Er zijn nog geen producten in uw winkelwagen geplaatst.
Overige Merken
13 / 39
Bezig met laden...
CORERC DOUBLE SIDED TAPE - 3 MTRS - CR750
€ 7,95
Widely regarded as the best type of tape in the industry. Easily adheres electrics to chassis, this clear tape is now available from CORE RC.
Relatively large roll at 3 metres in length but still suitable to fit in your tool bag with ease.
Sticks extremely well and peels off in one piece with no residue.
3m roll.
25mm width.
55mm diameter when new.
Approx 1mm thick.
Dry PTFE Chain Lube 400ml
€ 11,95
MOF949
Muc-Off Dry PTFE Chain Lube is a highly versatile, dry weather chain lube. Our advanced ‘Dry Formula’ creates a clean, durable and protective chain wax layer that inhibits rust development and chain link corrosion. The added PTFE creates exceptionally low surface friction .
DRY-FLUID EXTREME RC CAR - 20ML
€ 19,95
HIGH END SLIDE-LUBRICANT FOR LINKS, SHAFTS AND BEARINGS
BALSAM FOR RC CARS
DryFluid Extreme was specially developed for radio controlled model cars with the aim to preserve as long as possible or rather to extend significantly the efficiency and lifetime of these mechanical marvels.
The effect of this new lubricant for links, shafts and bearings begins where others show their limits. Lowest sliding friction, maximum speed and minimal dust and dirt binding were the main objectives of the development. Findings in the aviation and vehicle industries and the expert knowledge of RC car pilots are the driving forces behind this new lubricant.
SLIDE-LUBRICANT INSTEAD OF OIL
DryFLuid is a dry slide-lubricant rather than a classic oil or grease. DryFluid is not wax, it is neither greasy nor oily but is silicone-free. A long-lasting lubrication effect is achieved using dry particles, sliding polymers and high end sliding fluids. The application and long-term effects of DryFluid Extreme will inspire every RC pilot.
PRODUCT-FEATURES
Reduction of power loss on links, shafts and bearings and it guarantees a long life of the treated components.
Lowest sliding friction for free movement and wear reduction
Multistage lubricant system with immediate and long-term effects
Dust and dirt repellent
Extremely good creeping abilities
Excellent material compatibility with all current metal, plastic and natural rubber materials Outstanding adhesive and anti-corrosive properties
This is classed as a hazardous material by our shippers and consequently cannot be sent outside the UK by air transport.
Within the UK it can only be sent by UPS not post. Please only select UPS for the shipping method at the checkout.
ECLIPSE 5 - 1/12TH CIRCUIT - KIT
€ 349,99
The Schumacher Eclipse cars are the current reigning 1/12th scale IFMAR World and EFRA European Champions in both modified and stock classes.
The New Eclipse 5 features an extensive list of refinements, making it even faster and better handling.
The Eclipse 5 is the ultimate professional LMP12 racing chassis kit. The choice of champions!
- NEW - Alloy chassis design with a much shorter overall length. This allows for reduced chassis scrubbing along with a significant weight reduction from beyond both front and rear axles. These benefits allow the car to enter a corner more effortlessly and when in the corner, rotation is achieved more freely.
- NEW - Upgraded left and right rear hex wheel clamps to prevent any wheel wobble issues. Now perfectly true running wheels with our unique single nut rear wheels/solid axle!
- NEW - Servo mounting has been improved, resulting in direct mounting for the Sanwa micro range of servos such as the PGS-HR and SRG-HR. Direct and easy alignment onto the centre of the car. In doing this the chassis flexibility characteristics have been vastly improved, for performance and strength, by removing the large, off centre transverse slots previously used. All other brands of servo still can be used with the ultra-lightweight floating servo mount, included.
- NEW - Lightweight and flexible 3D printed rubber bumper, offering perfect body shell protection. Compared to the previous foam bumper, it is also very durable and long lasting.
- NEW - Black aluminium steering turnbuckles now included. Stealth and lighter weight.
- NEW - Updated top decks design, further reducing the polar moment of inertia. They now secure at the front within the wheelbase.
- NEW - The front lower beam has been improved, mounting in line with the front axle, and further reducing this forward weight, allowing for the reduced chassis length. The new beam makes use of super easy, slide in, speed secret ride height spacers. 0.5mm U7920 and 0.75mm U7921.
- NEW - Independent and lightweight front bumper mount makes front end assembly far easier. The front bumper can now be removed with only 2 screws.
- NEW - Moulded lighter weight front hub carrier design with much improved suspension action and damping characteristics. Un-sprung mass has also been reduced.
- NEW - Tweak free and easy LiPo mounting using new lighter weight O-ring fixing.
- NEW - Interchangeable front LiPo position stops with 4 equally spaced settings included.
- NEW - Optional 1.0° camber strap available. 1.5° camber is included in the kit for maximum steering and lap time in most conditions.
- NEW - Pod offset has been refined to achieve the perfect pod balance with a wider range of modern motors.
- NEW - Lightweight pod carbon parts for lower centre of gravity and overall car weight.
- NEW - Underside Variable Chassis chamfers, offering improved ground clearance, smoother scrubbing and better clearance to curbs or other corner markers.
Not forgetting all the usual features that have made the Eclipse IFMAR World and EFRA European Champion.
- Range of optional colour coded front springs.
- Big Bore side and centre dampers offering long lasting damping. They also give great damping oil retention (less frequent maintenance required) and a compact and central design. Damper geometry changes have improved damping characteristics.
- Lightweight pod assembly for smoother, more predictable drivability and bump handling. Strengthened for tweak prevention.
- Lightweight Low Centre of Gravity CNC Alloy Motor Mounts.
- Rear ride height adjusters, easier adjustment and 0.25mm height increments.
- Front beam socket using O-ring fixing system.
- Thread insert design making work on the car much quicker and simpler.
- Easy body shell height adjustment.
- Extra low rear roll centre pivot height for awesome rear traction.
- Centre pivot design for easy build and maintenance, with a fully bind free design.
- All black nuts as standard.
- Perfectly balanced rear pod assembly.
- Ultra-low motor position.
- Full range of colour coded rear and side springs.
- Separate springs for independent roll and bump stiffness adjustment.
- Ball bearing front and rear axles.
- Adjustable toe-in/out.
- Chassis balance pivot holes. For use with U3582 Precision Balance Pivot Set. (Available Separately) To optimise left/right weight distribution.
- Rear tweak adjustment via side springs.
- Simple rear droop adjustment.
- Small Kimbrough servo saver with stiffener included as standard.
- High tensile steel hex screws used throughout.
- High quality easy to follow instruction manual.
- Range of World Championship Winning Contact RC foam tyres available.
- Accepts a huge range of industry standard body shells, motors, LiPo’s and speed controllers.
- Suitable for USA rules GT12 racing.
|
|
Excel Double Honed Blade (5pcs)
€ 4,50
Features:
- Made from carbon steel, #11 Blades
- Available in packs of 5, 15, 100, 500, 1000
- The double honed replacement blade has a strong tip and flex so you do not have to worry about breaking their edge and tip.
- This versatile replacement blade fits with all standard light and medium duty Xacto style knives.
- Used with: cuts on paper, card-stock, stencils, film, photographs, tape, plastic, cork, wood, vinyl, cloth, leather, cardboard, foam boards and most other light-weight crafting.
- Used for: model making, paper cutting, cake decorating, Cricut vinyl cutting and polymer clay.
- Used by graphic artists, architects, car wrappers, designers, hobbyists, scrapbook artists and crafters.
- Fits with: K1, K3, K17, K18, K26, K30, & K71 handles
- L – 1.575/ H – 0.350 / E - 0.975/ S – 0.250/ T – 0.020
EXTRA LONG BODY CLIP 1/10 - FLUORESCENT RED (6)
€ 3,99
EXTRA LONG BODY CLIP 1/10 - FLUORESCENT RED (6)
EXTRA LONG BODY CLIP 1/10 - FLUORESCENT YELLOW (6)
€ 3,99
EXTRA LONG BODY CLIP 1/10 - FLUORESCENT YELLOW (6)
EXTRA LONG BODY CLIP 1/10 - METALLIC PURPLE (6)
€ 3,99