Speedmind Wheel Washer 4mm slim (2 pcs.)

Extra lichte, dunne en zelfklevende MR33 plastic schijven om je carrosseriegaten te beschermen.
De schijven zijn slechts 0,5 mm dik en hebben een binnendiameter van 5 mm.
Je kunt de gaten in de schijven naar wens vergroten met een carrosseriegatboor en ze ook gebruiken met carrosseriegaten van 6 mm en 7 mm.
Het artikel bevat 8 zelfklevende plastic schijven.

Stalen cardankoppelingen TT-01 /TT02/ DF-03Ra / TA04 / BT-01 chassis 2 stuks

Artikelnummer: 800782
EAN: 4895186201312

Goede cardanassen hebben veel voordelen ten opzichte van een normale botconstructie:
Minder wrijvingsverlies, hogere bochtsnelheid, minder trillingen, minder slijtage alleen maar voordelen!!!

Specificaties:
- Lengte: 39mm

Geschikt voor de volgende Tamiya chassis:
- DF03RA
- TA-04
- TT-01
- TT-01E
-TT02
- BT-01

Opmerking:
Bij gebruik van dit onderdeel op de TT01 / TT01E TT02 is de Tamiya (53663) Kogel differentieelset of de Tamiya (53790) Kopverbinding voor cardanas vereist.

Let op: Niet geschikt voor kinderen onder de 14 jaar. Gebruiken onder direct toezicht van volwassenen.

Leveringsomvang:
- 2 stuks stalen cardanassen TT-01 / TT02/DF-03Ra / TA04 / BT-01 chassis

Aluminium stuur blauw geschikt voor Tamiya BBX BB-01 chassis

Onderdeelnummer: 800779
EAN: 4894711056977

Verhoogt de efficiëntie en precisie van de besturing dankzij de veel lagere inherente vervorming in vergelijking met de kunststof onderdelen.
Aluminium tuningset met kogellager. Blauwe onderdelen zijn geanodiseerd.

Geschikt voor de volgende Tamiya chassis:
- BBX

Let op: Niet geschikt voor kinderen onder de 14 jaar. Gebruiken onder direct toezicht van volwassenen.

Leveringsomvang:
- 1 stuk aluminium stuur blauw geschikt voor Tamiya BBX BB-01 chassis

Aluminium Servohouder 2st voor Tamiya BBX (BB-01)

Onderdeelnummer: 800778
EAN: 4894711056083

Verhoogt de efficiëntie en precisie van de besturing dankzij de veel lagere inherente vervorming in vergelijking met de plastic onderdelen.

Geschikt voor de volgende Tamiya-chassis:
- BBX

Let op: Niet geschikt voor kinderen jonger dan 14 jaar. Gebruiken onder direct toezicht van volwassenen.

Leveringsomvang:
- 1 aluminium servohouder geschikt voor Tamiya BBX BB-01 chassis 1 set

Aluminium motorsteun (blauw) voor 16T-21T tandwiel (TA01 / TA02)

Artikelnummer: TA01-013BU / 800777
EAN: 4895186214893

Aluminium motorhouder (blauw) voor 16T tot 21T motortandwielen.
Geschikt voor de volgende Tamiya chassis:
- TA01
- TA02
- DF-01
- Top Force
- Manta Ray

Let op: Niet geschikt voor kinderen jonger dan 14 jaar. Gebruiken onder direct toezicht van volwassenen.

Leveringsomvang:
- 1 aluminium motorsteun (blauw) voor 16T-21T tandwiel (TA01 / TA02)

PGT3 Body in standard weight, supplied clear with overspay film, window masks, wing and wing mounting hardware.

GT12 SupaStox pan car body Type F. This beautiful body is supplied clear with overspray film. Includes window masks, wing and wing mounting hardware. Pre formed dimples for mounting to a SupaStox. BRCA GT12 Approved body.

SupaStox 1/12th pan car body Hot Hatch Type M6 with wing, window masks and wing mounting hardware.

This castor gauge set is used to accurately set castor on the Mi9 when using kit upper links. This is not required with the fixed
castor type upper wishbone found on the Mi9 ‘Upper wishbone conversion.’

It will work with Arrowmax 4d system, Arrowmax Black and Gold, Arrowmax silver system and new and old Hudy systems.

Optional transmission housing for the Mi9

The diff sits 2mm higher than standard in these. 

Adjust upper link mounts by 2mm to achieve the same geometry.

GEAR DIFF MOULDINGS - MI9

Iris ONE Spool

Iris ONE Middle Gear Set

Iris ONE Drive Belt 270mm (3pcs | 3mm)

Iris ONE Center Drivetrain Shim and Spacer Set

Iris Anti-Roll Bar Outside Mount (2pcs)

Iris Anti-Roll Bar Collar (2pcs)

Iris Anti-Roll Bar Stud (2pcs)

Iris ONE.05 Stiffener Post Set

Iris ONE.05 FWD Chassis Stiffener Spacer (4pcs)

Iris ONE.05 FWD +15mm Servo Mount Set

Iris ONE Wheel Hex 3.5mm (2pcs)

Improve the performance of your Iris ONE race car with the Iris ONE Wheel Hex 3.5mm. Compared to the standard 4.0mm wheel hex, these 3.5mm wheel hex allow for individual adjustment of the vehicle width. This provides an additional tuning option to achieve the best possible handling on various tracks. Made from high-quality 7075 aluminum and anodized in striking Iris red, they are not only durable but also visually appealing. A laser marking makes identification easy.

Product Features:

• Allows individual adjustment of the vehicle width
• Manufactured from high-quality 7075 aluminum for durability
• Anodized in striking Iris Red for a visually appealing look
• With laser marking for easy identification

Iris ONE Wheel Hex 4.5mm (2pcs)

Improve the performance of your Iris ONE race car with the Iris ONE Wheel Hex 4.5mm. Compared to the standard 4.0mm wheel hex, these 4.5mm wheel hex allow for individual adjustment of the vehicle width. This provides an additional tuning option to achieve the best possible handling on various tracks. Made from high-quality 7075 aluminum and anodized in striking Iris red, they are not only durable but also visually appealing. A laser marking makes identification easy.

Product Features:

• Allows individual adjustment of the vehicle width
• Manufactured from high-quality 7075 aluminum for durability
• Anodized in striking Iris Red for a visually appealing look
• With laser marking for easy identification

Iris ONE Upper Arm Shim - 2mm (2pcs)

Iris ONE Upper Arm Shim - 1mm (2pcs)

Iris ONE Upper Arm Shim - 0.5mm (2pcs)

Iris ONE Driveshaft Bushings (4pcs)

These carefully crafted bushings have been developed for use in the Iris ONE and ONE.05 and replace the standard ball bearings with durable brass bushings. These brass bushings offer improved durability compared to conventional ball bearings, especially when using high performance modified motors. In addition, they are compatible with a variety of other vehicles, including the Awesomatix A800R and the Xray X4.

Features:

• Made from high-quality brass for increased durability
• Ideal for use with high-powered Modified motors
• Compatible with many other model vehicles like Awesomatix A800R, Xray X4

Specifications:

• Material: Brass
• Suitable for: Iris ONE, ONE.05, and other models
• Dimensions: 1.5x4x2mm
• Quantity: 4 pieces per pack

Iris ONE CF Bumper Top Plate

Iris ONE Bulkhead Insert - 0.75mm (2pcs)

Iris ONE Aluminium Spool Outdrive (2pcs)

These hard-coated aluminium differential outdrives for the Iris ONE.05 and ONE.05 FWD cars have been developed for the 17.5T and 21.5T stock class. They provide a weight advantage of around 3 grams per pair compared to the steel parts and so improve the Performance of your Iris ONE.

Features:

• Ideal for stock class racing
• Hard-coated for added resilience
• Suitable for Iris ONE, ONE.05 and ONE.05 FWD models
• Weight benefit of about 3g compared to standard steel outdrives
• Weight per pair: 2.0g

Iris ONE Aluminium Differential Outdrive (2pcs)
These hard-coated aluminium differential outdrives for the Iris ONE.05 and ONE.05 FWD cars have been developed for the 17.5T and 21.5T stock class. They provide a weight advantage of around 3 grams per pair compared to the steel parts and so improve the Performance of your Iris ONE.

Features:

• Ideal for stock class racing
• Hard-coated for added resilience
• Suitable for Iris ONE, ONE.05 and ONE.05 FWD models
• Weight benefit of about 3g compared to standard steel outdrives
• Weight per pair: 1.7g

Iris ONE Front Topdeck (Hard | 3.0mm)

Iris ONE.05 CF Lower Bumper Plate

Iris ONE.05 CF Rear Body Mount Plate

Iris ONE Wheel Hex Plastic Shim (4pcs)

Iris ONE Shim Set

Iris Ball Stud Washers (4pcs)

Iris Aluminium M3 Thread Inserts (4pcs)

Iris 6x3x2.0mm Open Washers (4pcs)

The Iris Open Washers have been developed to improve adjustability on the Iris ONE making camber and caster/wheelbase adjustments faster, while still maintaining its crash proof design. Available in three different thicknesses, they offer all the adjustability you need.

IRIS-85010 Iris 6x3x0.5mm Open Washers (4pcs)

IRIS-85011 Iris 6x3x1.0mm Open Washers (4pcs)

IRIS-85012 Iris 6x3x2.0mm Open Washers (4pcs)

Iris 6x3x1.0mm Open Washers (4pcs)

The Iris Open Washers have been developed to improve adjustability on the Iris ONE making camber and caster/wheelbase adjustments faster, while still maintaining its crash proof design. Available in three different thicknesses, they offer all the adjustability you need.

IRIS-85010 Iris 6x3x0.5mm Open Washers (4pcs)

IRIS-85011 Iris 6x3x1.0mm Open Washers (4pcs)

IRIS-85012 Iris 6x3x2.0mm Open Washers (4pcs)

Iris 6x3x0.5mm Open Washers (4pcs)

The Iris Open Washers have been developed to improve adjustability on the Iris ONE, making camber and caster/wheelbase adjustments faster, while still maintaining its crash proof design. Available in three different thicknesses, they offer all the adjustability you need.

IRIS-85010 Iris 6x3x0.5mm Open Washers (4pcs)

IRIS-85011 Iris 6x3x1.0mm Open Washers (4pcs)

IRIS-85012 Iris 6x3x2.0mm Open Washers (4pcs)

Iris Upper Arm Mount Screws (4pcs)

Iris Topdeck Mounting Screws (4pcs)

Iris M3x8mm Button Head Screws (10pcs)

Iris M3x6mm Button Head Screws (10pcs)

Iris M3x3mm Set Screw Screws (10pcs)

Iris M3x12mm Flat Head Screws (10pcs)

Iris M2x6mm Socket Head Screws (10pcs)

Iris M2x6mm Flat Head Screws (10pcs)