This is a spare body parts set of the 1/10 scale FIA Formula E Gen2 race car. It is specifically designed to fit the Tamiya TC-01 chassis machine.

• Polycarbonate body. Rear wing and side parts, with halo and side mirrors molded as separate components in polycarbonate-ABS (white).
• Stickers included to decorate your car in the futuristic looking Championship Livery scheme.
• Compatible with TC-01 chassis cars only.

This Hop-Up Option is for use with the TC-01 chassis, and helps to contribute to superior cornering stability.

• Soft (1.1mm), Medium (1.2mm) & Hard (1.3mm) Stabilizer Rods x1 each
• Aluminum hex head ball connectors allow easier adjustment.
• The stabilizer can be employed on the front or the rear, helping the car balance going through corners. It fits snugly between the upper cover and the chassis, and clearance can be adjusted via the 3x3mm grub screws.
• Black base color rods have color markings to differentiate their stiffness.
• Compatible with TC-01 chassis cars.
• Requires TWO sets to compete one car with front and rear sway bars.

Tune up your TB-04 or TB-04 PRO chassis model with this steel bevel gear set. Steel bevel gears possess highly durable teeth, enabling them to be used in conjunction with high-powered motors. This set contains the bevel gears to fit out one gear differential.

20T Steel Bevel Gear x2
12T Steel Bevel Gear x4
Compatible with TB-04, TB-04 PRO and TC-01

This titanium screw set is for the TC-01 chassis. It contains 76 screws of different types, which are in total roughly 13g lighter than kit-standard steel equivalents. They employ Hex heads to enable even more secure tightening compared to Philip head screws in the original kit.

• 3x5mm Titanium Hex Head Screws x4
• 3x6mm Titanium Hex Head Screws x6
• 3x8mm Titanium Hex Head Screws x18
• 3x10mm Titanium Hex Head Screws x13
• 3x12mm Titanium Hex Head Screws x12
• 3x6mm Titanium Hex Head Countersunk Screws x5
• 3x8mm Titanium Hex Head Countersunk Screws x10
• 3x10mm Titanium Hex Head Countersunk Screws x8
• Compatible with TC-01 chassis cars.

TAMIYA TC-01 Universal Propeller Shaft (1Set)

Suspension Mount Shim Set 0,2/0,3mm (10)

Speed up your pit work with these handy U-shaped shims, which promise faster, hassle free suspension setup changes.

Item Contents/Information:
- 0.2mm Shims x10
- 0.3mm Shims x10
- U-shaped shims can be inserted without the need to remove the mount screws, speeding up your adjustments.
- Use different thicknesses of shim to fine-tune your suspension to perfection

These double cardan shafts promise super-efficient power and enhanced durability for your touring car chassis model. They are designed to fit the Tamiya TC-01 and TB-05 chassis machines. They may also be used with Tamiya cars outfitted with the TRF 419 (Tamiya Racing Factory) Suspension Upgrade Set or the TA05 & TA05IFS Short Reversible Suspension Set.

• Assembly type 39mm Double Cardan Joint Shafts x2
• Dual joints ensure that rotation is efficient, and the motor's drive is transmitted to the wheels with minimal power loss.
• Black finish.
• Needle pin length has been increased from 9.8mm to 10.8mm, for improved durability when using separately sold Item 54921 Reinforced Swing Shaft Caps.
• Compatible with TC-01 and TB-05 chassis cars, or those using Items 54886 or 54083.

This is an aluminum spur gear holder for the TC-01/TB-05 chassis. It replaces the kit standard stamped steel part for increased rigidity and a lighter weight model.

• TC-01/TB-05 Aluminum Spur Gear Holder x1
• This lightweight (2.6g) aluminum component can be used in place of the kit-standard steel part (7.1g) for a weight savings of approximately 4.5 grams.
• Hard-anodized coating for increased durability.
• Compatible with TC-01 and TB-05 PRO chassis cars.

TG10 achterwielas TA01,TL01,TT01R

TOP Deck Carbon TRF420X (42382)

Tamiya is verheugd te kunnen aankondigen dat de lichaamsdelen van onze onlangs aangekondigde 1/10 R/C Toyota Celica GTFour RC (ST185) (TT-02) kit (item 58730) ook als afzonderlijk item in de verkoop zullen gaan.

Artikelinhoud/informatie
- De krachtige vorm van de Toyota Celica GT-Four is vastgelegd in lichtgewicht polycarbonaat.
- Inclusief markeringsstickers en maskeerstickers voor gebruik tijdens het spuitwerk.
- Er worden ook metalen onderdelen meegeleverd voor bevestiging.
- Compatibel met TT-01 Type-E en TT-02 (exclusief TT-02B, TT-02T en TT-02FT) chassisauto's met een wielbasis van 257 mm.
- Wordt geleverd in een slimme, speciale kartonnen doos

TRF aluminium tuningsdemperset M-Chassis

Tot nu toe hebben M-Chassis piloten te maken gehad met touringcar aluminium dempers voor de afstelling van hun auto's. Tamiya heeft nu deze nieuwe set van 4 dempers specifiekgenaakt voor het M-chassis met dempercilinders en demper stangen die 2 mm korter zijn. Hierdoor wordt de rijhoogte van het chassis rijhoogte lager en kunnen de rijeigenschappen nauwkeuriger worden ingesteld. Een harde zwarte coating vermindert de wrijving en dient als een mooi contrast met de blauwe demper doppen. Tevens worden er witte demper veren meegeleverd om het geheel nog meer teverfraaien.
Compatibel met volgende chassis: M-03, M-04, M05, M06 en MF-01x

TAMIYA TRF Damper Urethane Bushing (10) - 53577

Tamiya TRF Wiel nut 4mm Serrated (8) Black

TRF421 BB-Parts

TRF421 C-parts fusee

TRF421 D-Parts onderste draagarm

TRF421 Damper Oil Seals

TRF421 Demper Parts

TRF421 Front Direct Pulley (37T)