R): The steering angle and also the motor rotation power can be increased or reduced by operating this rotary knobs.
 
Failsafe function: This function determines what the receiver should pass on if the signal to the transmitter is lost (e.g. emergency braking).
 
Beginner modus: This function is intended for newcomers. In this mode the motor power is automatically reduced to 50%.
 
      
 
SPECIFIKATION 
 
Radio CR4S:
Channels: 4
2.4GHz Protocol: ANT
Distance: >150m
Battery (not included): 4*AAA 1.5 - 6V DC
Low V Warning: <4.2V (only NiMH)
Using LiPo TX battery possible: Yes (only LiPos with built-in low V protection)
Charging interface: No
Antenna type: Single antenne
Temperatur range: -10°C - +60°C
Size: 118*73*145 mm
Weight: ca. 130 g
 
Receiver R4WP Micro (2020016):
Channels: 4
Antenna type: external single antenna
Waterproof: Yes
Power: 3.5-8.4V
Failsafe: Yes (in connection with radio)
Temperatur range: -10°C - +60°C
Weight: 5 g
Size: 30.2*18.0*13.0 mm
 
 
SET INCLUDES
 
1* 4-Channel radio "CR4S"
1* 4-Channel receiver
1* Antenna tube
1* Manual (DE/ENG/FR)

This waterproof receiver uses the new AFHDS 2.4GHz ANT frequency technology and has a very compact design with a size of 22.6*20.6*25.5mm.

4-channel receiver "R4WP" with internal antenna suitable for "CR4S" 2.4Ghz remote controller.
 
This waterproof receiver uses the new AFHDS 2.4GHz ANT frequency technology and has a very compact design with a size of 22.6*20.6*25.5mm. 
 
Specification: 
 
Channels: 4 
2.4GHz Protocol: ANT
Suitable for: CR4S and other remote controllers with ANT technology
Distance: >150m
Antenna type: buildt-in
Waterproof: Yes
Power: 3.5-8.4V
Failsafe: Yes (in combination with remote control)
Temperature range: -10°C - +60°C
Weight: 6g
Dimensions: 22.6*20.6*25.5mm

Ray Tronic C30 Plus DC 300W Balanced Charger

The Raytronic C30 + 300W was designed to offer an intelligent pocket charger with high performance and very simple operation. RAYTRONIC C30 + allows charging and discharging common types of cells (NiCd, NiMH, LiPo, LiHV Li-ion, LiFe, Pb), in addition it is equipped with a built-in six-channel balancer, which ensures safe and comfortable charging of lithium batteries. Measurement of voltage and internal resistance of individual cells (for lithium batteries) is a matter of course.

Features:

• Input supply voltage 10 - 26 V DC (socket XT60)
• For charging and discharging 1 - 16 NiCd / NiMH cells, 1 - 6 Li-ion / LiPo / LiHV / LiFe cells or 2- 20 V lead-acid batteries
• Adjustable charging current (0.1 A - 12.0 A)
• Adjustable discharge current (0.1 A - 3.0 A)
• Max. power for charging 300 W, for discharging 5 W
• Termination of charging using delta-peak automation for NiCd and NiMH batteries
• Lithium and Pb batteries are charged using the "constant current / constant voltage" method
• Adjustable delta-peak detection sensitivity for NiCd and NiMH batteries
• Adjustable end voltage for charging and discharging for lithium batteries
• Repeated cyclic operation of charging / discharging or discharging / charging for NiCd and NiMH batteries, up to 5 cycles
• Four charging modes for lithium batteries - normal charging, fast charging, balancing charging and storage charging / discharging
• Stop charging when the set time or the supplied charge is exceeded.
• Memory for 5 charging / discharging programs.
• Measurement of the total voltage of the set and individual cells (for lithium batteries)
• Measurement of the total internal resistance of the set and individual cells (for lithium batteries)
• The XT60 power output socket and the JST-XH 2-6S universal balancer socket allow you to connect the rechargeable battery directly without the need for a charging cable and balancer adapter (if the kit is equipped with an XT60 power connector and a JST-XH service connector)
• Two-line backlit LCD display with simple and clear menu and display of parameters during charging / discharging
• A number of warning text messages contribute to safe operation - incorrect input voltage, incorrect connection, unsuitable battery or its condition, incorrect polarity at the output
• Reverse polarity and short circuit protection at the output / li>
• Compact plastic case, small dimensions
• Built-in fan for forced cooling

Specifications:

Input voltage [V]	10 - 26
Charging current [A]	0.1 - 12
Discharge current [A]	0.1 - 3
Number of channels	1
NiCd	1 - 16
NiMH	1 - 16
Li-Pol	1 - 6
Li-Ion	1 - 6
Li-Fe	1 - 6
Li-HV	1 - 6
Pb	1 - 10
Balancer	Yes
Charging power [W]	300
Discharge power [W]	5
Balancer current [A]	1
Length [mm]	87.5
Width [mm]	48.5
Height [mm]	30
Weight [g]	95

Ruddog 3200mAh 3.7V MT-44 MT-5 LiPo TX Battery

Ruddog 3200mAh 3.7V MT-44 MT-5 LiPo TX Battery

LRP universal charging lead - Sanwa / Graupner / JR - rx / t

LRP universal charging lead - Sanwa / Graupner / JR - rx / t

LRP universal charging lead - Futaba rx / tx plug

LRP universal charging lead - Futaba rx / tx plug

XRAY X4F GRAPHITE UPPER DECK - SPLIT REAR - 2.0MM

X4F GRAPHITE UPPER DECK - SPLIT REAR - 2.0MM