XRAY T4 2020 Opties

HUDY PURE TUNGSTEN WEIGHT 5g - 293081

HUDY PURE TUNGSTEN WEIGHT 10g - 293082

Hudy Alu Countersunk Shim - Orange (10), H296510-o

Hudy Alu Nut M3 - Blue (10), H296530-b

Hudy Alu Nut M4 - Blue (10)

Hudy Alu Nut M4 - Black (10)

Hudy Alu Nut M4 - Orange (10)

XRAY T4'20 ARS - ACTIVE REAR SUSPENSION SET - 300902

T4’20 chassis is designed and developed for the centrally positioned layshaft. The chassis is completely redesigned to work with the narrower mounting bulkheads and allows to mount both longer suspension arms as well as optional short arms.

The alu solid chassis gives better control, stability and makes the car easier to drive in high traction carpet conditions.

Extensively tested and recommended for high- and very-high traction tracks, this narrow chassis is CNC-machined from 2mm premium Swiss 7075 T6 and additionally black coated.

Aluminum T4’20 chassis with special cutout openings for increased flex. This chassis is recommended for low traction carpet tracks and high traction asphalt tracks. (Not recommended for high- and very-high traction conditions where either the #301001 or #301002 chassis work better).

XRAY T4'20 GRAPHITE UPPER DECK 1.6MM - 301061

Xray Alu Countersunk Shim (4), X301159

XRAY Alu Countersunk Shim - Orange (4) - 301159-O

XRAY T2 Impact Absorbing Front Bumper - 301203

Xray Composite Bumper Upper Holder Brace

Graphite bumper upper holder brace helps to reduce chassis breakage in serious crashes. The graphite bumper upper holder brace is mounted on the top composite or graphite upper holder for the bumper. The brace matches the shape of the bulkhead so if a crash occurs, the brace touches the bulkhead and protects the front of the chassis from breakage.

CNC-machined front upper bumper holder made from premium-grade graphite material. Direct replacement for the standard composite bumper upper holder. Accommodates the BPA system – Body Position Adjustment – which uses eccentric body mounts in three different positions to adjust the position of the body.

Front Body Mount Set

XRAY Front Body Mount Set +1mm Height - 301323

XRAY Front Body Mount Set +2mm Height - 301324

Front eccentric body mount set with 6mm-thick +1mm height-adjustable body posts. Made from special composite material that provides maximum strength but sufficient flex to reduce body post breakage in hard crashes or car rollovers. The body supports are rounded to have a better fit and provide better support to the car body.

Part of the BPA system – Body Position Adjustment – the eccentric design allows the body posts to be mounted in three different positions to adjust body position.

For serious racers who focus on the small details, body height plays a very important role in the performance of the car and as such, ultra-fine body height tuning was developed by XRAY R&D engineers to address this increasingly important tuning set-up feature.

The body holders have elevated mounting to make body height adjustment very quick and easy. In a few short seconds and two clicks, you can exchange all the body holders to adjust body height.

There are two optional body height adjustable mounts available: either +1mm or +2mm.

Front eccentric body mount set with 6mm-thick +2mm height-adjustable body posts. Made from special composite material that provides maximum strength but sufficient flex to reduce body post breakage in hard crashes or car rollovers. The body supports are rounded to have a better fit and provide better support to the car body. Part of the BPA system – Body Position Adjustment – the eccentric design allows the body posts to be mounted in three different positions to adjust body position. For serious racers who focus on the small details, body height plays a very important role in the performance of the car and as such, ultra-fine body height tuning was developed by XRAY R&D engineers to address this increasingly important tuning set-up feature. The body holders have elevated mounting to make body height adjustment very quick and easy. In a few short seconds and two clicks, you can exchange all the body holders to adjust body height. There are two optional body height adjustable mounts available: either +1mm or +2mm.

XRAY Rear Body Mount Set +2mm Height - 301334

Rear body mount set with 6mm-thick +1mm height-adjustable body posts. Made from special composite material that provides maximum strength but sufficient flex to reduce body post breakage in hard crashes or car rollovers. The body supports are rounded to have a better fit and provide better support to the car body.

Designed for use with graphite inserts that allow adjustment of the rear posts to three different positions, this body mount set is part of the BPA system – Body Position Adjustment.

For serious racers who focus on the small details, body height plays a very important role in the performance of the car and as such, ultra-fine body height tuning was developed by XRAY R&D engineers to address this increasingly important tuning set-up feature.

The body holders have elevated mounting to make body height adjustment very quick and easy. In a few short seconds and two clicks, you can exchange all the body holders to adjust body height.

There are two optional body height adjustable mounts available: either +1mm or +2mm.

Rear body mount set with 6mm-thick +1mm height-adjustable body posts. Made from special composite material that provides maximum strength but sufficient flex to reduce body post breakage in hard crashes or car rollovers. The body supports are rounded to have a better fit and provide better support to the car body.

Designed for use with graphite inserts that allow adjustment of the rear posts to three different positions, this body mount set is part of the BPA system – Body Position Adjustment.

For serious racers who focus on the small details, body height plays a very important role in the performance of the car and as such, ultra-fine body height tuning was developed by XRAY R&D engineers to address this increasingly important tuning set-up feature.

The body holders have elevated mounting to make body height adjustment very quick and easy. In a few short seconds and two clicks, you can exchange all the body holders to adjust body height.

There are two optional body height adjustable mounts available: either +1mm or +2mm.

XRAY Alu Adjustable Body Post Stop (2) - 301351-O

XRAY ALU ADJUSTABLE BODY POST STOP NUT (2) - 301352-O

XRAY T4'20 ULP GRAPHITE SHOCK TOWER FRONT 3.0MM - LOW - 301961

The SLP (Super-Low Profile) front shock tower allows to mount the shocks lower to lower the CG. With the lower shock mounting, the car is more stable as it rolls less, is easier to drive over chicanes, and has improved steering response. Recommended for medium-high technical tracks, especially for carpet.

Made from 3.0mm thick premium-grade graphite material to guarantee maximum strength and long life. Recommended for use with SLP shocks, especially in extremely-low traction track conditions.

Xray T4 Alu Adjustment Ball-bearing Hub - Black

XRAY ALU FRONT & REAR SUSPENSION ARM 1-HOLE -- SWISS 7075 T6 (2+2) - 302101

XRAY T2'008 Front Suspension Arm Hard Rubber-Spec 1-Hole - 302163

XRAY Front Suspension Arm - Hard - Rubber-Spec - 2-Hole - 302165

XRAY Front Suspension Arm - Extra-Hard - Foam-Spec - 2-Hole - 302166

XRAY FRONT SUSPENSION ARM - HARD - 1-HOLE - 302168

XRAY ALU FRONT SUSPENSION ARM - 1-HOLE - SWISS 7075 T6 - 302170

XRAY FRONT SUSPENSION ARM SHORT - GRAPHITE - 302171-G

XRAY FRONT SUSPENSION ARM SHORT - HARD - 302171-H

XRAY FRONT SUSPENSION ARM LONG RIGHT - HARD - 302173-H

XRAY FRONT SUSPENSION ARM LONG LEFT - HARD - 302174-H

XRAY GRAPHITE FRONT LOWER ARM PLATE 1.6MM (2) - 302190

Alu steering blocks with ultra-strong construction provides very long life and durability in even the most extreme racing conditions. Composite bushings are used to secure the ball-bearings in both sides of this steering block; this allows the ball-bearings to fit perfectly and turn freely, giving much higher lifetime compared to bearings installed directly into aluminum steering blocks. CNC-machined from premium lightweight T6 aluminum. Black coated. Set of Left and Right steering block.

Alu steering block is recommended for high traction conditions as it improves stability and makes the car turn smoother. The alu steering block is recommended for ARS as well as it allows greater toe in-out gain adjustment possibilities.

The graphite extensions mount to the steering block. Features same ackermann position as the standard composite steering block. The extension is can be mount either from the top or bottom.

XRAY T2 Composite Steering Block Medium Rubber-Spec - 302252

XRAY COMPOSITE STEERING BLOCK - GRAPHITE - 302254

XRAY T2 Alu Steering Block With Bearings - 302256

Xray Alu Steering Block - Black - Swiss 7075 T6

Xray T2 Ball-bearing Composite Bushing (4), X302295

XRAY Composite C-Hub Bushing (2+2)

XRAY T2 Alu C-Hub Front Block 0 deg. Deg. - orange - 302334