info

Je hebt het minimaal aantal bereikt

Winkelwagen (0)

Er zijn nog geen producten in uw winkelwagen geplaatst.

Laders

Weergave:
  2 / 5  



Bezig met laden...
Junsi iCharger 406 Duo - 12V LiPo Charger - 406DUO

Snel bekijken

(0)
Niet op voorraad
Junsi iCharger 406 Duo - 12V LiPo Charger - 406DUO

Junsi iCharger 406 Duo - 12V LiPo Charger - 406DUO

(0)
€ 355,00

Maximum Charge Power 1400W at >26V (1000W max. per channel)
Charge Current Range 5mA - 40A per channel (up to 70A in synchronous mode)
Discharge Current Range 5mA - 40A per channel (up to 70A in synchronous mode)
Input Voltage 10 - 30V DC
Input Current 60A (47A single channel maximum)
Maximum Discharge 80W per channel (up to 140W in synchronous mode)
Maximum Regenerative Discharge 1000W per channel (up to 1400W in synchronous mode)
Maximum External Discharge 1000W per channel (up to 2000W in synchronous mode)
Current Drain For Balancing 1.2A per channel (up to 2.4A in synchronous mode)
Balance Accuracy 10mV
LiPo/LiIo/LiFe 1 - 6 series
NiCd/NiMh Cell Count 1 - 25 series
Pb Battery Cell Count 1 - 18 series
Battery Setup Memories 64 user presets
Intelligent Temperature Control Yes
USB Charging Port 5V , 1A (1.2A current limiting protection)
PC Connectivity Mini USB 2.0
Dimensions 171x118x59mm
Weight 910g

Kavan C100 Duo Balanced Charger 2x 500W

Snel bekijken

(0)
Niet op voorraad
Kavan C100 Duo Balanced Charger 2x 500W

Kavan C100 Duo Balanced Charger 2x 500W

(0)
€ 189,95

The small KAVAN C100 Duo 2x500W dual channel charger has been designed to offer an intelligent, high performance charger with mains and car battery power and very simple and clear operation. The C100 Duo can charge and discharge common cell types (NiCd, NiMH, LiPo, LiHV, ULiHV, Li-ion, LiFe, Pb), plus it features built-in six-channel balancers to ensure safe charging of lithium batteries. The charger is equipped with a colour LCD display and programming buttons that provide you with the possibility of comfortable and very clear parameter setting, control and monitoring of the charging/discharging process. Of course, English and German menus are available.

In addition to the compact "palm-sized" design and intuitive operation, it is worth a special mention: 

  • charging program for new types of "high voltage" lithium batteries LiHV with a terminal voltage for charging up to 4.35 V and ULiHV with a terminal voltage of 4.45 V
  • powerful balancer with current up to 1.5 A
  • synchronous operation of both channels for charging two identical batteries or parallel charging of one battery up to 800 W
  • adjustable end-voltage for charging and discharging of lithium batteries (allows more gentle charging, which aviators like, or, on the contrary, brutal overcharging, which "car guys" like)
  • adjustable end-voltage for charging of lead-acid batteries (1.90-2.45 V; allows charging of all types of lead-acid batteries)
Overview of basic functions and parameters:
  • Mains power supply 100-240 V/50-60 Hz
  • Power supply 10-30 V DC (XT60 socket)
  • For charging and discharging 1 - 16 NiCd/NiMH cells, 1 - 6 Li-ion/Li-poly/Li-Fe/LiHV/ULiHV cells or 2- 24 V lead-acid batteries
  • Adjustable charging current (0.2 A - 20.0 A) at each channel (max. 100 W with mains power, max. 500 W with car battery or powerful stabilized power supply)
  • Adjustable discharge current 0.2 A - 1.5 A at each channel
  • Max. power for charging 1x 800W in parallel charging mode
  • Max. discharge power 2x 15 W, max. 1x 30 W in parallel discharge mode 
  • Charge termination with delta-peak automation for NiCd and NiMH batteries
  • Lithium and Pb batteries are charged using the "constant current/constant voltage" method
  • Adjustable delta-peak detection sensitivity for NiCd and NiMH batteries 
  • Adjustable end-voltage for charging and discharging of lithium and lead-acid batteries 
  • Three modes for lithium batteries - charge, discharge and storage charge/discharge; all with or without a balancer. Plus a disposal discharge mode to safely discharge a discarded battery before it is sent for recycling
  • Channel CH1 can operate as a stabilized power supply with adjustable voltage 2-30 and current 1.0-5.0 A
  • Easy firmware update via USB-C port
  • Backlit colour LCD display with simple and clear menu and parameter display during charging/discharging
  • Programming buttons for easy and clear setting and control of the charger
  • A number of warning messages contribute to safe operation - incorrect input voltage, incorrect wiring, unsuitable battery or its condition, incorrect polarity at the output, etc.
  • Forced cooling fan
  • Small dimensions
Specifications:
Input voltage (car battery - DC) [V] 10 - 30
Input voltage (mains - AC) [V] 100 - 240
Charging current [A] 0.2 - 20
Charging power (mains supply) [W] 100
Charging power (DC car battery supply) [W] 500
Discharge current [A] 0.2 - 1.5
Discharge power [W] 15
Channels 2
NiCd [cells] 1 - 16
NiMH [cells] 1 - 16
Li-Pol [cells] 1 - 6
Li-Ion [cells] 1 - 6
Li-Fe [cells] 1 - 6
Li-HV [cells] 1 - 6
Pb [cells] 1 - 12
Balancer Yes
Balancer current [A] 1.5
Length [mm] 142
Width [mm] 135
Height [mm] 64
Weight [g] 700

 

The charger is equipped with XT60 output sockets in both channels and universal sockets for JST-XH balancer connectors, allowing direct connection of battery power cables and JST-XH balancer connectors of sets 2-6S - if you use sets with XT60 and JST-XH connectors, you can do without charging cables and adapters. You can use standard Sky RC or RC System adapters to connect balancer connectors from other systems.

Kavan XT60 Charging Cable Dean-T

Snel bekijken

(0)
Niet op voorraad
Kavan XT60 Charging Cable Dean-T

Kavan XT60 Charging Cable Dean-T

(0)
€ 5,95

XT90 Charging cable for Dean-T batteries, length 25cm, 14AWG.

Kavan XT60 Charging Cable Tamiya Gold

Snel bekijken

(0)
Niet op voorraad
Kavan XT60 Charging Cable Tamiya Gold

Kavan XT60 Charging Cable Tamiya Gold

(0)
€ 5,95

Charging cabel XT60 - Tamiya Gold - Lenght 200mm, 14AWG.

Konect 3S Battery 40cm Balance Charge Cable T-Plug

Snel bekijken

(0)
Op voorraad
Konect 3S Battery 40cm Balance Charge Cable T-Plug

Konect 3S Battery 40cm Balance Charge Cable T-Plug

(0)
€ 14,95

Konect 3S Battery 40cm Balance Charge Cable T-Plug

Konect 4S Battery 40cm Balance Charge Cable T-Plug

Snel bekijken

(0)
Op voorraad
Konect 4S Battery 40cm Balance Charge Cable T-Plug

Konect 4S Battery 40cm Balance Charge Cable T-Plug

(0)
€ 14,95

Konect 4S Battery 40cm Balance Charge Cable T-Plug

LAADKABEL 2S 60CM 4MM-4/5MM

Snel bekijken

(0)
Op voorraad
LAADKABEL 2S 60CM 4MM-4/5MM

LAADKABEL 2S 60CM 4MM-4/5MM

(0)
€ 14,99

LAADKABEL 2S 60CM LANG 4MM GOLDPLUG NAAR 4/5MM GOLDPLUG

LAADKABEL 2S XT60 LANG

Snel bekijken

(0)
Op voorraad
LAADKABEL 2S XT60 LANG

LAADKABEL 2S XT60 LANG

(0)
€ 14,99

LAADKABEL 2S 60CM XT60 NAAR 4/5MM GOLDPLUG

LAADKABEL 4MMPLUG 24CM MMC

Snel bekijken

(0)
Op voorraad
LAADKABEL 4MMPLUG 24CM MMC

LAADKABEL 4MMPLUG 24CM MMC

(0)
€ 7,50

LAADKABEL 4MM GOLD PLUG.
24CM LANG.

LAADKABEL BEC

Snel bekijken

LAADKABEL BEC

€ 5,00
(0)
Niet op voorraad
LAADKABEL BEC

LAADKABEL BEC

(0)
€ 5,00

LAADKABEL BEC

Laadkabel XT-60 2,5qmm²

Snel bekijken

(0)
Niet op voorraad
Laadkabel XT-60 2,5qmm²

Laadkabel XT-60 2,5qmm²

(0)
€ 6,95

Laadkabel XT-60 2,5qmm²

Arikelnummer: 810037

LRP 2S-CHARGING LEAD - 60CM - XT60, XH TO 4/5MM, 2MM

Snel bekijken

(0)
Niet op voorraad
LRP 2S-CHARGING LEAD - 60CM - XT60, XH TO 4/5MM, 2MM

LRP 2S-CHARGING LEAD - 60CM - XT60, XH TO 4/5MM, 2MM

(0)
€ 14,95

LRP 2S-CHARGING LEAD - 60CM - XT60, XH TO 4/5MM, 2MM

LRP Double-charging lead - 4mm/5mm 2S LiPo Hardcase incl. XH

Snel bekijken

(0)
Op voorraad
LRP Double-charging lead - 4mm/5mm 2S LiPo Hardcase incl. XH

LRP Double-charging lead - 4mm/5mm 2S LiPo Hardcase incl. XH

(0)
€ 14,99

LRP Double-charging lead - 4mm/5mm 2S LiPo Hardcase incl. XH

LRP LiPo Safe Charging Bag, 23 x 30 cm replaces 65845

Snel bekijken

(0)
Op voorraad
LRP LiPo Safe Charging Bag, 23 x 30 cm replaces 65845

LRP LiPo Safe Charging Bag, 23 x 30 cm replaces 65845

(0)
€ 13,95

LRP LiPo Safe Charging Bag, 23 x 30 cm replaces 65845

LRP universal charging lead - Futaba rx / tx plug

Snel bekijken

(0)
Niet op voorraad
LRP universal charging lead - Futaba rx / tx plug

LRP universal charging lead - Futaba rx / tx plug

(0)
€ 5,95

LRP universal charging lead - Futaba rx / tx plug

LRP universal charging lead - Sanwa / Graupner / JR - rx / t

Snel bekijken

(0)
Niet op voorraad
LRP universal charging lead - Sanwa / Graupner / JR - rx / t

LRP universal charging lead - Sanwa / Graupner / JR - rx / t

(0)
€ 5,95

LRP universal charging lead - Sanwa / Graupner / JR - rx / t

MMC-LAADKABEL XT60/TRX 1070

Snel bekijken

(0)
Niet op voorraad
MMC-LAADKABEL XT60/TRX 1070

MMC-LAADKABEL XT60/TRX 1070

(0)
€ 8,50

MARCO'S MODEL CARS LAADKABEL VAN XT60 NAAR TRAXXAS.

NiMH Starter Set 3000 ABSIMA

Snel bekijken

(0)
Op voorraad
NiMH Starter Set 3000 ABSIMA

NiMH Starter Set 3000 ABSIMA

(0)
€ 39,95

This starter set is the ideal carefree package for getting started in the RC hobby. NiMH batteries are very robust and resistant and are ideal for BRUSHED RC cars. Thanks to the user-friendly operation (plug and play), this set is also perfect for beginners.
 
Charger specification:
 
Charging current: 800mAh
Operating voltage: 100-240V
Battery type: NiMH 1-9 cells / 1.2V-10.8V
Power supply type: integrated power supply
Charging control: Status LEDs (red/green)
Delta peak switch-off
Dimensions (L/W/H): 100x61x30mm 
Weight: 100g
 
Battery specification:
 
Suitable for 1:10 RC cars (almost all types)
Battery type: NiMH
Capacity: 3000mAh
Voltage: 6 cells / 7.2V
Power cable/plug: 12AWG silicone cable/Tamiya plug
Dimmensions (L/W/H): 135x46x25mm
Weight: +/- 325g
 
Scope of delivery:
 
1* NC-1 charger
1* NiMH Racing Pack 3000mAh
1* Adapter T-plug/Tamiya

Ray Tronic C30 Plus DC 300W Balanced Charger

Snel bekijken

(6)
Op voorraad
Ray Tronic C30 Plus DC 300W Balanced Charger

Ray Tronic C30 Plus DC 300W Balanced Charger

(6)
€ 39,99

The Raytronic C30 + 300W was designed to offer an intelligent pocket charger with high performance and very simple operation. RAYTRONIC C30 + allows charging and discharging common types of cells (NiCd, NiMH, LiPo, LiHV Li-ion, LiFe, Pb), in addition it is equipped with a built-in six-channel balancer, which ensures safe and comfortable charging of lithium batteries. Measurement of voltage and internal resistance of individual cells (for lithium batteries) is a matter of course.

Features:
  • Input supply voltage 10 - 26 V DC (socket XT60)
  • For charging and discharging 1 - 16 NiCd / NiMH cells, 1 - 6 Li-ion / LiPo / LiHV / LiFe cells or 2- 20 V lead-acid batteries
  • Adjustable charging current (0.1 A - 12.0 A)
  • Adjustable discharge current (0.1 A - 3.0 A)
  • Max. power for charging 300 W, for discharging 5 W
  • Termination of charging using delta-peak automation for NiCd and NiMH batteries
  • Lithium and Pb batteries are charged using the "constant current / constant voltage" method
  • Adjustable delta-peak detection sensitivity for NiCd and NiMH batteries
  • Adjustable end voltage for charging and discharging for lithium batteries
  • Repeated cyclic operation of charging / discharging or discharging / charging for NiCd and NiMH batteries, up to 5 cycles
  • Four charging modes for lithium batteries - normal charging, fast charging, balancing charging and storage charging / discharging
  • Stop charging when the set time or the supplied charge is exceeded.
  • Memory for 5 charging / discharging programs.
  • Measurement of the total voltage of the set and individual cells (for lithium batteries)
  • Measurement of the total internal resistance of the set and individual cells (for lithium batteries)
  • The XT60 power output socket and the JST-XH 2-6S universal balancer socket allow you to connect the rechargeable battery directly without the need for a charging cable and balancer adapter (if the kit is equipped with an XT60 power connector and a JST-XH service connector)
  • Two-line backlit LCD display with simple and clear menu and display of parameters during charging / discharging
  • A number of warning text messages contribute to safe operation - incorrect input voltage, incorrect connection, unsuitable battery or its condition, incorrect polarity at the output
  • Reverse polarity and short circuit protection at the output / li>
  • Compact plastic case, small dimensions
  • Built-in fan for forced cooling
Specifications:
Input voltage [V] 10 - 26
Charging current [A] 0.1 - 12
Discharge current [A] 0.1 - 3
Number of channels 1
NiCd 1 - 16
NiMH 1 - 16
Li-Pol 1 - 6
Li-Ion 1 - 6
Li-Fe 1 - 6
Li-HV 1 - 6
Pb 1 - 10
Balancer Yes
Charging power [W] 300
Discharge power [W] 5
Balancer current [A] 1
Length [mm] 87.5
Width [mm] 48.5
Height [mm] 30
Weight [g] 95

RAY Tronic C50 DC 500W Balanced Charger

Snel bekijken

(0)
Niet op voorraad
RAY Tronic C50 DC 500W Balanced Charger

RAY Tronic C50 DC 500W Balanced Charger

(0)
€ 74,99

Small two-channel charger Raytronic C50 2×250W was designed with an effort to offer a smart charger with high power and simple and intuitive operation. Raytronic C50 allows to charge and discharge common types of batteries (NiCD, NiMH, LiPo, LiFe, LiHV, Li-Ion, Pb), and is also equipped with 6-channel balancers, which provide safe charging of lithium batteries. The charger has a coloured LCD display and programming button and vial, which will provide you with the possibility of comfortable and very clear parameter settings, control, and watching charging/discharging progress.

Besides compact "handful" dimensions and intuitive controls, the following is worth mentioning:
  • Program for new types of "High voltage" lithium (LiHV) batteries with an output charging voltage up to 4,25V
  • Powerful balancer with current up to 800 mA
  • Optional synchronised operation of both channeůs for charging a single battery with power up to 500 W
  • Optional recuperative discharging with high power when charging from a car battery (energy consumed by your charger is used to charge the car battery powering the charger again
  • Adjustable output voltage for charging and discharging lithium batteries (allows more gentle charging, as liked by pilots, or, conversely, brutal discharging loved by RC car enthusiasts).
  • Programs for charging intelligent batteries for popular DJI drones.
Features:
  • Input: 7.28V DC (XT60 connector)
  • For charging/discharging 1–16cell NiCd/NiMH, 1–6cell Li-Ion/LiPo/LiFe/LiHV or 2–20V Pb batteries
  • Adjustable charging current (0.1–15.0 A) for each channel
  • Adjustable discharging current (0.1–3.0 A), or recuperative discharging (0.1–15.0 A) for each channel
  • Charging power output up to 2x250W/1x500W for synchronous charging
  • Discharging power output up to 2x12W, up to 2x250W for recuperative discharging
  • Charging finishing via automatic "Delta-Peak" for NiCd and NiMH batteries
  • Lithium and Pb batteries are charged via the "constant current/constant voltage" method
  • Adjustable sensitivity of "Delta-Peak" detection for NiCd/NiMH batteries
  • Adjustable output voltage for charging and discharging the lithium batteries
  • Repeated cyclic charging/discharging or discharging/charging operation for NiCd and NiMH batteries, up to 12 cycles
  • 3 lithium battery modes - charging, discharging and charging/discharging for storing. All of this with a balancer or without it.
  • Finishing of charging after reaching a set time, temperature or supplied charge
  • Memory for any amount of charging/discharging programs
  • Internal resistance measuring of individual cells
  • Stabilised DC current source (0.1–15.0 A) with an adjustable voltage limit
  • Charging programs for intelligent DJI Mavic/Phantom/Inspire batteries
  • Ports for temperature sensor (sold separately)
  • USB input (5V/2.1A) for smartphone/tablets/etc. charging
  • Simple firmware update via USB port
  • Backlit coloured LCD display with simple and well-arranged menu, parameter overview during charging/discharging
  • Programming button and vial for simple and intuitive setting and controlling the charger
  • Warning messages for higher safety - incorrect input voltage, incorrect connection, unsuitable battery or its condition, incorrect polarity etc...
  • Incorrect polarity and on-input short-circuit protection
  • Forced-cooling fan
  • Compact plastic body, very small dimensions

Charger's both channels are equipped with an output XT60 ports and universal ports for service connectors JST-XH, allowing direct connection of battery power cables and service connectors JST-XH for 2–6S packs. If you are using a pack with XT60 and JST-XH connects, you don't need any additional adaptors and cables. To connect service connectors of other systems you can use standard Sky RC or RC System adaptors.

Note: charger uses output voltage of 2.4V/cell for Pb battery charging - for this reason, it is suitable for charging typical lead-acid batteries (car batteries) and gel batteries with reversible valve. NOT SUITABLE for charging gas-tight gel batteries charged with a maximum of 2.3V/cell.

Specifications:
Input Voltage (DC) [V] 7 - 28
Charging Current [A] 0.1 - 15
Charging Power [W] 250
Discharging Current [A] 0.1 - 3
Discharging Power [W] 12
Discharging Current (with recuperation) [A] 15
Discharging power (with recuperation) [W] 250
Channels 2
NiCd [cells] 1 - 16
NiMH [cells] 1 - 16
Li-Pol [cells] 1 - 6
Li-Ion [cells] 1 - 6
Li-Fe [cells] 1 - 6
Li-HV [cells] 1 - 6
Pb [cells] 1 - 10
Balancer Ano
Balancer Current [mA] 800
Length [mm] 98
Width [mm] 68
Height [mm] 35
Weight [g] 220

  1  2  3 4 5  


Laatst bekeken producten

Deze website gebruikt cookies om het bezoek te meten, we slaan geen persoonlijke gegevens op.