PROTOform Elite-TC Pre-Cut Wing Kit for 190mm TC - 1724-17

PROTOform is excited to bring our first-ever body dedicated to front wheel drive touring cars: meet the Europa.

Europa takes styling cues from popular European hot hatches competing in full-scale TCR classes around the globe. With aggressive fender flares and a slammed hatchback roofline, the Europa is bound to make a statement at your track. At the rear of the body, molded in wing platforms support the add-on nylon wing struts and wing to complete the super scale look. Designed and produced using the latest in 3D CAD and 5-axis CNC technology, Europa’s detailing, symmetry and overall quality of surfaces is second-to-none.

This body will fit any popular 190mm touring car chassis. It’s produced in our high-quality, lightweight polycarbonate for a low center of gravity, and includes a detailed decal sheet with windshield header and number plates, window masks, and paint-then-peel overspray film.
 

After the success of the Europa for 190mm FWD touring cars, PROTOform is excited to bring a scaled-down version to the ever-popular M-Chassis: meet the Europa M.

Europa M takes styling cues from popular European hot hatches competing in full-scale TCR classes around the globe. With aggressive fender flares and a slammed hatchback roofline, the Europa is bound to make a statement at your track. At the rear of the body, molded in wing platforms support the add-on nylon wing struts and wing to complete the super scale look. Designed and produced using the latest in 3D CAD and 5-axis CNC technology, Europa’s detailing, symmetry and overall quality of surfaces are second-to-none.

This body will fit M-chassis in both 210mm and 225mm wheelbases. Marked inside each wheel well are center points to trim your wheel openings. Just use the included wheel well tracing templates, lining them up on the "+" markings for 225 or "x" markings for 210mm.

The Europa M is produced in our high-quality, lightweight polycarbonate for a low center of gravity, and includes a detailed decal sheet with windshield header and number plates, window masks, and paint-then-peel overspray film.

Please note: All bodies are sold in crystal clear polycarbonate and are painted for advertising purposes only. Extended body posts may be needed in order to mount this body.

PROTOform F1 Rear Wing (White) for 1:10 Formula 1 - 1723-04

PROTOform is proud to release our first wing set for 1:10 Formula 1 cars, one of the fastest growing segments of on-road RC racing.

There were three main ingredients the team at PROTOform took into consideration when designing these wings: 1) look awesome, 2) be durable and 3) perform excellently on the track.

Starting with the aesthetics, the wings come with a sleek matte finish in your choice of white or black colors. Inspired by real F1 wing styling, this wing will give your 1:10 Formula 1 car an unmistakable look on the track. The rear wing is a true multi-element design featuring slots in the side dams, just like the 1:1 cars. The middle element features an emblazoned PF icon. Rear downforce can be tuned by removing either of the upper elements, creating a “Monza-style” setup for high speed tracks. There are also three different mounting positions on the plate to adjust the height of the wing if your chassis does not have this feature. This wing set will fit most popular F1 cars on the market such as Xray, Tamiya, Yokomo and Roche.

PROTOform F1 Rear Wing for 1:10 Formula 1 - 1723-00

PROTOFORM F1-Fifteen Clear Body - 1545-30

PROTOFORM F1-Thirteen Clear Body for F1 - 1537-30

PROTOFORM F26 Clear Body for 1:10 Formula 1 - 1561-22

PROTOFORM LTCR Light Weight Clear Body for 190mm - 1505-25

The PFM-10 is produced in genuine .030” lexan® and includes a comprehensive decal sheet, injection-molded wing struts, wing mounting hardware, and paint-then-peel overspray film. Please note: All bodies are sold in crystal clear lexan® and are painted for advertising purposes only.

PROTOFORM Pre-Cut TC Wing Endplates (10 pack) - 1727-00

PROTOFORM Strakka-12 Light Weight Clear Body for 1:12 On-Road Car - 1614-20

PROTOFORM Strakka-12 PRO-Light Weight Clear Body for 1:12 On-Road Car - 1614-15

PROTOform TC Wing Mount Set (Black) - 1730-03

Protoform TS18 Pre-cut Wing Kit for 190mm - 1728-17

The TS18 wing takes its design from the Type-S race body, but adds extra thickness. The medium weight polycarbonate provides a neutral feeling for your 190mm touring car, great for almost any track surface. Conveniently pre-cut, the TS18 also includes pre-cut 40mm x 20mm endplates, double-sided tape, and mounting hardware.

TURISMO LITE WEIGHT BODYSHELL 190MM (CLEAR)

PROTOform V2 F1 Front Wing (Black) for 1:10 Formula 1 - 1729-04

Introducing our next-generation front wing for your 1:10 F1 car, designed for versatility, drivability and unmistakable style.

The V2 F1 Front Wing features 3-way adjustability to suit any condition your track throws at you: a low-downforce option, a medium downforce with 1-element add-on winglet, or a high-downforce, 2-element add-on winglet for maximum steering feel. The tall wing endplates enhance straight-line stability and side-bite in long sweepers. Inspired by popular American open-wheel cars from the late 90s, we also incorporated additional ground clearance at the outer extremities, especially important on U.S. style high-grip carpet. A wide, flat section in the middle of the wing provides a perfect mating surface for any F1 body.

The wings are made from sleek, matte-finished, ultra-durable nylon and will fit most popular F1 cars on the market such as Xray, AE, Tamiya and Roche. They are available in Black color now, with a white option coming soon.

PROTOform V2 F1 Front Wing (White) for 1:10 Formula 1 - 1729-04

Introducing our next-generation front wing for your 1:10 F1 car, designed for versatility, drivability and unmistakable style.

The V2 F1 Front Wing features 3-way adjustability to suit any condition your track throws at you: a low-downforce option, a medium downforce with 1-element add-on winglet, or a high-downforce, 2-element add-on winglet for maximum steering feel. The tall wing endplates enhance straight-line stability and side-bite in long sweepers. Inspired by popular American open-wheel cars from the late 90s, we also incorporated additional ground clearance at the outer extremities, especially important on U.S. style high-grip carpet. A wide, flat section in the middle of the wing provides a perfect mating surface for any F1 body.

The wings are made from sleek, matte-finished, ultra-durable nylon and will fit most popular F1 cars on the market such as Xray, AE, Tamiya and Roche. They are available in Black color now, with a white option coming soon.