Er zijn nog geen producten in uw winkelwagen geplaatst.
NIEUW
Â
16 / 67
Bezig met laden...
Iris ONE.05 FWD Competition Touring Car Kit (Carbon Chassis)
€ 599,99
€ 555,00
The Iris ONE.05 FWD touring car is based on the ONE.05 touring car, the second generation competition car kit designed and developed entirely by RUDDOG. It features a forward mounted motor and battery for optimised weight balance and performance. The central single belt drive has a machined aluminium pulley and is highly efficient for the low power 17.5T and 21.5T motors. It also has FWD-specific steering geometry to meet the needs of the FWD class, while still sharing the majority of components with the Iris ONE.05 touring car for easy and simple parts management.
It now has an updated and optimised shock linkage and a carbon fibre rocker arm that reduces roll when cornering. New chassis locating pins on the bulkheads, motor mount and damper cases not only improve durability, but have also allowed us to redesign these parts and make them lighter, saving over 25g in total.
Many unique details, such as an optional direct mount aluminium fan, have been incorporated into the design of the Iris ONE.05 to give you an edge over the competition.
FWD features:
· Forward mounted motor and battery, for perfect weight distribution
· Aluminium belt pulley
· Centralised single belt drive
· FWD-specific adjustable steering system
· Included front centre steel weights
· Carbon Chassis
New ONE.05 features:
· Updated shock linkage geometry: for less roll and higher corner speed
· Chassis pin locators on bulkheads, motor mount and damper housings
· New lightweight upper and lower bulkheads, motor mount and damper cases
· Over 25g lighter than the Iris ONE
· Improved V2 differential and shock seals
· Reduced chassis front overhang, with carbon front bumper mount
· Optional redesigned heave shock
Legacy features:
· Unique torsion spring design
· Single lever rotational shocks
· Pushrod suspension
· Double wishbone design; identical arms on all four corners
· Ultra narrow bulkhead design
· Steering assembly with easily adjustable Ackermann geometry
· Adjustable track width with inserts
· Sturdy and fully adjustable suspension
· Optional direct-mount aluminium high-speed fan
Due to ongoing R&D, photos may not match the final kit. The shown vehicle is equipped with battery, electronics, wheels, pinion, spur gear and servo arm that are NOT included in the kit.
We recommend follow spur gears (There is no spur gear included in the kit):
IRIS-31000 | Iris Machined Spur Gear 90T 64dp
IRIS-31001 | Iris Machined Spur Gear 100T 64dp
IRIS-31002 | Iris Machined Spur Gear 110T 64dp
Internal Gear Ratio: 1.9
Iris ONE.05 Competition Touring Car Kit (Carbon Chassis)
€ 699,99
€ 655,00
The Iris ONE.05 touring car is the second generation competition car kit, designed and developed entirely by RUDDOG. Based on feedback from customers and team drivers, we have improved several areas of the original Iris ONE. While the ONE.05 is still based on the same concept as the ONE and uses most of the same drivetrain and plastic parts, it features several improvements to make the car faster and more durable.
It now has an updated and optimised shock linkage and a carbon fibre rocker arm that reduces roll when cornering. New chassis locating pins on the bulkheads, motor mount and damper cases not only improve durability, but have also allowed us to redesign these parts and make them lighter, saving over 25g in total.
It still features an ultra-narrow bulkhead design and the efficient three-belt design for perfect weight balance and less belt tension compared to a two-belt design.
Many unique details, such as an optional direct mount aluminium fan, have been incorporated into the design of the Iris ONE.05 to give you an edge over the competition.
New features:
· Updated shock linkage geometry: for less roll and higher corner speed
· Chassis pin locators on bulkheads, motor mount and damper housings
· New lightweight upper and lower bulkheads, motor mount and damper cases
· Over 25g lighter than the Iris ONE
· Improved V2 differential and shock seals
· Reduced chassis front overhang, with carbon front bumper mount
· Redesigned motor mount, for improved spur gear alignment
· Carbon Chassis
· Optional redesigned heave shock
Legacy features:
· Unique torsion spring design
· Single lever rotational shocks
· Pushrod suspension
· Double wishbone design; identical arms on all four corners
· Efficient low friction three-belt drive train
· Ultra narrow bulkhead design
· Steering assembly with easily adjustable Ackermann geometry
· Adjustable track width with inserts
· Sturdy and fully adjustable suspension
· Optional direct-mount aluminium high-speed fan
Due to ongoing R&D, photos may not match the final kit. The shown vehicle is equipped with battery, electronics, wheels, pinion, spur gear and servo arm that are NOT included in the kit.
Iris ONE Rear Chassis Weight 18g
€ 19,95
Fine-tune your Iris ONE with the Iris ONE Rear Chassis Weight. This specially designed additional weight is conceived to weight down the rear of your chassis, enhancing traction and stability during demanding driving conditions. Weighing 18g, it integrates seamlessly into the Iris ONE chassis, ensuring the perfect balance and handling of your vehicle.
Features:
- Weight: 18g, ideal for balancing the rear end
- Specifically designed for the Iris ONE
Iris ONE One-Piece Topdeck 2.0mm
€ 34,95
The Iris ONE One-Piece Topdeck 2.0mm for the ONE and ONE.05 touring car is another tuning part that provides an additional setup option that makes driving easier and more predictable, whether it's on an asphalt or carpet race track. It stiffens the car especially in the area of the motor mount, making it a bit stiffer overall.
Iris ONE Motor Mount Weight 13g
€ 13,95
The Iris ONE Motor Mount Weight 13g is a specially designed additional weight for the Iris ONE touring car. Weighing in at 13 grams and centrally positioned within the vehicle, it minimally impacts the weight ratio, ensuring it doesn't negatively affect performance and handling characteristics.
Product Features:
- Central Positioning: The weight is mounted very centrally in the car, thereby having only a minor influence on the weight ratio.
- Easy Installation: It is secured to the motor mount using two countersunk screws included in the package.
- Quality Material: The weight is made and laser-cut from steel.
- Marking: The weight features a "13g" marking, enabling easy identification.
With the Iris ONE Motor Mount Weight, you can optimally set up your vehicle for various racing conditions without negatively impacting the car's balance.
Revolution Design Ultra 1/8 Fan Mount Kit for 30mm and 40mm Fan
€ 14,95
Maximize your 1/8 Brushless engine's cooling with the Revolution Design Ultra 1/8 Fan Mount Kit. Specially tailored for engines with a 40mm diameter, this mounting kit offers flexible and efficient adaptation. Compatible with both 30mm and 40mm fans, it grants the liberty to select the fan best suited to your needs. With its sturdy design and straightforward assembly, it's the ideal upgrade to enhance your engine's performance and lifespan.
Features:
- Compatible with 1/8 Brushless engines of 40mm diameter
- Supports both 30mm and 40mm fans for utmost flexibility
- Robust construction ensuring lasting durability
- Easy assembly and dependable Fixation.
RUDDOG Pit Towel 100x70cm
€ 12,50
The RUDDOG Pit Towel offers a practical alternative or complement to popular pit mats. It is perfect for catching overflowing damper oil and safely holding dropped differential balls or screws that might otherwise be lost in the pit area. Measuring 100 cm x 70 cm, the towel fits perfectly on a standard pit space and can be easily folded if needed. Folded up, it fits even where accommodating a sturdier mat might be challenging.
The pit towel in the classic RUDDOG colors is an attractive option for model builders on a limited budget or as a small gift, thanks to its affordable price. Made from 80% polyester and 20% polyamide, the towel is durable and easy to clean.
Features:
- Practical pit towel in classic RUDDOG colors
- Ideal as an alternative or complement to pit mats
- Dimensions: 100 cm x 70 cm
- Foldable and space-saving
- Material: 80% polyester, 20% polyamide
- Budget-friendly solution for model builders and as a gift
Iris ONE Rear Steering Arm Carbon Fiber (2pcs)
€ 10,50
Iris ONE Rear Steering Arm Carbon Fiber (2pcs)
Iris 6.5x3.75mm Suspension Ballstud +1.5mm Neck - Titanium (2pcs)
€ 9,95
The Iris 6.5x3.75mm Suspension Ballstud +1.5mm Neck - Titanium are an easy way to adjust the hub height and thus the roll center of the Iris ONE. They are made from titanium, making them significantly lighter than the steel version. The thread height has also been lengthened to provide even further adjustability. They are an essential tuning part to optimally adapt the handling of your Iris ONE to the respective track.
Product Features:
- Made from titanium, significantly lighter than the steel version
- Allows adjustment of the hub height
- Extended thread height for additional adjustability
- Ideal for fine-tuning the handling of your Iris ONE
Iris 6.5x3.75mm Suspension Ballstud +1.5mm Neck (4pcs)
€ 10,95
The Iris 6.5x3.75mm Suspension Ballstud +1.5mm Neck are an easy way to adjust the hub height and thus the roll center of the Iris ONE. The thread height has also been lengthened to provide even further adjustability. They are an essential tuning part to optimally adapt the handling of your Iris ONE to the respective track.
Product Features:
- Allows adjustment of the hub height
- Extended thread height for additional adjustability
- Ideal for fine-tuning the handling of your Iris ONE
Iris 6.5x3.5mm Suspension Ballstud - Titanium (2pcs)
€ 8,50
Make it light! Lower the overall weight and improve the center-of-gravity of your Iris ONE with the titanium ballstuds from Iris. The ballstuds are made of high-grade Ti6Al4V Grade 5 and shave off a whopping 43% in weight compared to the Standard steel ballstuds.
- Machined from Ti6Al4V Grade 5
- Over 40% lighter than steel bullstuds
- 2pcs per pack
Iris 5x4mm Ballstud - Titanium (2pcs)
€ 8,50
Make it light! Lower the overall weight and improve the center-of-gravity of your Iris ONE with the titanium ballstuds from Iris. The ballstuds are made of high-grade Ti6Al4V Grade 5 and shave off a whopping 43% in weight compared to the Standard steel ballstuds.
- Machined from Ti6Al4V Grade 5
- Over 40% lighter than steel bullstuds
- 2pcs per pack
Iris 5x2.5mm Ballstud - Titanium (2pcs)
€ 8,50
Make it light! Lower the overall weight and improve the center-of-gravity of your Iris ONE with the titanium ballstuds from Iris. The ballstuds are made of high-grade Ti6Al4V Grade 5 and shave off a whopping 43% in weight compared to the Standard steel ballstuds.
- Machined from Ti6Al4V Grade 5
- Over 40% lighter than steel bullstuds
- 2pcs per pack
Iris 5mm Ball Connector - Titanium (2pcs)
€ 8,50
Make it light! Lower the overall weight and improve the center-of-gravity of your Iris ONE with the titanium ballstuds from Iris. The ballstuds are made of high-grade Ti6Al4V Grade 5 and shave off a whopping 43% in weight compared to the Standard steel ballstuds.
- Machined from Ti6Al4V Grade 5
- Over 40% lighter than steel bullstuds
- 2pcs per pack
Iris 5.5x10mm Suspension Ballstud - Titanium (2pcs)
€ 8,50
Make it light! Lower the overall weight and improve the center-of-gravity of your Iris ONE with the titanium ballstuds from Iris. The ballstuds are made of high-grade Ti6Al4V Grade 5 and shave off a whopping 43% in weight compared to the Standard steel ballstuds.
- Machined from Ti6Al4V Grade 5
- Over 40% lighter than steel bullstuds
- 2pcs per pack
Â