Iris ONE.1 FWD One-Piece Topdeck 2.0mm

Bittydesign HYPER-GT8 1/8 GT clear body 325mm (LW | 1.0mm)

TAMIYA TA07 Carbon Stiffener (Center)
TA07 Carbon Stiffener (Center)
Increase your setup options for the TA07 PRO chassis with this 2mm thick carbon fiber center stiffener. This lightweight and rigid part fits neatly onto the center brace and rear stiffeners for more rigidity and stiffer pitch damping.
Item Contents
•Carbon Fiber Stiffener (Center) x1
•Screws for attachment included.
•This item pairs perfectly with carbon fiber front (Item 54788) and rear (Item 54789) stiffeners.
•Compatible with TA07 PRO chassis cars.
 

SCHUMACHER Ultra Short Shock Piston 4H pr - Mi6-9,FT8

SCHUMACHER C/F Front Wishbone - Mi9

SCHUMACHER Ball Bearing 1.5x4x2 Shield - pr
Schumacher Bearing Guidlines

Yellow = ABEC5, oil filled, shielded, steel balls recommended for relatively clean conditions. Schumacher On Road cars kit specification.
Red = ABEC5, grease filled, double rubber seals, steel balls recommended for wet or dirty conditions. Schumacher Off Road cars kit specification.
Orange or Grey = ABEC 5, oil filled, shielded, extra hard ceramic balls for higher efficiency. Recommended for On Road.
Black = Pro High Precision German or Japanese manufactured, rubber seal. Recommended for Off Road.
Metal = Pro High Precision German or Japanese manufactured, shielded. Recommended for On Road.

SCHUMACHER Diff Output - Mi9 (pr)

SCHUMACHER Nano Shock Shaft - Mi9 (pr)

SCHUMACHER Alloy ARB Drop Link - Mi8,FT8,Mi9 (pr)

SCHUMACHER Nano Lower Shock Socket - Mi9 (pk4)

SCHUMACHER Alloy LiPo Swivel - Mi8,L1R,FT8,ST2,LD3,Mi9 (pr)
Bling up your car with this cool looking black alloy LiPo swivel.

Increased strength over kit item.

When combined with U8438 Alloy Lipo Mounts - LD2 (pr) we suggest using a plastic LiPo swivel or a plastic height adjustment washer when using these as an insulator from short circuit.

Contact 1/12 Universal Truer Arbor

SCHUMACHER M3 Brass Black Thread Inserts - pk10

SCHUMACHER Wheel Front Med 2WD - Flexlite White - pr
Wheel Front Med 2WD - Flexlite White - pr
 

Bearing size - 3/16 x 3/8 

SCHUMACHER Rear Belt; Black 60T - Mi1 ,Mi2EC

SCHUMACHER Front Belt - Mi1 - Requires U7708 Belt Adj
This is a new version Mi1v2 belt, supplied from 2020.

The older grey belt is not available anymore.

It requires U7708 if you have an older car and this is not fitted to you car already.

SCHUMACHER Hexagon 3D Flex Bumper Mi7,Mi8,Mi9
For the Mi9 is this Hexagon 3D Flex Bumper.

Weighing in at 10g the new TPU bumper is primarily for the new Mi9, but will also fit the Mi7 and Mi8.  It is designed to give a great fit for the popular Xtreme Twister/Speciale body's, and also looks great too!

The bumper has a 10mm longer protrusion so gives a better fit for the modern method of forward mounted bodies.  No more need for extra bumper foam!

The flexible design provides great impact resistance too. 

SCHUMACHER Driveshaft E-Clip V2 - Mi9 (pk10)
Special E clip for Mi9 driveshafts.

Easier fitting than kit item.

SCHUMACHER M2 x 4 Button Hd -1.5 Hex (pk 10)
M2 x 4 button head screw. Used as a bleed screw in shock caps.

SCHUMACHER Decal - Mi9

SCHUMACHER Rear Axle - Mi9

SCHUMACHER Front Axle - Mi9

SCHUMACHER Rear Driveshaft Bone - Mi9

SCHUMACHER Driveshaft Yoke Inner - Mi9 each

SCHUMACHER Front Driveshaft Cage - Mi9

SCHUMACHER Driveshaft Yoke Outer - Mi9

SCHUMACHER Front Driveshaft Bone - Mi9

SCHUMACHER Layshaft - Mi7,Mi8,FT8,Mi9

SCHUMACHER Alloy Layshaft Pulley - Mi8,Mi9

SCHUMACHER Alloy Spool Hub - Mi9

Diff Output Shaft - Mi9 (pr)

SCHUMACHER Inner Wishbone Ball - Mi9 (pk4)

SCHUMACHER Nano Shock Diaphragm - Mi9 (pk8)

SCHUMACHER-Driveshaft-Spring-Clip-Mi9-(pr)

SCHUMACHER-Lower-Shock-Ball-Mi9-(pk4)

Robitronic Transmitter Bag

Product information "Robitronic Razer eight Brushless Combo 150A 4268 2600kV"

Razer^eight 150A Regler:

Der Razer^eight 150A Regler hat alle wichtigen Features und Einstellmöglichkeiten an Board die sich ein ambitionierter 1/8er Pilot wünscht. Durch die herausragende Qualität erhalten Sie einen Regler mit höchster Zuverlässigkeit und bester Effizienz für den Einsatz in allen 1/8er Klassen.

Am Regler sind alle Kabel bereits anschlussfertig verdrahtet, kein Löten notwendig. 
Akkuanschluss: T-Stecker,
Motoranschluss: 4mm Buchsen

Eigenschaften:

• Vollständig wasser- und staubdichter Regler (gilt nicht für den Motor)
• EIN/AUS Schalter mit Setup Taster
• S-BEC mit 6V und 5A Spitzenstrom
• Plug and Play, Akku und Motorstecker bereits verlötet
• Mehrfache Schutzvorrichtungen: Unterspannungsabschaltung, thermischer Schutz und Schutz bei Signalverlust.
• Einfache Programmierung über Setuptaster
• Separater Programmier-Port, einfaches Verbinden der LED-Programmkarte (optional)

Technische Daten:

Razer^eight Motor 4268 mit 2600KV:

Der Razer^eight ist ein sensorloser Hochleistungsmotor designt für maximale Leistung.  Hohes Drehmoment und einer perfekten Leistungsentfaltung lassen den Motor zur ersten Wahl für ihr Modell werden.

Eigenschaften:

• 4-poliges Rotordesign für hohes Drehmoment und schnelles Ansprechverhalten
• CNC gefrästes, hochfestes Aluminiumgehäuse für optimale Wärmeableitung
• Motorwicklung aus reinem, doppelt isoliertem Kupferdraht
• Präzisionskugellager für beste Laufruhe und Lebensdauer
• Hochflexible Silikonanschlusskabel mit fertig verlöteten 4mm Steckern
• Hochfeste und polierte 5mm Rotorwelle aus Stahl

Technische Daten:

Lieferumfang:

1x Regler fertig verdrahtet mit Akkustecker und Motoranschluss
1x Motor anschlussfertig mit 4mm Stecker
1x Anleitung

Robitronic-Razer-ten-G2-Brushless-Combo-60A-3652-4000kV
Product information "Robitronic Razer ten G2 Brushless Combo 60A 3652 4000kV"

Whether it's 1/10 On-Road or 1/10 Off-Road, the action starts with the Razer^ten G2 Combo. The Razer^ten G2 60A ESC is always the top choice when reliability, efficiency, and durability are paramount. With extensive adjustment and programming options, it leaves nothing to be desired. All cables are pre-wired and ready to connect, no soldering required. Paired with the 4000kV Razer^ten motor, it delivers a sensorless experience with immense power. The motor's disassemblable CNC machined aluminum housing and precision-balanced rotor with high-quality ball bearings are top-class features.

Features (ESC):

• More compact and modern than its predecessor
• Fully water and dustproof ESC (not applicable to the motor)
• ON/OFF switch with setup button
• S-BEC with 6V and 3A peak current
• Plug and Play, battery and motor connectors pre-soldered
• Multiple protection features: low voltage cutoff, thermal protection, and signal loss protection
• Easy programming via setup button
• Separate programming port, easy connection for optional LED programming card

Features (Motor):

• 4-pole rotor design for high torque and quick response
• CNC machined high-strength aluminum housing for optimal heat dissipation
• Motor winding made of pure, double-insulated copper wire
• Precision ball bearings for smooth operation and longevity
• Highly flexible silicone connection cables with pre-soldered 4mm connectors
• High-strength, polished 3.17mm steel rotor shaft

Technical Specifications:

Delivery:

1x Razer ten G2 ESC with 60A, pre-wired with battery connector and motor connection
1x Razer ten Motor with 4000kV, pre-wired with 4mm connectos
1x Manual

SCHUMACHER-C/F-Rear-Wishbone-Mi9

SCHUMACHER Driveshaft Pin Outer - Mi9 (pr)

SCHUMACHER Wheel Bearing Spacer - Mi9 (pr)

SCHUMACHER Alloy T Brace - Mi8,FT8,Mi9
Alloy T brace to stiffen rear of the chassis.  This can give more rotation on medium to high grip surfaces.

SCHUMACHER Roll Bar Socket - Mi8,FT8,Mi9 (pk4)

SCHUMACHER Nano Shock Spring Seat - Mi9 (pr)

SCHUMACHER Alloy Centre Track Rod Assy - Mi7,Mi8,Mi9

SCHUMACHER C/F Steering Arm FR - Mi9

3.5 x 1 'O'ring (pk10) - Mi9

SCHUMACHER Nano Shock Collar O-ring - Mi9 (pk4)

SCHUMACHER High Power Belt Roller - Mi8,Mi9

SCHUMACHER Spur Gear Screw - Mi7,Mi8,FT8,Mi9 (pk3)