Er zijn nog geen producten in uw winkelwagen geplaatst.
Accu's
Bezig met laden...
CARSON 500607012 Expert Charger NiMH Compact 1A/ACCU2100MINH
CARSON LADER 1A
CARSON ACCU 2100 MINH
4X AA PENLICHT
Competition LiPo HV 140C/1S2P HC 8300mAh 5mm ABSIMA
Competition-LiPo-HV-140C/1S2P-HC-8300mAh-5mm-ABSIMA
The new ABSIMA LiPo batteries represent the current spearhead of development in lithium battery technology and offer new levels of performance. Masterful engineering skills, combined with experience from professional model sport, have resulted in a performance-optimised battery generation that is unrivalled on the track. The addition of graphene gives the battery improved properties such as higher energy density, lower internal resistance, higher discharge rates and a longer life cycle.
Advantages of a graphene-lipo battery:
The ABSIMA Graphene Lipo series can be used as a standard 3.7V LiPo battery or as a high voltage (HV) 3.8V LiPo. But what is the difference between the capacities 3.7V Standard and 3.8V High Voltage? Normal LiPo batteries have a final charge voltage of 4.2V per cell when fully charged. Due to the unique hybrid RS cell structure, the new type can handle a little more and can be charged up to 4.35V. This not only results in more power from the start, but also means that there is more power in each individual cell and therefore longer runtimes can be achieved.
How do I charge HV LiPo batteries?
First check whether your charger contains a programme for charging HV LiPos. It must be possible to set a final charging voltage of 4.35V. If this is the case, HV LiPo batteries can be charged in the same way as conventional LiPo batteries. The maximum charging rate for an ABSIMA Graphene Lipo is 5C (5 times the capacity of the battery).
Another very important note on the charging process!
Please be sure to reset the final charging voltage to 4.2V after completing the HV battery charge. Never charge a standard LiPo battery (3.7V) with a final voltage of 4.35V!
Good to know:
1. a LiPo battery should never be stored fully charged or discharged (3V under load / 3.5V open circuit voltage). For optimum battery life, it is recommended to store the LiPo battery in a cool room (e.g. cellar) with a charge level between 50%-80% of capacity. A LiPo battery that is 50% charged has a cell voltage of +/-3.85V.
2. HV-Lipos can also be charged with up to 4.2V like normal Lipos. Due to their much more compact design and lower voltage drop under full load, they still offer longer runtimes.
FEATURES:
Capacity: 8300mAh
Discharge rate (C): 140C
Voltage: 1S (3.8V HV)
Parallel: 2P
Wh: 31.54
Max. charging current: up to 5C (1C recommended)
Cable: 12AWG - 200°
Balance cable: 22AWG - 200°
Cable connections: 5mm Bullet / T-Plug
Design: Hardcase
Dimensions: 93*47*15.5mm
Weight: 146g
CORE RC HEATSINK BULLET PLUG GRIPS - 4MM
Awesome plug covers that help with the removal of your battery plugs. Plus, assist you in plugging in the correct polarity. Super bling look! Secures with the grub screw provided
CORE RC HEATSINK BULLET PLUG GRIPS - 5MM
Awesome plug covers that help with the removal of your battery plugs. Plus, assist you in plugging in the correct polarity. Super bling look! Secures with the grub screw provided.
Eneloop AA 2000mAh Ve 4st.
Eneloop AA 2000mAh Ve 4st.
De akku zonder zelfontlading
Technische specificaties:
- Accucapaciteit: 2000 mAh
- Spanning: 1.2 V
- Grootte: Penlite (AA)
- Technologie: NiMH
- Inhoud: 4 st.
- Afm.: (Ø x h) 14 mm x 50.5 mm
- Type: HR-3UTG 4BP
- Oplaadbaar: Ja
EAN: 4994334225030
Gens ace Redline Series 8000mAh 3.8V 1S 130C HV LiPo (4mm, 147g)
Gens Ace Redline Series 1S 130C 8000mAh Hardcase LiPo Battery Pack, with a factory installed 4.0mm bullet. Consumers trust the Gens Ace name to deliver the dependability and high performance they expect. The Gens Ace 130C 1S 8000mAh 3.8V HV LiPo battery pack has a high-capacity, high-discharge rate that gives you the power and run-time you expect.
Features:
- Stable automatic stacking technology enables single cell capacities of 4000mAh.
- The most strict single cell capacity, voltage, resistance, discharge curve matching process.
- Standard ∮4.0mm bullet.
Specifications:
Capacity | 8000mAh |
Voltage | 3.8V / 1S2P / 2 Cells |
Discharge Rate | 130C |
Max Burst Discharge Rate | 260C |
Weight | 147g |
Size | 93 x 47 x 18 mm (L x W x H) |
Connector Type | 4.0mm bullet |
Gens ace Redline V2 Series 5800mAh 7.6V 2S 130C HV LiPo (5mm, 222g)
Gens Ace Redline V2 Series 2S 130C 5800mAh Hardcase LiPo Battery Pack. Consumers trust the Gens Ace name to deliver the dependability and high performance they expect. The Gens Ace 130C 2S 5800mAh 7.6V LiPo battery pack has a high-capacity, high-discharge rate that gives you the power and run-time you expect.
Features:
- Stable automatic stacking technology enables single cell capacities of 5800mAh.
- The most strict single cell capacity, voltage, resistance, discharge curve matching process.
- Superior Japan and Korea Lithium Polymer raw materials.
- Standard ∮5.0mm bullet
Specifications:
Capacity | 6000mAh |
Voltage | 7.6V / 2S1P / |
Discharge Rate | 130C |
Max Burst Discharge Rate | 260C |
Weight | 222g |
Size | 139mm x 47mm x 18.5mm (L x W x H) |
Connector Type | 5.0mm bullet |
GensAce Redline 2.0 2S HV 7.6V-140C-6500 139x47x22.5mm 265g
Gens Ace Redline 2.0 Series 2S 140C 6500mAh Hardcase LiPo Battery Pack, with a factory installed 5.0mm bullet. Consumers trust the Gens Ace name to deliver the dependability and high performance they expect. The Gens Ace 140C 2S 6500mAh 7.6V HV LiPo battery pack has a high-capacity, high-discharge rate that gives you the power and run-time you expect .
Features:
- Stable automatic stacking technology enables single cell capacities of 6500mAh.
- The most strict single cell capacity, voltage, resistance, discharge curve matching process.
- Standard ∮5.0mm bullet
Specifications:
- Capacity: 6500mAh
- Voltage: 7.6V / 2S1P
- Discharge Rate: 140C
- Weight: 264g
- Size: 139mm x 47mm x 22.5mm (L x W x H)
- Connector Type: 5.0mm bullet
GensAce Redline 2.0 2S HV 7.6V-140C-8500 139x47x25mm 302g
Gens Ace Redline 2.0 Series 2S 140C 8500mAh Hardcase LiPo Battery Pack, with a factory installed 5.0mm bullet. Consumers trust the Gens Ace name to deliver the dependability and high performance they expect. The Gens Ace 140C 2S 8500mAh 7.6V HV LiPo battery pack has a high-capacity, high-discharge rate that gives you the power and run-time you expect .
Features:
- Stable automatic stacking technology enables single cell capacities of 8500mAh.
- The most strict single cell capacity, voltage, resistance, discharge curve matching process.
- Standard ∮5.0mm bullet
Specifications:
- Capacity: 8500mAh
- Voltage: 7.6V / 2S1P
- Discharge Rate: 140C
- Weight: 302g
- Size: 139mm x 47mm x 25mm (L x W x H)
- Connector Type: 5.0mm bullet
GensAce Redline 2.0 Low Prof 2S HV 7.6V-140C-6100 139x47x18.5mm 226g
Gens Ace Redline 2.0 Series 2S 140C 6100mAh Hardcase LiPo Battery Pack, with a factory installed 5.0mm bullet. Consumers trust the Gens Ace name to deliver the dependability and high performance they expect. The Gens Ace 140C 2S 6100mAh 7.6V HV LiPo battery pack has a high-capacity, high-discharge rate that gives you the power and run-time you expect .
Features:
- Stable automatic stacking technology enables single cell capacities of 5000mAh.
- The most strict single cell capacity, voltage, resistance, discharge curve matching process.
- Standard ∮5.0mm bullet
Specifications:
- Capacity:6100mAh
- Voltage: 7.6V / 2S1P / 2 Cells
- Discharge Rate: 140C
- Weight: 226g
- Size: 139*47*18.5mm (L x W x H)
- Connector Type: 5.0mm bullet
GensAce Redline 2.0 Shorty 2S HV 7.6V-140C-4200 96x47x18.5mm 157g
Gens Ace Redline 2.0 Series 2S 140C 4200mAh Hardcase LiPo Battery Pack, with a factory installed 5.0mm bullet. Consumers trust the Gens Ace name to deliver the dependability and high performance they expect. The Gens Ace 140C 2S 4200mAh 7.6V HV LiPo battery pack has a high-capacity, high-discharge rate that gives you the power and run-time you expect .
Features:
- Stable automatic stacking technology enables single cell capacities of 4200mAh.
- The most strict single cell capacity, voltage, resistance, discharge curve matching process.
- Standard ∮5.0mm bullet
Specifications:
- Capacity: 4200mAh
- Voltage: 7.6V / 2S1P / 2 Cells
- Discharge Rate: 140C
- Weight: 157g
- Size: 96mm x 47mm x 18.5mm (L x W x H)
- Connector Type: 5.0mm bullet
GensAce Redline 2.0 Shorty 2S HV 7.6V-140C-5300 96x47x22.5mm 199g
Gens Ace Redline 2.0 Series 2S 140C 5300mAh Hardcase LiPo Battery Pack, with a factory installed 5.0mm bullet. Consumers trust the Gens Ace name to deliver the dependability and high performance they expect. The Gens Ace 140C 2S 5000mAh 7.4V HV LiPo battery pack has a high-capacity, high-discharge rate that gives you the power and run-time you expect .
Features:
- Stable automatic stacking technology enables single cell capacities of 5300mAh.
- The most strict single cell capacity, voltage, resistance, discharge curve matching process.
- Standard ∮5.0mm bullet
Specifications:
- Capacity: 5300mAh
- Voltage: 7.6V / 2S2P
- Discharge Rate: 140C
- Weight: 199g
- Size: 96mm x 47mm x 22.5mm (L x W x H)
- Connector Type: 5.0mm bullet
GensAce Redline 2.0 Shorty 2S HV 7.6V-140C-6000 96x47x25mm 220g
Gens Ace Redline 2.0 Series 2S 140C 6000mAh Hardcase LiPo Battery Pack, with a factory installed 5.0mm bullet. Consumers trust the Gens Ace name to deliver the dependability and high performance they expect. The Gens Ace 140C 2S 6000mAh 7.6V HV LiPo battery pack has a high-capacity, high-discharge rate that gives you the power and run-time you expect .
Features:
- Stable automatic stacking technology enables single cell capacities of 6000mAh.
- The most strict single cell capacity, voltage, resistance, discharge curve matching process.
- Standard ∮5.0mm bullet
Specifications:
- Capacity: 6000mAh
- Voltage: 7.6V / 2S2P
- Discharge Rate: 140C
- Weight: 220g
- Size: 96mm x 47mm x 25mm (L x W x H)
- Connector Type: 5.0mm bullet
Intellect 3000mAh 3.7V 1S TX LiPo for Sanwa MT44
Specifications:
Voltage | 3.7V |
Capacity | 3000mAh |
Cells | 1S |
Connector | RX |
Dimensions | 60 x 45 x 10 mm |
Weight | 53g |
Intellect 6000mAh 3.7V 1S TX LiPo for Sanwa M17
Optional LiPo battery for the SANWA M17 radio. 6000mah compared to the standard 2500mah supplied in the radio.
Specifications:
Voltage | 3.7V |
Capacity | 6000mAh |
Cells | 1S |
Connector | RX |
Dimensions | 12 x 46.8 x 77.5 mm |
Weight | 94g |
Intellect Graphene 2022 1/12-8minute 8800mAh 3.8V 1S 120C HV LiPo (4mm, 152g)
New for 2022 are Intellect's PT2 series range of awesome LiPo's. Metallic green lettering distinguishes them for 2022. 2 years of technological improvement for the 2022 versions see's improvements in power and runtime in the same size cases.
Huge range of batteries for all applications and required weights for perfect chassis balance and centre of gravity. All the batteries have a burst current of 120C and have LIHV technology.
As always with Intellect LiPo's they are excellent value for money.
BRCA/EFRA legal as of April 1st 2022.
Includes balance charge leads and connectors. 152g Long Runtime - LMP12, GT12.
Specifications:
Capacity | 8800mAh |
Voltage | 3.7V |
Discharge Rate | 120C |
Dimensions (H x L x W) | 18.5mm x 93mm x 47mm |
Weight | 152g |
Connector | 4mm |
Intellect Graphene 2022 LCG Shorty 4800mAh 7.6V 2S 120C HV LiPo (5mm, 165g)
New for 2022 are Intellect's PT2 series range of awesome LiPo's. Metallic green lettering distinguishes them for 2022. 2 years of technological improvement for the 2022 versions see's improvements in power and runtime in the same size cases.
Huge range of batteries for all applications and required weights for perfect chassis balance and centre of gravity. All the batteries have a burst current of 120C and have LIHV technology.
As always with Intellect LiPo's they are excellent value for money.
BRCA/EFRA legal as of April 1st 2022.
Includes balance charge leads and connectors. Low CofG 20mm, 165g - Off Road.
Specifications:
Capacity | 4800mAh |
Voltage | 7.6V |
Discharge Rate | 120C |
Dimensions (H x L x W) | 20mm x 96mm x 47mm |
Weight | 165g |
Connector | 5mm |
Intellect Graphene 2022 Long Runtime Shorty 6400mAh 7.6V 2S 120C HV LiPo (5mm, 220g)
New for 2022 are Intellect's PT2 series range of awesome LiPo's. Metallic green lettering distinguishes them for 2022. 2 years of technological improvement for the 2022 versions see's improvements in power and runtime in the same size cases.
Huge range of batteries for all applications and required weights for perfect chassis balance and centre of gravity. All the batteries have a burst current of 120C and have LIHV technology.
As always with Intellect LiPo's they are excellent value for money.
BRCA/EFRA legal as of April 1st 2022.
Includes balance charge leads and connectors. Long Runtime, 25.1mm, 220g.
Specifications:
Capacity | 6400mAh |
Voltage | 7.6V |
Discharge Rate | 120C |
Dimensions (H x L x W) | 25.1mm x 96mm x 47mm |
Weight | 220g |
Connector | 5mm |
Intellect Graphene 2022 TC Modified-LCG Hi Power 6000mAh 7.6V 2S 120C HV LiPo (5mm, 270g)
New for 2022 are Intellect's PT2 series range of awesome LiPo's. Metallic green lettering distinguishes them for 2022. 2 years of technological improvement for the 2022 versions see's improvements in power and runtime in the same size cases.
Huge range of batteries for all applications and required weights for perfect chassis balance and centre of gravity. All the batteries have a burst current of 120C and have LIHV technology.
As always with Intellect LiPo's they are excellent value for money.
BRCA/EFRA legal as of April 1st 2022.
Includes balance charge leads and connectors. 22.5mm, 270g - Touring Modified.
Specifications:
Capacity | 6000mAh |
Voltage | 7.6V |
Discharge Rate | 120C |
Dimensions (H x L x W) | 22.5mm x 139mm x 47mm |
Weight | 270g |
Connector | 5mm |